Charcoal Production

From energypedia
Revision as of 08:56, 8 April 2011 by ***** (***** | *****)

--> Back to Overview Cooking Energy Compendium

Charcoal is a prime source of energy in most African countries, and is a driving force in their economies. Worldwide charcoal production has increased, rising by an annual 3.7 percent from 1990 to reach 44 million tones in 2000[1]. Surprisingly, policy makers pay little attention to the ways in which charcoal is produced and sold; whether wood used for charcoal burning is harvested in a sustainable fashion. Without coherent policies, almost all charcoal production, transportation and distribution remains informal and unregulated – leading to inefficient and risky production methods. The common issues characterizing the charcoal production chain in many African countries comprise: (i) unregulated/illegal resources (ii) rampant and systemic corruption, (iii) inefficient conversion technologies, (iv) a perception that it is a poor man’s business considered ‘dirty’ and economically unattractive (v) free access to wood resources, leading to deforestation and degradation, (vi) the charcoal business is dominated by a few powerful individuals.

Lessons from eastern Africa's non-sustainable charcoal trade are summarized in the publication: Lessons Learnt from Eastern Africa’s Unsustainable Charcoal Trade. World Agroforestry Centre (2006)


Impacts of charcoal due to underpricing

  • Investment costs for improved kilns (metal chimneys etc.) do not pay off as long as wood remains a free resource. Despite training support, charcoal burners eventually abandon the improved technology. This is the main reason why the improved and highly efficient Casamance kiln has been disseminated since 20 years throughout Africa without success.
  • Tree growing approaches stay ineffective, as planting and maintenance costs must be taken into account, when competing with open access resources. Significant subsidies (e.g. Madagascar: 200 to 300 €/ha) are necessary to provide enough incentive. This holds also true for any investments in natural forest management.
  • Substitute fuels such as kerosene must be highly subsidized to be competitive, as is the case in a number of countries, such as Senegal and Chad.

Despite the growing scarcity of wood, charcoal generally remains underpriced by more than 20% to 50%, relative to its economic cost as only the opportunity cost of labour and capital required for charcoal production and transport are reflected. Undervaluation translates into wasteful and inefficient production and consumption, and creates a formidable disincentive for forest management and tree growing (see box). A World Bank Publication from some years ago still correctly illustrates the problems of underpricing and provides methods for estimating adequate woodfuel stumpage values: Fuelwood Stumpage. Financing Renewable Energy for the World’s Other Half:

Other papers highlighting the importance of adopting a value chain approach include: Analysis of charcoal value chains - general considerations; and Policy and Distributional Equity in Natural Resource Commodity Markets: Commodity-Chain Analysis as a Policy Tool Charcoal consumption is a very controversial issue, as the transformation process from wood to charcoal results in considerable energy loss, requiring significantly more forest resources to produce the same amount of energy. This has led to many countries imposing bans (Kenya, Tanzania, Gambia etc), but with little success, and charcoal use continues to increase with the pressures of growing urbanisation. Charcoal burns more cleanly than wood or dried biomass, producing higher temperatures and it is cheaper to transport and store. For these reasons, interest in charcoal as a fuel is reviving, and steps need to be taken to promote improved charcoal-making technologies and thus reduce the amount of raw biomass required.

The most common types of traditional kilns are earth or pit kilns with efficiencies ranging between 8% and 12 % (Table 7). Because parameters like the hu­mi­dity of the wood used, kiln size, and process control, play an important role, the relative gain of an improved technology ranges between 5% to 50%. See: http://www.fao.org/docrep/X5555E/X5555E00.htm


Table 7: Efficiencies of various types of kiln
Production of 1 kg of charcoal from Kiln efficiency
Traditional Kilns 8- 12 kg wood 8 – 12 %
Improved traditional kilns 6 – 8 kg wood 12 - 17 %
Industrial production technologies 5 – 7 kg wood 20 – 14%
New high-yield, low-emission systems 3 – 4 Kg wood 25 - 33 %






''Table 8: Energy losses converting woodfuel to charcoal for various stoves

  

Stove efficiency

Traditional

Improved

                    

24 %

30 %

35 %

Traditional

8 %

73 %

68 %

60 %

53 %

12 %

60 %

52 %

40 %

30 %

 'Improved'.

14 %

53 %

44 %

30 %

18 %

18 %

40 %

28 %

10 %

-5 %







Publications: </font>

Impacts of Greenhouse Gas and Particulate Emissions from Woodfuel Production and End-Use in Sub-Saharan Africa: http://rael.berkeley.edu/old-site/OA5.1.pdf

Charcoal production is a labour-intensive process, employing a large number of people at different phases of the process and distribution. It is estimated that charcoal production generates between 200-350 person days of employment per Terajoule of energy, compared to 10 person days per Terajoule for kerosene. Sustainable production of wood-based fuels (particularly charcoal) can support rural development through; locally available, affordable and renewable resources, decentralised processing & production, short transport distances with low risks, potential for short-term efficiency improvements (improved stoves, kilns etc.), it can yield a health-dividend, due to reduced levels of smoke, cleaner combustion and easy handling. To be environmentally beneficial, highly efficient kilns and renewably-sourced fuels are required.

To this end, woodfuel policies need to be designed within the context of a sustainable (rural) development approach, and principles of local control and participation adhered to in the planning process. Comparative advantages of locally produced/managed energy sources must be fully exploited to stimulate regional economic growth. Further ways to shape charcoal policies are described in the following paper: "Shaping charcoal policies: context, process, and instruments as exemplified by country cases".
<span />

[1]Tomaselli,I; 2007; Forests and energy in developing countries; Forests and Energy Working Paper No. 2; FAO, Rome



Further information:

Manual for Charcoal Production in Earth Kilns in Zambia:

http://www.bioquest.se/reports/Pdf%20summaries/Cprodman%20SUMMARY.pdf
Review of Technologies for the Production and Use of Charcoal:

<span style="color: rgb(0, 0, 0);" />http://rael.berkeley.edu/files/2005/Kammen-Lew-Charcoal-2005.pdf  

WOODFUEL VALUE CHAINS IN KENYA AND RWANDA Economic analysis of the market oriented woodfuel sector Author: Geoffrey M. Ndegwa (MSc. Thesis, Cologne, September 2010) This research highlights the potential in the woodfuel sector to play a key and significant role in the rural and urban poor economic development of Rwanda and Kenya.

Ndegwa2010 Woodfuel Value Chains in Kenya+Rwanda.pdf

Problems arise at all stages of the charcoal value chain, so a precise understanding of the charcoal value chain provides an excellent entry-point for shaping sound policy frameworks. It offers an opportunity to the various stakeholders to add knowledge, innovation, capital, and technology at each step or link in the value chain. Sound policy can provide checks and balances, creating more balance within and between the sectors, and supporting the intended overarching goals, such as the Millennium Development Goals (MDGs).