Click here to register!
Difference between revisions of "Solar Module Mounting"
***** (***** | *****) m |
***** (***** | *****) m |
||
| Line 1: | Line 1: | ||
[[Solar Cells and Modules|Solar modules]] have to be mounted in a stable and lasting manner to withstand adverse weather conditions such as wind, rain and hail. | [[Solar Cells and Modules|Solar modules]] have to be mounted in a stable and lasting manner to withstand adverse weather conditions such as wind, rain and hail. | ||
| − | Usually in a [[Photovoltaics|photovoltaic]] system solar modules are linked together, | + | Usually in a [[Photovoltaics|photovoltaic]] system solar modules are linked together, composing a photovoltaic array. Only in small systems, that need to satisfy a low [[Energy|energy]] demand, a photovoltaic array consists of a single module. |
| − | Arrays | + | <br> |
| + | |||
| + | = Mounting Structure Types = | ||
| + | |||
| + | Arrays can be mounted in different ways, for example: | ||
*on a pole, | *on a pole, | ||
| Line 10: | Line 14: | ||
*integrated into a building. | *integrated into a building. | ||
| − | The decision | + | The decision for a certain mounting structure depends on the site and its access to unobstructed sunlight and the lenght of the [[Wiring and Fitting|wires]] to the [[Batteries|batteries]]. |
The least costly option are fixed mounting structures. These structures tilt the modules at a fixed angle determined by the latitude of the site, the requirements of the [[Lamps and Electric Appliances|load]] (appliances which are powered by the PV power system) and the availability of sunlight. | The least costly option are fixed mounting structures. These structures tilt the modules at a fixed angle determined by the latitude of the site, the requirements of the [[Lamps and Electric Appliances|load]] (appliances which are powered by the PV power system) and the availability of sunlight. | ||
| − | Tracking structures are more expensive and require higher maintenance efforts. The trackers orient the modules towards the Sun, thus | + | Tracking structures are more expensive and require higher maintenance efforts. The trackers orient the modules towards the Sun, thus increasing their output. |
| + | |||
| + | Modules that are mounted '''on a pole''' are easy to install an can be easily oriented towards the Sun. They can be free-standing or installed on the side of a building. Usually, a small array of one or to modules is mounted per pole. Thus, pole mounting is suitable for small [[Solar Home Systems|solar home systems]], especially, if the roof support structure of the house is not stable enough to support a PV array. | ||
| − | + | For '''roof mounting '''the most common support structure consists of racks. It is important to leave a space of at least 10 cm between the roof and the array to allow ventilation. Otherwise, the array gets too hot and the performance of the modules decreases. The mounting structure must be fixed to the building or the under-roof beams to ensure durability and safety. | |
| − | + | '''Free-standing '''arrays on a ground support, usually consisting of racks, are easy to install and to orient towards the Sun. It might be difficult to avoid shading and therefore, enough space is needed to install the array far from trees, buildings and other objects that might cast shadows on it. The modules are easily accessible which is beneficial for maintenance, but could also imply a higher risk of theft. | |
| − | ''' | + | '''Building-integrated''' PV arrays consist of thin film modules. This kind of mounting structure is not common in off-grid installations. |
| + | |||
| + | <br> | ||
| − | + | = Mounting Structure Materials = | |
Mounting structures can be made of: | Mounting structures can be made of: | ||
| Line 31: | Line 39: | ||
*wood | *wood | ||
| − | There is a vary large | + | There is a vary large offer of factory-made mounting structures available on the market, but it is usually possible to produce them locally, too. |
<br> | <br> | ||
| − | For | + | For further information on mounting structures for [[Solar_Home_Systems|solar home systems]] see the EnDev wiki page on [[Standards for the Module Support Structure|standards for the module support structure]]. |
<br> | <br> | ||
| Line 41: | Line 49: | ||
<br> | <br> | ||
| − | + | [[Solar Main Page|⇒ Back to Solar Section]] | |
[[Category:Solar]] | [[Category:Solar]] | ||
Revision as of 09:22, 18 August 2009
Solar modules have to be mounted in a stable and lasting manner to withstand adverse weather conditions such as wind, rain and hail.
Usually in a photovoltaic system solar modules are linked together, composing a photovoltaic array. Only in small systems, that need to satisfy a low energy demand, a photovoltaic array consists of a single module.
Mounting Structure Types
Arrays can be mounted in different ways, for example:
- on a pole,
- a roof,
- free-standing on a ground support or
- integrated into a building.
The decision for a certain mounting structure depends on the site and its access to unobstructed sunlight and the lenght of the wires to the batteries.
The least costly option are fixed mounting structures. These structures tilt the modules at a fixed angle determined by the latitude of the site, the requirements of the load (appliances which are powered by the PV power system) and the availability of sunlight.
Tracking structures are more expensive and require higher maintenance efforts. The trackers orient the modules towards the Sun, thus increasing their output.
Modules that are mounted on a pole are easy to install an can be easily oriented towards the Sun. They can be free-standing or installed on the side of a building. Usually, a small array of one or to modules is mounted per pole. Thus, pole mounting is suitable for small solar home systems, especially, if the roof support structure of the house is not stable enough to support a PV array.
For roof mounting the most common support structure consists of racks. It is important to leave a space of at least 10 cm between the roof and the array to allow ventilation. Otherwise, the array gets too hot and the performance of the modules decreases. The mounting structure must be fixed to the building or the under-roof beams to ensure durability and safety.
Free-standing arrays on a ground support, usually consisting of racks, are easy to install and to orient towards the Sun. It might be difficult to avoid shading and therefore, enough space is needed to install the array far from trees, buildings and other objects that might cast shadows on it. The modules are easily accessible which is beneficial for maintenance, but could also imply a higher risk of theft.
Building-integrated PV arrays consist of thin film modules. This kind of mounting structure is not common in off-grid installations.
Mounting Structure Materials
Mounting structures can be made of:
- galvanised steel
- painted steel
- aluminium or
- wood
There is a vary large offer of factory-made mounting structures available on the market, but it is usually possible to produce them locally, too.
For further information on mounting structures for solar home systems see the EnDev wiki page on standards for the module support structure.
⇒ Back to Solar Section
