Quality Assurance of Improved Cookstoves (ICS)

--> Back to Overview Cooking Energy Compendium

This article needs to be revised. Please rewrite the article according to the specifications below. Only remove this maintenance box after a thorough revision of this article. See the discussion page for more details or start a discussion there. In particular the following aspects and passages have been specified to be in need for a revision: (Please help to fill this page).

Production Systems and Quality Management

There are three main production systems for stoves:

• Decentralized, individual construction of fixed stoves on site
• Centralized mass production (or small-scale community production) of portable stoves and/or stove liners in a workshop
• Industrial production

A wide spectrum of manufacturing methods falls between these two systems; for example, village stove builders may use prefabricated parts for their locally made mud stoves. The one extreme is the user who builds his own stove directly in his house from locally available material. The other extreme is the centralised production of stoves.

The first system is mostly used in rural areas by informal sector entrepreneurs, whereas the second system is often associated with urban settlements and the formal sector. Each of these approaches to production requires a project to be run in a way that optimises the number and quality of stoves that are made. It will require appropriate training methods and quality control systems. The third system is based on large scale production facilities in the formal sector.

Decentralized Stove Production Systems

A good example of the development of a decentralized production system is the mud rocket stove for rural households in Uganda and Kenya.

The two-pot mud rocket Lorena  stove This is a massive stove that cannot be transported (see stove fact sheet on the right). It is built with locally available material directly on site. The characteristic of this system is: No special equipment is necessary and almost no prefabricated parts are required Use of locally available materials The stove builder has to visit the house several times, for construction, final revision including removing of the moulds and smoothing the outside, and finally for the first firing. The stoves lifetime is very susceptible to the material used and proper handling. For proper performance the stove needs ongoing maintenance, which is mainly carried out by the users.

https://energypedia.info/images/thumb/9/95/Final_rocket_lorena_uganda_stove_factsheet_2008.pdf/page1-180px-Final_rocket_lorena_uganda_stove_factsheet_2008.pdf.jpg

Because the stove has a limited life and the stove builder has to visit the house several times:

• There are many stove builders, mostly living locally. They all have to be trained and their skills and training have to be documented.
• A monitoring system has to be set up to assure high stove quality not only when the stove is installed, but also during its lifetime (or at least during the first months of its use).
• Users have to be involved in the stove installation and monitoring system, as they will be required to conduct periodic maintenance.

In Uganda and Kenya a quality and monitoring system was setup with the following components:

• Certification of quality stove builders: after training and independent construction of 10 stoves, a builder is qualified as a ‘commercial stove builder’ and receives a badge.
• Monitoring personnel are selected and have the following tasks: 

- To monitor the quality of the stoves by unannounced household visits using a checklist:	https://energypedia.info/images/thumb/b/b8/Kenya_rocket_mud_stove_check_list_for_monitors1.pdf/page1-180px-Kenya_rocket_mud_stove_check_list_for_monitors1.pdf.jpg
- To monitor regularly the number of stoves constructed and used
- To ensure that each home equipped with a new stove has received the user guidelines and knows how to maintain the stove.

The Pyramid Strategy – a training method for capacity development of stove producers in Kenya (2007) Source: PSDA, Kenya

https://energypedia.info/images/thumb/2/20/En-pyramid_training_ke-07-2007.pdf/page1-180px-En-pyramid_training_ke-07-2007.pdf.jpg

Uganda: CONSTRUCTION MANUAL FOR HOUSEHOLD ROCKET STOVES for use as a training tool for stove artisans HOW TO BUILD THE HOUSEHOLD ROCKET LORENA STOVE HOW TO BUILD THE SHIELDED FIRE ROCKET STOVE	https://energypedia.info/images/thumb/9/93/GTZ-HOUSEHOLD_Stoves_Construction_Manual_June_2008.pdf/page1-180px-GTZ-HOUSEHOLD_Stoves_Construction_Manual_June_2008.pdf.jpg
Versión français: Guide français de foyer rocket en banco Uganda, 2008 MANUEL DE CONSTRUCTION DES FOYERS AMÉLIORÉS EN BANCO POUR LES MÉNAGES (Titre original: THE ROCKET SHIELDED FIRE STOVES)	https://energypedia.info/images/thumb/e/eb/Guide_fran%C3%A7ais_de_foyer_rocket_en_banco_Uganda_2008.pdf/page1-180px-Guide_fran%C3%A7ais_de_foyer_rocket_en_banco_Uganda_2008.pdf.jpg
Another example is the Inkawasi stove, produced in Peru: Manual de Capacitación e Instalación de Cocinas Mejoradas	https://energypedia.info/images/thumb/4/47/GTZ-manual_instaladores-Cocina_inkawasi_familar-Peru-small.pdf/page1-180px-GTZ-manual_instaladores-Cocina_inkawasi_familar-Peru-small.pdf.jpg
MANUAL PARA LA CONSTRUCCIÓN DE COCINAS MEJORADAS MALENA, Bolivia 2009	https://energypedia.info/images/thumb/9/92/GTZ-Bol-MANUAL_MALENA_2009_reduziert.pdf/page1-180px-GTZ-Bol-MANUAL_MALENA_2009_reduziert.pdf.jpg

