Nepal - Energy Efficiency in Industry

Overview

However Nepal is the country with the second largest Hydropower resources in the world, the country is suffering from energy shortage since several years. The power crisis results in scheduled power outages (called load shedding) up to 12 hours per day in the dry season when the run-off-the-river hydropower plant cannot meet the electricity demand.

Particularly, industry is suffering because they have to shut down during load shedding or to run costly fuel based backup systems. The import of petroleum product has increased sharply during the last decade resulting in a trade deficit with India.

However, energy is scarce and expensive it is often not used efficiently and wasted. This article gives an overview about energy saving potentials in eight energy-intensive sectors of Nepal, namely:

1. Brick,
   
2. Cement,
   
3. Cold Storage,
   
4. Food & Beverage,
   
5. Hotel,
   
6. Pulp & Paper,
   
7. Soap, and
   
8. Steel & Metal.

Industrial Sectors

Brick Sector

Sector highlights

Brick is a primary construction material in Nepal. Around 575 Brick kilns are in operations (Status 2006/2007) having a production capacity from 15,000 to 50,000 brick per day. Most of them operates only during dry season from December to June. Clay is the main raw material used in this industry and is available at very low cost. However, brick making is an energy and labour intensive industrial process. Hand moulding of green brick is mostly used. The predominant kiln technology in Nepal is the Fixed Chimney Bull Trench Kiln (FC-BTK). Apart from BTKs, Clamp Hoffmann and Vertical Shift Brick Kiln (VSBK) can be also found.

Nepal brick industry by numbers

Energy Use

Coal is the main energy source used in the brick kilns in Nepal and is mostly imported from India. Small amount of sawdust, fire wood and bagasse are sometimes also used as fuel. The energy cost on product value is 32% for FC-BTK and 14% for VSBK.

Figure: Energy use in Brick kilns in Nepal

Table: Specific energy consumption in Nepalese brick sector

Energy Saving Potential

Thermal energy savings in Nepal’s brick sector is estimated to be 34% for the FC-BTK kiln technology and 4% for VSBK. It is estimated that brick kiln owners could save a total amount of NPR 3.45 Million every year by implementing energy efficiency measures.

Figure: Annual monetary saving potential in brick sector

Energy Saving Tips

Figure: Energy saving tips for brick industry

Cement Sector

Sector highlights

Cement is a commonly used as a basic building material in the country. About 70% of the cement used in the construction sector is manufactured in Nepal. There are two types of cement factories, namely, limestone-based and clinker-based. Limestone-based industry use the raw material limestone, that is abundantly available in Nepal, and burn the clinker and process the clinker to cement. Clinker-based factories import the clinker from India and process it to cement. There are more than 60 cement industries in Nepal; most of them clinker-based. Few new large units have a production capacity between 900 to 1,000 tons per day are in pipeline.

Figure: Nepal Cement Industry by numbers

Energy Use

Main source of energy used in Cement factories is electricity and coal. Limestone-based units use coal for calcination. Clinker-based units use mainly electricity for grinding. Limestone-based cement plants is very energy-intensive with about 48% of energy cost on production value. In clinker-based units on 5% of the cost is due to energy.

Figure: Energy use in cement industry in Nepal

Table: Specific energy consumption in Nepalese brick sector

Energy Saving Potential

Saving potentials are estimated to be around 41% and 49%, respectively for limestone and clinker-based industry. In total Nepalese cement units could annually save about NPR 1.5 Billion by using energy-efficient technologies.

Figure: Annual monetary saving potential in cement sector of Nepal

Energy Saving Tips

Figure: Energy saving tips for cement industry