Why solar cooling? In many countries, especially in developing countries in the South, with increasing economic development and population growth, demand for cooling is increasing rapidly (e.g. ric Arab Countries - 75% of installed power is used for cooling). Often, this additional electricity load puts further stress on the mostly already shaky grids in these countries, leading to further power cuts. Also, in many areas cooling for agricultural products, vaccines, etc. is an essential need which cannot be served. In this context, there is a lot of potential for solar cooling.
The main arguments for solar assisted cooling (SAC) originate from an energy saving perspective:
- Application of SAC saves electricity and thus conventional primary energy sources
- SAC also leads to a reduction of peak electricity demand this can benefit the electricity network and lead to additional cost savings of the most expensive peak electricity (if applied on a broad scale)
- environmentally sound materials without ozone depletion and no (or very small) global warming potential are used with SAC
- Coincide of solar energy supply and demand in many cases - when it is the hottest and most cooling is demanded, usually the most sun is shining as well.
Solar assistes cooling can be broadly split up in two main applications, depending on the targeted temperature range:
- air conditioning – temperature range of 5-20°C
- refrigeration – temperature range of -20°C to +5°C
State of the Art world wide Solar Air Conditioning 
Despite intensive research over the past decade,SAC has still reached only a very small market penetration. Yet, a well established SAC research society and scientific field are working on further market development.
- Close to 1.000 SAC systems installed worldwide
- Huge variety in sizes and technologies
- Upcoming larger >400kW and very large > 1MW projects
- More and more chiller products in smaller range <25kW
- With around 60% vapor absorption systems (VAM) dominate the market
- Improving system performance
- Early market development
- Small but increasing number of projects by private investors
- Most systems in USA, Germany, Southern Europe and MENA
- Few companies offering complete SAC solutions
- Custom made systems -> acking experience and expertise, very expensive
- Cost reduction expected with increasing standardization, economies of scale and upcoming specialized incentive schemes (e.g. France)
- Could take off in the coming years with increasing energy prices and further experiences in hotter climates (higher irradiation, higher cooling loads)
A range of challenges exist why solar cooling has not taken off so far. In many cases, it is a combination of different issues.
Still, most of the issues are related to the technology. One of the main problems beeing that there is not one single solution and experiences with new applications are collected constantly
- Small capacity VAM units under development, expensive
- Few suppliers for adsorption and desiccant systems
- No packaged solutions for residential and small commercial users available
- Lacking standardization of applications, mostly still tailor-made
- No great variety of medium temperature collectors
- Thermal efficiencies often still low
- Heat rejection systems: often wet cooling tower needed
- Lacking professional skills – high skilled labour needed, also for maintenance
- Still electricity for control systems, pumps etc needed – can be significant
- Over-dimensioning should be avoided – otherwise low efficiency
- Heat rejection systems need a lot of electricity and maintenance
- Auxiliary components not energy efficient
- Maximizing usage (hot water, heating and cooling) important
- System integration and energy management inadequate – combination of subsystems and skills
- Experience in design, control and system operation lacking
- High capital investment costs (2-5 times) compared to conventional systems
- Price range: EUR 2.000-5.000/kWcold
- Payback periods of <10 years under promising conditions possible (< 7 years have already been reached by some systems)
- Often high maintenance costs - depending on technology
- Unfavorable finance environment
- Financial incentive scheme not explicitly designed to fulfill special SAC needs, often same as solar thermal for heating, if any
- Cooling mostly not yet part of policy target and strategies
- Regulatory measures needed
- Lacking knowledge and practical experience of architects, planners and builders
- Lacking (large-scale) experiences and showcases for replication
Solar Thermal vs. Photovoltaic (PV)
New discussion due to decreasing PV prices. Could it be more economical to run vapour compression chiller with a PV module than operating solar thermally powered chillers? The discussion is still going on, there is no clear answer yet available to this question as the answer depends o a range of different thinkable boundary:
- First examples of competitive installations – e.g. Cyprus (very high electricity price)
- Maybe suitable alternative in some cases
- Depending on boundary conditions and objective of cooling – very site specific
- Availability and reliability of grid as storage - if needed
- Storage/ back-up issue
- alternative energy costs (esp. electricity)
- Subsidies and incentives available for conventional power/systems/energy switch, etc.
- Different effect on grids - what do I want to achieve with solar cooling?
- Demand for other energy services – demand for hot water and heating
- Still discussion and research going on in solar cooling community
- Solar thermal and chiller costs expected to decrease with market growth
- Upcoming support schemes for solar thermal cooling
- lower efficiency of PV modules in hot climates but lower maintenance (e.g.)
