Difference between revisions of "Access to Modern Energy"

From energypedia
***** (***** | *****)
m
***** (***** | *****)
(No difference)

Revision as of 09:47, 4 May 2012

General Importance of Access to Energy

Energy is one of the fundamental pillars of human development. Energy is needed for any kind of activities and a key input to all economic sectors such as industry, commerce and agriculture, and important for the provision of social services such as education and health. The wealth of a nation and its inhabitants is closely correlated to the type and dimension of access to energy. The more usable energy is available, the higher the diversity of primary and secondary energy carriers is, the better are the conditions for development of a society and its economy. Thus, improving access to energy is a continuous challenge of governments and development organisations.

Access to energy also plays a crucial role for livelihood. Modern, affordable and sustainable energy technologies and services address key issues related to poverty and human development. Small energy inputs can already have a tremendous impact by helping to satisfy basic needs of poor populations, to improve productivity, competitiveness and employment of marginalised areas and to improve the general quality of life. Despite this, approximately 2,7 billion people, almost half the world's population, are deprived from clean and energy efficient cooking technologies and around 1,4 billion have no access to electricity. The vast majority of those energy poor households live in rural areas where they have to rely on traditional energy carriers and technologies while being out of reach of modern energy services and electrification programs.

Defining Energy Access

There is a general agreement that households which use candles, wick and hurrican kerosene lamps as a sole lighting source and which cook on three stone fires are considered to be energy poor, i.e. excluded from access to modern energy services. However, it has proved to be more difficult to define positively what access to modern energy technologies and services means. The owner of a torch (or flash-light) which he or she uses in addition to candles does certainly not have access to modern energy. But what about small solar home systems providing electricity for a few light bulbs and a radio? Can these small systems be considered as access to modern energy or are they only "illuminating poverty"? Or should "access" mean to have enough electric power to run for example a refrigerator and other household appliances? Then how many and which appliances? Mechanical power for milling grain etc is often a critical energy supply to many small farmers but is “access” having an improved hand grinding tool, or a diesel mill in the village, or the next village? To answer these questions is not an easy task as there is no obvious minimum level allowing a clear definition of access to modern energy technologies and services. Gaining access to improved energy services is not a sudden event, but a continous process of improvement. Thus, any definition of a basic threshold for energy access is in a certain way arbitrary.However, if national as well as international organisations target for improved access, then some agreed definition of “access having been achieved” is necessary.

Some experts argue that in the case of cooking energy the step from biomass (firewood, charcoal) to LPG, gas or electricity and in the case of other energy needs the connection to the national grid should be defined as threshold for access. However, such definitions would have a tremendously negative impact on the strategy and approaches of poverty oriented programs. They would exclude a large number of people, who will under no circumstances obtain grid electricity and LPG in the near to medium term future. It would make the current discrimination of poor households even worse. In fact, strategies focusing on energy access by rapidly extending electricity grid and LPG supply will favor urban areas as it is easier and cheaper to provide electricity and LPG to a densely populated area. Providing grid-based electricity to rural households is much more difficult, slow, and expensive. The same is true for providing LPG. Establishing a distribution system in rural areas is difficult and expensive. Rural households with their typical low electricity consumption and incomes are not attractive clients for a grid-based electricity utility. Even for subsidized programs, grid extension to those households will often not be an economically, technologically and developmentally appropriate solution. Therefore, new access to energy services through grid or gas distribution extension outside urban areas will not happen at large scale and so the goal of universal access on those terms would not be realistic for a foreseeable future.
If the majority of energy poor people shall benefit from international programs it is more appropriate to identify and promote other options to provide basic modern energy services at fairly low investment costs without having to wait for grid electricity. These options are evolving solutions rather than a final solution focusing first of all on the poverty dimension of energy access. The "right"  option depends on whether it is affordable, sustainable and fits the needs of rural and peri-urban households, institutions, and private firms for a certain period. As a minimum requirement it must improve rural living conditions fairly quickly for a large number of people. The temporary solutions may then shift over time until the conditions are satisfied for other supplies, perhaps even grid or infrastructure based to become attractive in the distant future.

