Difference between revisions of "Hybrid-Systems Containing Wind Energy"

From energypedia
***** (***** | *****)
***** (***** | *****)
Line 43: Line 43:
 
=== Choosing an optimal design for Wind Hybrid Systems <br>  ===
 
=== Choosing an optimal design for Wind Hybrid Systems <br>  ===
  
=== Installation costs and live cycle-costs ===
+
=== Installation costs and live cycle-costs ===
  
==== Applications <br>T/C Stations<br>Small desalination systems<br>Water pumping<br>Domestic to community level electrification<br>Hybrid Mini Grids <br><br> ====
+
=== Applications  ===
 +
 
 +
==== <br>T/C Stations ====
 +
 
 +
==== <br>Small desalination systems ====
 +
 
 +
==== <br>Water pumping ====
 +
 
 +
==== <br>Domestic to community level electrification ====
 +
 
 +
=== <br>Hybrid Mini Grids ===
 +
 
 +
<br><br>
  
 
=== References  ===
 
=== References  ===

Revision as of 16:32, 4 July 2011

The term wind hybrid system describes any combination of wind energy with one or more additional sources of electricity generation (e.g. biomass, solar or a generator using fossil fuels). Hybrid system are very often used for stand-alone applications at remote sites. For this reason the article focusses on stand-alone hybrid systems containing storage or diesel-backup.

The combination of renewable energy technologies allows a more balanced electricity supply during day/night and seasonal changes: At most sites wind speed is low, when the sun is shining and reaches higher values on cloudy days. Thus the amount of energy generated by wind energy reaches its maximum in the winter months, while the output of PV-cells is significantly higher in the summer. Other important examples are Wind-Diesel systems often used in remote areas. A diesel generator will be used as backup, if the electricity demand can not be covered by the installed wind turbines. Regulation and conversion of the available energy sources is a central issue planning a wind hybrid system. Many hybrid systems are uses as stand-alone off-grid applications.[1]

Description of a wind hybrid system

Wind hybrid-systems generally consist of generating units, storage facilities and system electronic devices[2]:

  • one or more wind converters of x0 kW
  • one or more other electricity generation options either using renewable energy (e.g. Photovoltaic Panels) of fossil energy sources (e.g. diesel generator)
  • an energy storage device
  • an AC/DC rectifier of xr kW in case the energy storage installation operates on DC current (e.g. all types of batteries)
  • a charge controller of xc kW
  • a Uninterruptible Power Supply '(UPS) of xp kW in order to guarantee high quality AC electricity generation
  • a DC/AC inverter of xp kW

Energy storage

Hybrid systems contain an energy storage device to store the surplus energy during times of high energy production, which can be used for supply when production from renewable sources is low (e.g. no wind). For this reason, the size of the device is often described by the period of time in hours h0 the average load can be covered using the storage as the sole source of energy. Other important characteristics are the overall efficiency of the storage device (determined by the loss of energy during the charge and discharge-process), the output voltage Ub and the maximum permitted discharge[3].

Lead-acid batteries today are the most common technology solution used in hybrid energy systems. There are several alternatives like flywheels, pumped hydro storage, hydraulic storage and fuel cells.

System electronic devices

In case the energy storage device consists of batteries, the three-phase AC current generated by a wind turbine has to be converted in a DC current for charging. This task is achieved by an AC/DC rectifier of a nominal power xr corresponding to the rated power of the wind turbine x0.

The AC/DC rectifier connects the generating units with the DC/DC charge controller of a rated power of xc charging the battery system with a charging voltage Ucc. Besides the charge controller distributes the incoming energy between the charging process and other DC loads which have to be covered within the hole hybrid system. This description is valid for systems using batteries as energy storage device. For a storage fed by an AC current (e.g. pumped hydro storage) the output of the generating units certainly does not have to be converted. Nevertheless in this case a controlling unit is needed for distribution of energy between storage and system loads.

The stored in the batteries has to be reconverted into AC current before it can be used to supply a load. Thus a DC/AC inverter has to be included.

Advantages of wind hybrid systems

Disadvantages of wind hybrid systems


Wind-Diesel hybrid systems

Wind-PV hybrid systems

Wind-Hydro hybrid systems

Choosing an optimal design for Wind Hybrid Systems

Installation costs and live cycle-costs

Applications


T/C Stations


Small desalination systems


Water pumping


Domestic to community level electrification


Hybrid Mini Grids



References

  1. U.S. Department of Energy (2011) Small "Hybrid" Solar and Wind Electric Systems, retrieved 17.6.2011 [[1]]
  2. Kaldelli (2010) Stand-alone and hybrid wind energy systems - Technology, energy storage and applications, Woodhead Publishing
  3. Kaldelli (2010) Stand-alone and hybrid wind energy systems - Technology, energy storage and applications, Woodhead Publishing

External links

  • Wikipedia: Wind-diesel hybrid power system (contains a list of communities using wind-diesel systems), retrieved 17.6.2011 [[2]]