- Energetically PV less ideal than thermal
Solar Cooling in India
In India, boundary conditions for solar cooling are very favourable: there is more irradiation and at the same time more cooling degree days than in areas where most systems so far have been installed (e.g. USA, MENA, South Europa) - but partly in some regions the climate is also more humid which asks for adapted systems Ideal boundary conditions (high solar radioation, long cooling season). The only drawback are not prohibitive high energy price, yet this is neutralized trough extensive electricity shortages. Many institutions, companies etc. have their own back up systems for electrcity supply, often also for cooling. Indian customers are looking for reliable cooling options - this is a chance for solar applications. Moreover, the cooling demand is growing further which is endangering grid stability even more The total installed cooling load is 35.000MWe (28.7% of installed capacity)
Residential sector – great future challenge
- Penetration level for A/C < 1% only and switch from air evaporation systems expected 
- Lacking affordabel, small scale renewable technologies
- Highest load in non-sunshine hours -> no coincide of supply and demand, challenge of storage
Industrial and commercial sector – short and medium term market
- Larger central systems in place already – solar technologies available for these sizes
- often coincide of loads and solar gains
Solar Cold Storage
- India is looking for cold storages for a range of applications: fishing, agricultural produce, milk and dairy products etc. as vast part of rural areas still lack access to grid electricity. Currently TERI is working on a combined solution, a biomas-solar-hybrid-electricity grid with cold storage, yet this project is still at a pilot phase.
The Ministry of New and Renewable Energe (MNRE) proposed an Action Plan on Solar Coolingin 2009, together with the establishment of a working group on solar cooling. However, the plan has not been followed. There are no updates and the working group is not active anymore.
Because of electricity shortages, comapnies with exhaust heat and own generator have started using VAM systems which are available locally. the VAMs run on gas, wood or exhaust heat. Hence, an established VAM market (around 5 Mio USD) is in place which is one of the main drivers with regards to SAC in India. So far, a hand full of projects has been realised (around 10), mostly R&D and some private (non commercial/green) initiatives are in place, using concentrated solar collectors + VAM
- Solar Energy Center, TERI, IITs,…
- Thermax (3-effect VAM with COP of 1.7-1.8), Baskara Solar, Gadhia Solar,..
- Mamata - only project with evacuated tube collectors, since 2006, little maintenance needed.
- still early pilot phase
- So far no coherent strategic approach, lacking knowledge sharing
- R&D for solid and liquid dessicant systems
- Investment costs 3x higher than conventional systems
- High capital investment and long payback periods (> 7 years) highest drawback
- investors very hesitant regarding investments with payback >3years
- Most feasible for larger systems >100 kW
- Awareness raising needed
- Costs for chillers and solar components are decreasing
- Energy demand for control system and backup not to be underestaimated
Reliability of system and back-up storage
- as the main selling argument for SAC in India is the increased reliability an independence from the grid, a reliable system is key
- Improving quality of chillers and solar components, but still an issue
- Increasing reliability – storage/back-up necessary
- Solar as add on, not total replacement, otherwise very expensive
- Variation in irradiation and diffiulty of prediction - dynamic system needed
- Standardization of storage (cold and heat) necessary
- System design, integration and optimization prove difficult
- maintenance is a great issue
- Smaller VAMs under development, expensive
- Space availability for solar collectors and cooling towers is a challenge
- High humidity and water scarcity – find suitable technologies
- Concentrating collectors (for higher temperature applications) face difficulties at the moment because of high fraction of diffuce radiation (dust, cloud coverage) in some regions
- Used as locally produced but also more expensive than flat plate/evacuated tube
- Achieve higher temperature lift, remove the need for wet cooling towers
- Maintenance issue
- Expensive, performance and tracking issues
- in some regions, non-concentrating collectors might be more suitable, also architectural integration possible, but lower temperatures, hence lower COPs
- Evacuated heat pipes not produced in India
- Efficiency of solar equipment needs to be improved
First Southern Africa Fresnel-solar Cooling system for a Data-Center at MTN Johannesburg
Industrial Solar GmbH provided the leading South African mobile operator MTN (Mobile Telecom Networks) in Johannesburg/South Africa with a solar thermal cooling system. The Fresnel collector powers an absorption chiller which supports the local district cooling grid. Its Cooling capacity lies about 330 kW.