If an approach is chosen which intends to end energy poverty fairly quickly for the bulk of the rural and peri-urban population through the use of modern equipment, it is crucial to define basic indicators that represent a considerable improvement of  living conditions of poor households.  For this purpose the different dimensions of poverty should be considered. According to the OECD-DAC Guidelines on Poverty Reduction [1] the life of poor households is charactericed by:

  • low economic capabilities - the ability to earn an income, to consume and to have assets,
  • low human capabilities based on health, education, nutrition, clean water and shelter,
  • low political capabilities including human rights, influence over public policies and political priorities,
  • low socio-cultural capabilities concern the ability to participate as a valued member of a community,
  • low protective capabilities enabling people to withstand economic and external shocks.

Access to energy is relevant to all five dimensions.  In many cases an improved energy supply strengthens  the different capabilities indirectly. The most immediate impacts are achieved through modern cooking technologies, electric light and electric information and communication technologies. Energy efficient, modern cooking technologies improve food preparation and consumption, reduce expenditures and/or collection time for fuels, and reduce indoor air pollution (direct impact on economic, human and protective capabilities). Improved lighting provides children the possibility to study after dark, parents the freedom to do some of their housework during evening hours or to participate more actively in social life (direct impact on economic, human, socio-cultural capability). With bright light all household members generally feel more secure from theft, violence, and animal attacks. Households having electricity can more frequently use mobile phones , radio and TVs which increases  the access to economic, political and cultural information and knowledge significantly(direct impact on economic, human, political, socio-cultural capabilities). Thus, a significant improvement of the living conditions of poor households could be achieved if:

  • all household members can work, study or relax under sufficient bright light for at least 4 hours per day. A light source with an illuminance of 300 lumens (corresponding to the light of a 30 W incandescent bulb) which can be used for four hours a day fullfills this condition.
  • sufficient fuel is available to prepare two typical local hot meals for all household members,
  • whenever needed households can use either a land line or a mobile phone and use a radio and/or small TV for several hours a day, 
  • all energy sources and technologies (lamp, stove) are not hazardous to health especially not emit high amounts of particular matter and fulfill basic safety standards, and
  • expenditures for energy do not exceed 10% of the household income or not require more than 10% of the working hours of a household member  

 

Table 1 is summarizing the indicators and translating them into exemplary figures for energy carriers or technologies.

 
Category Indicator energy technology
Light all household members can work, study or relax under sufficient bright light for at least 4 hours per day which means 300 lumen on houshold level for at least 4 hours a day

kerosene pressure lamp, gas lamp, 9 W CFL lamp, LED lamps of sufficient brightness.

For example, in case of a 9 W CFL lamp around 13 kWh per household and year (9x4x365 Wh) would be needed.


low fire hazard through light equipment safety tested kerosene and gas lamps, electric lamps

low level of particular matters (see also cooking) emitted by light device kerosene pressure lamps, gas lamps, electric lamps
cooking

enough energy to prepare two hot meals per day which means 10megajoule fuel per person per day
(assuming that about 5000 kilojoule is sufficient to prepare a hot meal per person) 

[

1 kg firewood per person per day in combination with an improved coook stove, or 0.3 kg charcoal or 0.04 kg LPG or 0.2 litres of kerosene or ethanol per person per day

Annual mean concentrations of particulate matter (PM2.5) < 10 μg/m3 in households caused by stove
smokeless cook stove, cook stoves with chimney, gas cookers, electric cookers 

low fire hazard of cooking equipment insulated cook stoves, safety tested cook stoves
Information and communications
access to fixed line or mobile phone 
use of a radio for at least 4 hours or a small TV for at least 1,5 hours a day.[2]
[

10 kWh per year and household (7 W x 4 hours x 365 days or 20 W x 1,5 x 333 days)

 

affordability, accessibility

expenditures for energy do not exceed 10% of the household income or do not require more than 10% of the working hours of a household member

low cost fuels and energy technologies and/or highly energy efficient energy technologies 


In extremely hot or cold regions access to modern energy is also urgently needed to regulate the indoor air temperature in huts and houses. In these cases indicators such as maximum or minimum air temperatures have to be defined as basic standard for acceptable living conditions, which may be achieved through fans, ventilators or space heating [3].