Centralised Stove Production Systems

Portable stoves, made of metal or ceramic, are generally produced in workshops or factories and then sold directly to the end users either directly from the factory, via wholesalers and retailers, or through distribution organisations. Generally, this results in a small number of producers. In this case a quality management system has to focus on:

• the skills and potential of the producers
• the stove itself

Quality Management

At the producer level, this includes selecting the right producers and ensuring that they are suitably qualified. Projects supported by GTZ have developed several methods to select the most appropriate producers using the following criteria:

• Education and skills including basic literacy, artisan skills, entrepreneurship and professional experience.
• Their level of interest and the compatibility of stove production with their current employment.
• The availability of workshop space and access to basic commodities.
• Personal factors, such as reputation, communication skills and reliability.

-> See: The https://energypedia.info/images/thumb/2/28/Selection-criteria.pdf/page1-180px-Selection-criteria.pdf.jpg The selection criteria sheet developed in Ethiopia

After being selected, producers have to be given the support they need to produce the newly introduced technology through:

• Training in special technical skills, entrepreneurship, quality management
• Financial support; for example, a loan, credit, or a grant
• Starter packages with moulds, tools, manuals, tables of measures

Once the producers have been selected, and have been provided with skills through workshop training schemes, a quality control system should be established, as shown in the table below.

Components of a Good Quality Control System

Testing and certification of design models or prototypes	The GTZ projects in the Peruvian and Bolivian Andes, for example, contracted the Aprovecho Institute to get Benchmark Certification for all the stoves used in the project [see certification sheets]. After approval of the design model it has to be assured that all stoves produced later have the same quality as the prototypes.
External control of the stove quality and the production organisation.	In some cases this is only done during the initial introductory phase by the project. To maintain a high quality over a long time it is recommended that a constant quality control system is set up. In Burkina Faso, every month an inspector visits the producers and checks the stoves. In Malawi, stoves are regularly checked by the project or by the Department of Energy. If the producer maintains a high quality for a long period of time, only random samples are checked
Giving the stove a brand name	The Malawian stoves logo indicates by flames and an L-shaped letter that the stove is built to a rocket stove principle.
https://energypedia.info/images/b/b0/Logo1fin.JPG	&nbsp https://energypedia.info/images/f/f2/Logo2final.JPGhttps://energypedia.info/images/0/08/Logo3final.JPG                                                                                    Branding stoves through distinctive logos (Malawi, Mali, Burkina Faso; Source: GTZ)
Identification of every stove with serial number	In Malawi, each stove leaves the production site with a serial number and a certificate that serves as warranty (granted by producer)
https://energypedia.info/images/d/d4/Certificatefinal.JPG	&nbsp https://energypedia.info/images/4/4d/Serialnrfinal.JPG                                                                                                          Certification of producers and serial numbers of stoves in Malawi (Photos: GTZ)
Systematic registration of the stoves by the producer, when sold to whom	These records are important to document the project’s impact. And they help the stove producer - even if they initially refuse to keep records. They get a better overview about the market and can adjust the number of certificate plates or labels to the real number of produced stoves. A record booklet can be used by illiterate people as shown in the example from Burkina Faso (see picture below).

-> https://energypedia.info/images/5/57/Jetztaber.JPG

 Page of a record booklet with stove images. Photo: GTZ Burkina Faso

Although monitoring and control of these ‘over the counter’ technologies at the workshop gate is easy to operate, it is very difficult and laborious to assess the later use, performance and lifetime of the products in the end users household.

Further Information

Andrea Reikat: GTZ FAFASO: Le Systeme de suivi (presentation)
GTZ ProBEC: Institutional Stoves in Malawi(presentation)	https://energypedia.info/images/thumb/4/4d/En-probec_institutional_stoves_mw-2007.pdf/page1-180px-En-probec_institutional_stoves_mw-2007.pdf.jpg

References

This article was originally published by GIZ HERA. It is basically based on experiences, lessons learned and information gathered by GIZ cook stove projects. You can find more information about the authors and experts of the original “Cooking Energy Compendium” in the Imprint.

--> Back to Overview Cooking Energy Compendium