Industrial Solar GmbH is a technology and solution provider for solar process heat and solar thermal cooling. It was founded in 2008 in the environment of the Fraunhofer Institute for Solar Energy Systems in Freiburg, Germany. The solutions of Industrial Solar are built upon its innovative linear concentrating Fresnel collector which is optimized for industrial applications in the medium power range. Industrial Solar has already realized various projects in all kind of industries in different countries. Moreover, Industrial Solar has developed close partnerships with major industrial companies and offers various products and services for industrial applications.Its is also network partner of the Green Cooling Initiative (GCI) which promotes environmental sound cooling solution worldwide.
Solar Cooling in Jordan
Jordan is a country with scarce fossil fuel resources, therefore it imports 96% of its energy at high cost. The demand for electricity almost doubled in the last 10 years (2004: 8.57 TWh; 2013: 14.6 TWh) (International Energy Agency, 2014). This rapid growth is mainly driven by a growing population, the result of an influx of refugees, economic development and increasing living standards. Despite being one of the best locations for the use of solar energy with irradiation 10% above the MENA average, the use of renewables only plays a minor role in the energy mix. The hot and dry climate makes air-conditioning indispensable for economic processes and activities (such as industry, tourism, and healthcare to name a few) and in light of increasing living standards. Cooling needs contribute significantly to the energy demand and are expected to increase along with economic growth and rising global temperatures. Energy prices are a major cost factor for the commercial and industrial sector in Jordan. The government is gradually reducing subsidies, aiming for cost recovery by the end of 2017 and the increasing cost of energy often limits the competitiveness of local economic activities.
The domestic legal framework supports research on alternative technologies for the air-conditioning sector. In line with their commitments under the Montreal Protocol, Jordan is in the process of phasing out the ozone-depleting (as well as climate-damaging) hydrochlorofluorocarbons (HCFCs). The Renewable Energy and Energy Efficiency Law, introduced in March 2012, encourages the use of renewable energy, and aims, amongst others, at doubling the solar thermal energy capacity from 15% to 30%.[[File:|1x1px|alt=Unknown Object]] To realize these objectives, the Jordan Renewable Energy and Energy Efficiency Fund (operational since June 2015) was established.[[File:|1x1px|alt=Unknown Object]]The elimination of electricity subsidies by the end of 2017 will make renewable energy technologies more profitable.[[File:|1x1px|alt=Unknown Object]] In addition, solar cooling is pledged for in the nationally determined contributions (NDCs) submitted in 2015.
Solar thermal applications are already widely used in the field of domestic hot water supply. Climatic conditions are characterized by high solar radiation and hence very suitable for solar cooling – in particular for the use of solar thermal technology solutions. Solar cooling takes advantage of the fact that the demand for cooling correlates with times where high solar irradiation occurs. Such decentralized solutions can offer additional benefits during power fluctuations and outages which are caused by the increasing load in the national grid.
Potentially, solar cooling absorption technologies use up to 75% less electricity than conventional compression chillers. In addition, absorption technology can also be used as a heat pump, and hence save diesel cost during heating period. Further environmental and climate benefits also result from the use of natural refrigerants (e.g. lithium bromide ammonia, and water), virtually eliminating direct greenhouse gas emissions from leakages of refrigerants with high global warming potential.
In 2013, a study initiated by GIZ took a closer look at the solar cooling potential in Jordan and identified a range of key barriers that might hinder market penetration and a widespread application of solar cooling. The most prominent barriers found are the following:
- Higher up-front investment costs compared to conventional systems (since solar system and chiller are required)
- Solar system requires considerable space and its weight must be supported by the building
- Limited local operation and maintenance capacities
- Retrofitting of cooling system requires considerable efforts in planning and system integration
- Missing of reliable data on cooling and heating loads of premises
The full study is accessible here: https://www.giz.de/expertise/downloads/giz2015-en-solar-cooling-jordan.pdf
Work Done so Far
The project 'Solar Cooling for Industry and Commerce' is part of the International Climate Initiative (IKI). On behalf of the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB), and the Jordanian Ministry of Environment, the IKI project ‘Solar Cooling for Industry and Commerce’ is implemented by the Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) with a budget of 3.7 Million Euros.
So far, the project established four pilot installations of solar thermal cooling demonstrating its economic and technical feasibility in the high ambient temperatures.[[File:|1x1px|alt=Unknown Object]] Exhibiting its feasibility increases public awareness on alternative cooling technologies and helps to overcome some of the above mentioned barriers. Intensive capacity development measures in the field of operation and maintenance, planning and installation will support the localization of solar thermal technologies. To reduce initial investment, customized solutions that utilize synergies with already existing water heating systems, for example, are promoted. Such projects and their potential for scaling up support the establishment of sustainable and climate-friendly air-conditioning in Jordan and the region. Direct greenhouse gas (GHG) emissions can be virtually eliminated, and indirect emissions can be reduced up to 75% by operating solar cooling systems with natural refrigerants. To mainstream climate friendly cooling policy advisory services accompany the project activities and e.g. led to the incorporation of solar cooling in Jordan`s NDCs.