Social welfare institutions like schools and health centers have specific energy needs, which depend from the type of services they are supposed to provide. Consequently, social institutions need specific categorized standards for access to modern energy technologies.

The same is true for enterprises. Many shopkeepers only need light to be able to offer their product during dawn. Other may need a refrigators to store perishable products. Blacksmith can provide better services if they can use welding equipment. Thus again, specific access standards have to be defined for the different categories of productive use.

The present paper is focusing on access to modern energy on household level and will therefore not go deeper into the discussion on access to energy for social institutions and productive use.

In addition to the definition of minimum standards there are attemps to develop an energy access index [4]. Such an index would allow to describe different levels of access to modern energy services and to identify energy needs. Based on the index criteria governments and international organizations could decide which energy access level for which target group they want to address with specific programs. The above mentioned criteria would form the threshold beyond which the minimum access to modern energy services starts.  

Complementary remarks

Any definition of energy access is only useful if it is measurable and trackable at reasonable levels of cost and effort. The definition must allow to monitor and evaluate progress and success of projects and help to take actions.

 

Common definitions of “energy access” and “energy poverty” are characterized by the following aspects:
• “access to energy” is commonly mistaken as “access to electricity”;
• energy access is commonly measured in “electrification rate” or access to “modern” cooking fuels such as LPG;
• energy poverty is commonly measured in average kWh consumed per person;


This leads to a situation where national governments plan to increase domestic electricity consumption in order to achieve higher human development. “Cause” and “effect” are basically exchanged and electricity consumption becomes a purpose for itself.
Energy used by (particularly rural) population in developing countries is much more than just electricity (wood products, petroleum products, etc.).


A concept for “energy poverty” has to consider that…
• Energy is not a purpose for itself, but a means to an end: the relevant basic energy services of human life (cooking, space heating, lighting…)
• Basic energy services are required for people to fulfil their basic needs (nutrition, safe drinking water, housing, social services, access of information, and participation in social life…);
• Energy poverty should measure to what extend the fulfilment of basic needs has been undermined (by a lack of energy services). This is a complex assessment beyond an easy indicator such as kWh per person.


A concept for “energy access” has to consider the following criteria
• Availability (physical presence in a suitable distance);
• Affordability (seasonal purchase power; priorities of target groups…);
• Suitability (reliability of access, cultural acceptability, convenience…);
• Energy-diversification of households as a coping strategy;
• Sustainability: Long-term availability of energy services, avoidance of negative economic, social and environmental impacts
• Most important: energy access definitions should avoid technological dimensions and focus on economical dimensions such as energy services / usage. Consumer preferences are defined by specific demand for light, heat, etc.

Given the giant task of combating energy poverty, target-oriented action is required. Quantitative targets facilitate management, benchmarking, monitoring, compliance, verification etc. An international framework like the MDG is best suited to set normative and quantitative access targets for a minimum provision of energy services. Nevertheless, it is important to respect and support the definition of national objectives and political targets.

Distribution of Access

Electrification has the potential to open doors to many essential services such as refrigeration in clinics, lighting in schools and homes, battery charging and diversified livelihoods, yet over a quarter of the world's population lack access. There are over 30 countries where more than half the population are without access[5].

Of the 32 countries with an electrification rate of less than 50%, 26 are located in sub-Saharan Africa where the average rate is just 26%. This geographic distribution is not only evident on a national level but also within countries, where rural areas have considerably lower electrification rates. In sub-Saharan Africa the rural electrification rate is just 8%[5].

In South Asia the electrification rate is 60-65%. Nevertheless, the absolut number of unelectrified households is as high as in Sub-Saharan Africa. Most of these households live in India. Per capita consumption of electricity in South Asia is the lowest after Sub-Saharan Africa.

In addition to insufficient access to electricity, over 3 billion people worldwide are reliant on solid fuels, [http://www.who.int/indoorair/en/ including biomass fuels such as wood, dung, agricultural residues, and coal, for cooking. In at least 45 countries, primarily in sub-Saharan Africa and developing Asia, more than three-quarters of the population are dependent on these solid fuels. As with electrification, those in rural areas have far lower access to modern fuels and services[5].

