Wind Energy - Physics

Wind Power

The power P of a wind-stream, crossing an area A with velocity v is given by

 [[File:]]

It varies proportional to air density ρ, to the crossed area A and to the cube of wind velocity v. 

The Power P is the kinetic energy

[[File:]]

of the air-mass m crossing the area A during a time interval

[[File:]].

Because power is energy per time unit, combining the two equations leads back to the primary mentioned basic relationship of wind energy utilisation

[[File:]]

The power of a wind-stream is transformed into mechanical energy by a wind turbine through slowing down the moving air-mass which is crossing the rotor area. For a complete extraction of power, the air-mass would have to be stopped completely, leaving no space for the following air-masses. Betz and Lanchester found, that the maximum energy can be extracted from a wind-stream by a wind turbine, if the relation of wind velocities in front of (v₁) and behind the rotor area (v₂) is v₁ / v₂ = 1 / 3. The maximum power extracted is then given by

[[File:]]

where c_p.B'e't'z = 0,59 is the power coefficient giving the ratio of the total amount of wind energy which can be extracted theoretically, if no losses occur. Even for this ideal case only 59% of wind energy can be used. In practice power coefficients are smaller: todays wind turbines with good blade profiles reach values of c_p.B'e't'z = 0,5.

Unit abbreviations

m = metre = 3.28 ft.	HP = horsepower
s = second	J = Joule
h = hour	cal = calorie
N = Newton	toe = tonnes of oil equivalent
W = Watt	Hz = Hertz (cycles per second)

10^{− 12} = p pico = 1/1000,000,000,000

10^{− 9} = n nano = 1/1000,000,000

10^{− 6} = µ micro = 1/1000,000

10^{− 3} = m milli = 1/1000

10³ = k kilo = 1,000 = thousands

10⁶ = M mega = 1,000,000 = millions

10⁹ = G giga = 1,000,000,000

10¹² = T tera = 1,000,000,000,000

10¹⁵ = P peta = 1,000,000,000,000,000

Portal:Wind