Projects sites are located at the German-Jordan University (160 kW)[[File:|1x1px|alt=Unknown Object]], the Irbid Chamber of Commerce (50 kW), the Petra Guest House (160kW) and the Royal Cultural Center (160 kW). All project sites contribute in-kind and in-cash for the installed systems.
Recommendations for Pushing the Market Development for Solar Cooling
Training and awareness raising
- Work with associated associations (solar thermal, chiller manufacturers, society of engineers, architects, etc.) with regards to cooling
- establish a Technical working group on solar cooling with regular meetings
- Training programs for installers, planners of SAC systems
- Provide design tools for them on different levels
- Including SAC in engineering curricular
- Capacity development of architects in order to decrease necessary cooling loads and include solar cooling in their projects as a suitable solution
- broad awareness raising campaigns, lobbying
- Support visible and meaningful demonstration projects (with proven energy performance) to achieve standardization and guidelines, incl. showcases: collecting experiences, showing best practices as basis for awareness campaigns, potentials and limits
- Start keeping statistics on energy demand for cooling (split up industries)
- The market for room air conditioners is growing very rapidly in India. Hence, small SAC units which can mitigate the environmental impact of this trend are especially needed for the Indian market. Develop R&D with focus on small applications.
- Usability of residential solar water heaters for solar cooling (only 1-2 rooms needed)
- Roadmap for (solar/RE) cooling and
- inclusion of cooling into RE/solar targets at national/state level
- Higher incentive in the early market status, reduced incentives when the market has started to take off: investment funds, tax reductions or credit programs with reduced interest rates. Based on standards of achieved energy/ CO2 savings
- Review solar thermal subsidy scheme (often in place) with regards to cooling, adoptions might be necessary to make application viable – maybe special subsidy when connected to heating and hot water, if applicable
- Come up with easy financing mechanisms for solar /renewable cooling
- Phase out subsidies on conventional energies to decrease market distortion
- Inclusion of RE-cooling/SAC in building regulations (new buildings and refurbishment) – obligatory rating scheme for buildings
- Prohibition / discouragement of refrigerant with high global warming potential (GWP)
- IEA Task 38 - Solar Air-Conditioning and Refrigeration -IEA Solar Cooling Position Paper
- IEA Task 48 - Quality Assurance & Support Measures for Solar Cooling Systems
- IEA Task 53 - New Generation Solar Cooling & Heating Systems
- Feasibility checklist for solar cooling projects (European focus)
- Cooling for Agriculture
- ↑ 1.0 1.1 1.2 https://www.iea-shc.org/publications/downloads/IEA-SHC-Solar-Cooling-Position-Paper.pdf Cite error: Invalid
<ref>tag; name "https://www.iea-shc.org/publications/downloads/IEA-SHC-Solar-Cooling-Position-Paper.pdf" defined multiple times with different content Cite error: Invalid
<ref>tag; name "https://www.iea-shc.org/publications/downloads/IEA-SHC-Solar-Cooling-Position-Paper.pdf" defined multiple times with different content
- ↑ Henning, H. (2010) :Solar Air-conditioning and refrigeration. Achievements and challenges. Fraunhofer ISE. Presented at EuroSun 2010. Graz.
- ↑ 3.0 3.1 Sivak, M. (2009): Potential demand for cooling in the 50 largest metropolitan areas of the world. Implications for developing countries. Energy Policy 37 (2009) 1382-1384
- ↑ Singh, S.K. (2011): Solar Refrigeration and Air-conditioning. Solar Energy Center. MNRE. Ppt.
- ↑ DSCL Energy Services Company Ltd. (2010): Trigeneration in India Market Assessment Study .Trigeneration Technology within the Indian Building Sector . Berliner Energieagentur GmbH (editor). Commissioned by GTZ.
- ↑ http://www.commodityonline.com/news/india-tech-breakthrough-in-solar-thermal-cooling-system-40460-3-1.html
- ↑ http://www.solarthermalworld.org/node/1028
- ↑ http://bit.ly/1LfePrw
- ↑ http://www.estif.org/fileadmin/estif/content/policies/downloads/D23-solar-assisted-cooling.pdf