Tools to Prevent Theft of Panels

From energypedia
Revision as of 22:46, 25 January 2011 by ***** (***** | *****)

Awareness and popularity of solar systems has risen and so has the number of thefts of solar panels. Since the price of the panel amounts up to 50 percent of the investment cost of a PV system, it is most lucrative to steal this part of the installation. In Senegal, for instance, is is supposed that up to 15 percent of the solar panels are stolen.

Several solutions exist to this problem, which differ in feasibility, practicability, price and technical knowledge.


Theft-proof screws

These screws come in several types: most common are screws (or nuts) that break when a certain torque is applied and hey key screws into which a small item (such as a ball or star) is hammered after tightening.

After fastening, these screws cannot be unmounted unless special tools are available. However, only proper usage assures effective protection. The product combination and the way of fastening the screws should thus be tested (best before purchase).

Theft-proof nut and bolt (in this example, the nut breaks)

Flocks of goats

This technique has already been used by the ancient Romans, since geese show the habit to become noisy when they are alarmed. May not be a good idea for panels mounted close to the ground since animals can cause damage to panels, support structure and wiring and / or may pollute the panels.


2. Immobilise the Panels

A company from the US offers panel-embedded smart electronic chips, which lock the panel digitally in the moment the panel is being stolen. The technique starts working automatically, if the power optimisers receive no activation signal from the inverter. This immobilisation of the panels ensures that no power is produced anymore, which makes a reuse of the panels impossible.

Even if the thief does not only steal the panel but also the inverter, the installation becomes unusable, since the solar inverter communicates with the monitoring server via a built-in communication hardware. If the inverter does not receive activation signals from the server for a certain defined period, the inverter gets immobilised.


3. Glueing, Welding or Sealing the Panels onto the available Roof Space

These are not very suitable solutions, since maintenance and replacement become more difficult or even impossible. Moreover, proper air flow may be hindered, which makes panels work more poorly. Furthermore, in a warranty case conditions can probably not be met due to changes at the installation.

Some persons have painted the back of their panels in a very bright colour in order to be able to identify their panel in case of theft.


4. Design a Rack

This means locking the panels into one large block in order to prevent thefts. In fact, this creates problems for maintenance, but also for thieves, since the weight of locked panels is enormous.


5. Use an Alarm via cable connection

This solutions connects all panels of the installation via cable. The ends of this cable are connected to a control circuit, which picks up every manipulation in the cable. This control circuit can be connected with a visual and/or sound alarm, which is triggered if the cables are removed. Obviously, the horn has to be installed in a safe place such that its own cables cannot be cut before.


6. Keep a manual Vigil

The easiest and probably cheapest solution is a night watchman, for example on a rotational basis among the neighbours.


7. Security Fasteners

Using special fastening means like round-headed screws is a simple and cheap method to prevent thefts. Functioning like car keys, customers get a secured access to an exclusive security fastener, which allows only them to open the screws.