Difference between revisions of "Comparative Financial Analysis of Irrigation Solutions"

From energypedia
***** (***** | *****)
***** (***** | *****)
m
Line 115: Line 115:
  
 
<span lang="en-us">The share of irrigation water costs within the total production costs of a crop budget varies in dependency from the irrigation method and local cost levels. Simple surface irrigation services could account for as, little as 5 – 10% of the total production charges in subsidized public irrigation schemes. Here, the farmer usually pays a water tax that may be a flat rate or </span>a small volumetric charge. At the other end, in commercially operated pressurized irrigation schemes irrigation charges could account for up to 60% of the actual production costs of a crop. Common percentages are 20 – 30% in surface irrigation systems and 30 – 40% in pressurized irrigation systems.<br/>The level of charges obviously determines the choice of crops and their rotation to a very large extent the higher the variable charges, the higher the need for an increased productivity.<br/>
 
<span lang="en-us">The share of irrigation water costs within the total production costs of a crop budget varies in dependency from the irrigation method and local cost levels. Simple surface irrigation services could account for as, little as 5 – 10% of the total production charges in subsidized public irrigation schemes. Here, the farmer usually pays a water tax that may be a flat rate or </span>a small volumetric charge. At the other end, in commercially operated pressurized irrigation schemes irrigation charges could account for up to 60% of the actual production costs of a crop. Common percentages are 20 – 30% in surface irrigation systems and 30 – 40% in pressurized irrigation systems.<br/>The level of charges obviously determines the choice of crops and their rotation to a very large extent the higher the variable charges, the higher the need for an increased productivity.<br/>
 +
 +
<br/>
 +
 +
{{Go to Top}}<br/>
  
 
= Financial Service Requirements<br/> =
 
= Financial Service Requirements<br/> =
Line 124: Line 128:
 
Due to the high interest rates and the short repayment periods loans often constitute a severe problem for the cash flow of a farm household, in particular in years with moderate and sub-average yields and negative market price dynamics.<br/>The very high investment costs related to modern pressurized irrigation systems are usually outside the financing capacity of small and medium size farms as the underlying capital requirement outpaces the annual earnings of these households by large. These households always depend on subsidies and/or financing services to be able to shoulder the investment.<br/>
 
Due to the high interest rates and the short repayment periods loans often constitute a severe problem for the cash flow of a farm household, in particular in years with moderate and sub-average yields and negative market price dynamics.<br/>The very high investment costs related to modern pressurized irrigation systems are usually outside the financing capacity of small and medium size farms as the underlying capital requirement outpaces the annual earnings of these households by large. These households always depend on subsidies and/or financing services to be able to shoulder the investment.<br/>
  
= References<br/> =
+
<br/>
  
*[[:File:Stocktaking and Analysis Report - Final Draft.pdf|Manual and Tools for Promoting SPIS – Stocktaking and Analysis Report]]<br/>
+
{{Go to Top}}
  
 
= Further Information<br/> =
 
= Further Information<br/> =
Line 140: Line 144:
 
*[[Sprinkler Irrigation|Sprinkler irrigation]]<br/>
 
*[[Sprinkler Irrigation|Sprinkler irrigation]]<br/>
  
 +
<br/>
 +
 +
{{Go to Top}}
 +
 +
= References<br/> =
 +
<ul style="list-style-image: url("images/bullet-icon.png"); font-size: 13.6px;">
 +
<li>[[:File:Stocktaking_and_Analysis_Report_-_Final_Draft.pdf|Manual and Tools for Promoting SPIS – Stocktaking and Analysis Report]]</li>
 +
</ul>
 +
 +
[[Category:Financing_and_Funding]]
 +
[[Category:Agriculture]]
 +
[[Category:Irrigation]]
 +
[[Category:Productive_Use]]
 
[[Category:Powering_Agriculture]]
 
[[Category:Powering_Agriculture]]
[[Category:Productive_Use]]
 
[[Category:Irrigation]]
 
[[Category:Agriculture]]
 
[[Category:Financing_and_Funding]]
 

Revision as of 10:05, 13 January 2016

Generic Costs of Irrigation Solutions

Costs and financial implications of different irrigation solutions available at any given location around the world vary according to the specific system design and the local prices for the system components. Furthermore, impacts of the different irrigation solutions on farm management vary accordingly.

