Shea Nut Butter Production in Burkina Faso
Overview
The project Shea Nut Butter Production aimed at applying and demonstrating different solar technologies for the improvement of traditional food processing processes. The project was located in Tiakane, in the South of Burkina Faso. It was part of the Solar Food Processing Project, an initiative of the International Solar Energy Society. The initiative was running from 2006 to 2009 and consisted of three phases:
1) the establishment of a network and an internet platform to provide training and information,
2) the active support of projects with potential to transfer technology and know-how and
3) the development of an Solar Food Label as well as the evolvement of follow-up information material.
The Shea Nut Butter Production Project was one of the projects aimed at communicating know-how. It should ensure higher quality in food production and promote the use of solar technology. Specially trained local personnel should produce the technologies, because of that, technical trainings have been included into the project.
The Project
The Shea Nut Butter Project was implemented by the local partner Innovation en Solaire et Métallique ISOMET, who also constructed and installed the solar technologies until the end of 2007 in Tiakane, in the South of Burkina Faso. The target group for this project had been the local women.
The Technology
The technical components consisted of two solar concentrators and 12 solar box cookers as well as a kitchen house.
Processing Shea Nuts
Processing shea nuts into oil and shea nut butter calls for the following steps:
- collecting the nuts
- boiling the nuts to sterilize them
- drying the sterilized nuts
- crushing the nuts
- roasting the nuts
- milling the nuts into paste (oil-rich shea nut butter)
- separating the nut oil from the paste
- purifying the shea nut butter by boiling it to reduce the water content
Boiling, roasting and purifying the nuts could be done by using the solar concentrator. For the drying, simple spreading of the nuts on the floor was sufficient and for the milling of the nuts, a diesel mill was used. Benefits of using the solar concentrators were clear: no smoke, soot or aromas were created that could have been affected the quality of the shea nut butter and its oil.