Benefits of Energy Access

Energy can be a powerful vehicle for the provision of essential services such as education, healthcare and clean water. The time burden associated with essential tasks is an important signifier of energy-poverty yet energy technologies can reduce the disproportionate time spent by poor households on basic activities. Access to energy services can help communities meet basic needs and stimulate social, economic and environmental development[5].

Livelihood benefits

Energy access has the potential to alleviate poverty through stimulating rural livelihood options. This can occur via the establishment of new energy-based industries, creating employment in manufacture, construction and maintenance. Energy access can allow households to engage in a more diverse range of income-generating activities as well as make pre-existing activities more efficient. In particular, this diversification will make rural families far less dependent on natural resources as their sole form of income. Nearly 60% of the population in low income countries rely on agriculure, forestry and fishing for their livelihoods. This figure rises to over 90% in some countries. With the necessary infrastructure to ensure sustainability, new livelihoods developed via energy access can have a huge impact on long term poverty reduction[5].


Health

Modern energy access has the potential to improve health in rural areas both directly- by powering healthcare facilities- and indirectly, by providing cleaner fuel sources and reducing debilitating labor.
The inefficient combustion of solid fuels combined with inadequate ventilation contributes to poor health in many households. These high levels of indoor air pollution often result in decreased pulmonary function, particularly amongst women and children. According to the WHO, approximately 1.6 million premature deaths are attributable annually to indoor air pollution, making it the second largest environmental health risk factor in the world. Indoor air pollution is also responsible for 38 million disability adjusted lost years (DALY), where one DALY represents one healthy year of life lost by an individual due to disease or adverse health conditions, which in turn has numerous impacts on income generation, livelihoods and education.
Furthermore, this dependency on biomass resources such as fuelwood and the lack of intermediary means of transportation means that increasingly large distances are traveled with these heavy loads, often resulting in debilitating back conditions, particularly impacting women and children.
This is also having widespread implications for the natural environment in vulnerable regions, with biomass fuel sources rapidly depleting, placing even greater pressure on the poor just to meet basic needs[5].


Clean Water

Energy based technologies can help ensure that communities have access to one of the most basic necessities, clean water, by aiding in both the distribution and purification of water supplies. 17% of the world's population do not have access to an improved water source with this value rising to over 45% in sub-Saharan Africa[5].

This lack of a clean and steady water supply limits agricultural activity and results in easily preventable diseases, poor hygiene and inadequate sanitation. The World Health Organization found unsafe water, hygiene, and sanitation to be the world's largest environmental health risk factor[6] annually responsible for over 1.7 million deaths. Energy technologies such as solar, wind and hydraulic ramp pumps[7] can aid in redistributing the water supply to the areas in which it is most needed whilst application of simple solar distillation techniques can improve water purity.

Education

The impacts of energy access on education are often indirect, with one linkage being to the issue of time burden. Improved energy resources can reduce the time and labor required to achieve certain tasks such as collecting fuelwood and water as well as mechanizing many activities. This in turn could lead to increased enrolment of children in schools, since their household roles are no longer as consuming. In addition, access to lighting in the home increases the time available for study and hence may impact on achievement levels. Lighting at the schools themselves can remove restrictions on school times making night classes a viable possibility or allowing schools to double as community centers in the evenings. Electrification can also affect education infrastructure through the integration of modern resources such as computers and internet access[5].


What is required to improve energy access

In a broad sense almost all energy investments can be considered as contributing to improved energy access. Political reforms of the energy sector reform can enhance investments in power generation and distribution and in other forms of energy which may benefit the poor. Generation and Transmission projects may form the base for rural electrification. However, most of these investments have only an indirect effect on the access rates. In a more narrow sense only those activities can be considered to target on energy access which directly reach households without modern energy services.  
Many of the same elements necessary for any successful development intervention are applicable to the case of sustainable rural energy provisions. Developers should ensure that the technology itself is affordable and appropriate. Participation of the communities in question must be key at all stages and access to energy provisions and services should be equitable. In addition, local capacity should be built in order to ensure the long term sustainability and replicability of the scheme[5].