The cost of a specific irrigation solution is an aggregate of a number of factors that need to be assessed financially:

Table 1: Main cost factors and cost components to be considered for irrigation systems

Cost factor
Cost component

Land development/ earthworks, grading

  • Capital costs (acquisition, investment)
  • Financing costs (loan services)

Water source/ headworks, well


  • Capital costs (investment)
  • Financing costs (loan services)
  • Depreciation costs (replacement)


Pumping system

Water conveyance system/ canal, pipeline

Water distribution system

System and irrigation management

  • Fixed costs (subscriptions)
  • Variable operation costs (fuel/electricity, fees)

Labour

  • Labor costs (system operation, irrigation management)















These factors cannot be compared on a globalised way, but the impact of different irrigation solutions on these factors can be generalized as illustrated in the figures below:

Impact of irrigation methods on investment and operational costs related to land and water source development
Figure 1: Impact of irrigation methods on investment and operational costs related to land and water source development

Surface irrigation approaches require a high degree of land development, but they usually work with simple water abstraction installations such as derivation weirs or river side intakes. Pressurized systems require often a bore well or a deep dug well implying higher initial investment costs. In turn, sprinkler and drip irrigation do not require sophisticated land development (Figure 1).

As for the pumping system, water conveyance and water distribution (Figure 2), pressurized systems require a heavier investment and induce moderate to high operational expenses due to the energy consumption for pumping. Sprinkler irrigation implies high operational expenditure as the systems operate on higher pressure rates as compared to drip irrigation and require regular replacement of mechanical sprinkler equipment. Surface irrigation methods do not induce high operational expenditure as water flow is usually by gravity and secondary level distribution is done manually.

Impact of irrigation methods on investment and operational costs related to pumping system, water conveyance and distribution (no bulk supply)
Figure 2: Impact of irrigation methods on investment and operational costs related to pumping system, water conveyance and distribution (no bulk supply)

The actual cost of operation of pressurized irrigation systems is low due to the automation. In particular micro-irrigation systems can be operated with minimum of personnel. Sprinkler irrigation systems require a higher degree of labor input due to the need to move the sprinkler units. Surface irrigation methods are laborintensive due to the manual water management on field level (Figure 3).

Impact of irrigation methods on system and irrigation management and labor requirements.JPG
Figure 3: Impact of irrigation methods on system and irrigation Management and labor requirements

The consideration of all relevant factors and components of capital and operational expenditure will always result in a specific value for the cost of water in a given system, which is one of the key parameters when comparing irrigation development options, Traditionally, such a comparison was mostly made based on the cost per cubic meter (m3) irrigation water. However, when comparing gravity flow and lift irrigation systems the specific pump head would have to be considered. It is hence useful to calculate the cost per m3 x head (m) = m4.

Financing Impact on Farm Budgets

Irrigation water is an important production factor in agriculture and a market oriented agricultural production without irrigation is not possible in many parts of the world. The extent to which farm households depend on irrigation for their production depends on their geographical or rather agro-climatic location, local hydrological and soil conditions and on the actual crop water requirements.

The actual irrigation method or rather the capital and operational costs related to the specific irrigation method has an impact on three parameters via a number of factors:

  • Capital costs and related financing service charges;
  • Operational costs;
  • Labor costs.

These costs impact the farm budget on several levels. Capital costs and financing service charges for investments (land development, irrigation infrastructure, and irrigation equipment) are often budgeted on an aggregate level, not specifically allotted to individual crop margins as they constitute fixed costs of the farm enterprise.

In practical terms, it would be more pertinent to calculate dynamic costs of the unit irrigation water including capital costs and related financing services in order to have a clear allocation of these costs to the actual crop margin calculation. This can only work, however, if the annual quantities of irrigation water utilized by a farm enterprise do not vary too much.
Operational costs and specific labor requirements are usually taken into account on the level of crop gross margins as they constitute variable costs depending on the actual cultivation.

The share of irrigation water costs within the total production costs of a crop budget varies in dependency from the irrigation method and local cost levels. Simple surface irrigation services could account for as, little as 5 – 10% of the total production charges in subsidized public irrigation schemes. Here, the farmer usually pays a water tax that may be a flat rate or a small volumetric charge. At the other end, in commercially operated pressurized irrigation schemes irrigation charges could account for up to 60% of the actual production costs of a crop. Common percentages are 20 – 30% in surface irrigation systems and 30 – 40% in pressurized irrigation systems.
The level of charges obviously determines the choice of crops and their rotation to a very large extent the higher the variable charges, the higher the need for an increased productivity.


►Go to Top

Financial Service Requirements

Capital employed in a farm enterprise is seldom available from the equity of the farm owner or household, in particular when considering small and medium sizeenterprises. Large holdings, which are often producing in an industrialized way, may be considered to be an exception in this regard.

Due to the high interest rates and the short repayment periods loans often constitute a severe problem for the cash flow of a farm household, in particular in years with moderate and sub-average yields and negative market price dynamics.
The very high investment costs related to modern pressurized irrigation systems are usually outside the financing capacity of small and medium size farms as the underlying capital requirement outpaces the annual earnings of these households by large. These households always depend on subsidies and/or financing services to be able to shoulder the investment.


►Go to Top

Further Information

More details on the irrigation types mentioned in figure 1–3:


►Go to Top

References