Affordability

Affordability and payment mechanisms are key considerations when assessing energy interventions. The poorest households often spend a disproportionate amount of their income on energy. Amongst those earning less than $3000 annually the percentage of total household expenditure spent on energy can be as high as 12%. In most cases it is the capital costs associated with shifting to a new energy carrier or end use technology that present the greatest barrier for poorer households. To remediate this, many payment mechanisms are possible ranging from subsidies to loans to upfront payments. These mechanisms need to be tailored to the specific needs of lower income households[5].

Most[8] still favor conventional centralized energy schemes such as fossil fuel plants or large scale hydro power. However, for the many residing in rural locations a smaller scale decentralized approach is far more likely to meet their needs. It is often economically unfeasible to extend the national grid to low density rural communities, particularly when combined with the relatively low energy consumption of these populations. In such situations, decentralized sources are the only feasible option. When combined with the drive for "sustainable energy" renewables become particularly attractive.

i.e.[7] energy technologies which do not supply to a national grid, can take a number of forms including diesel generators, micro-hydro schemes, wind turbines and solar photovoltaic. The most suitable technology is dependent on a combination of physical, economic and social factors.

Participation

A decentralized approach to energy interventions led by local needs and contexts is important, particularly with smaller communities and rural populations. Starting with the people and not the technology can lead to improved and more widely disseminated energy technologies. Even Principle 10 of the[9] states that "Environmental issues are best handled with the participation of all concerned citizens. Each individual should have (information) and the opportunity to participate in decision making processes." Employing a participatory approach underpins every aspect of ensuring the success of an energy project.

Appropriate Technology

Technology in itself is not the cure-all to rural development issues. In fact, installation of the same technology within different contexts can often yield contrasting results. There is no best-fit solution to energy needs, and carriers must be weighed carefully against the local situation, capabilities and preferences.

For example the initial focus should be on modernizing existing needs before introducing new services. In many rural areas the main household energy need is for cooking purposes. The chief use of electricity is for lighting, which, although important, tends to be a much lower priority amongst households. Despite this rural electrification is often higher on the agenda of many governments and international agencies, possibly due to the relatively high profile and kudos of electrification programs compared to cooking.

Access and Equity

Access to modern energy services can potentially have a huge impact on poverty alleviation. Despite this not all energy projects have the desired effect on the communities in which they are implemented. Energy planners need to integrate social sustainability factors within projects including: the distribution of households able to access the resources; equality of access within these households; the potential marginalization of certain groups such as women, the young or old, the very poor; and the sustainability of the livelihoods promoted by energy access.

The energy needs of rural communities are not uniform. Income, cultural background, livelihood choices and family structure can all play roles in determining particular requirements and situations.

Intra-household energy use is often just as dynamic as that between households and once again a comprehension of specific needs, situations and behaviors is necessary. Women tend to bear the burden of the human energy crisis taking responsibility for activities such as pumping water, collecting firewood and other fuels, cooking and their family's healthcare (see table below). In addition there are often distinctions in access to credit or land as well as training opportunities. As a result men and women may have very different priorities regarding energy services.

Replicability

The replicability of a particular project is also key to ensuring long term success and proliferation especially in terms of the transfer of technology and knowledge to local communities. For example, has capacity been built sufficiently enough that local people are able to take responsibility for the maintenance and upkeep of the project? Have they acquired the necessary skills which will allow them to act as future facilitators on similar interventions in neighboring areas? Have local industries been developed and appropriate technologies been used such that local communities are not reliant on the import of materials?

Energy for Development

Energy access in itself is not a panacea to rural poverty issues. A successful intervention has the potential to stimulate development by modernizing existing needs and introducing new services. However the long term success of any energy project requires social sustainability to play a central role which can only be achieved by starting from the context of the users rather than the technology.

Further information

UNDP-WHO report on energy access in developing countries: review of LDCs & SSAs (November 2009)

Poor People’s Energy Outlook 2010 by Practical Action

 

Typology of energy access 

terminology service package kWh pppa typical system counting
FULL all you'd want 500 grid 100% + report
ADVANCED basic + tv, fan, video… 50 minigrid 100% + report
BASIC light, radio, telephone 5 shs 100%
PARTIAL less light, radio, phone 1-2 bcs < 100%
MINIMUM even less light 0,5 pico PV << 100%