Difference between revisions of "Solar Water Heater"

From energypedia
***** (***** | *****)
***** (***** | *****)
m
 
(47 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
= Overview<br/> =
 
= Overview<br/> =
  
Obtaining hot water is energy intensive. In developing countries, households often spend a large portion of their energy budget on heating water. Solar thermal water heaters are a sustainable solution for poor households as they allow the barrier of high upfront costs to be overcome.[<ref name="Ashok Gadgil et al., ‘Domestic Solar Water Heater for Developing Countries’, Http://Energy. Lbl. Gov/Staff/Gadgil/Docs/2007/Solar-Water-Heater-Rpt. Pdf. Accessed on 6, no. 04 (2007): 2013.">Ashok Gadgil et al., ‘Domestic Solar Water Heater for Developing Countries’, Http://Energy. Lbl. Gov/Staff/Gadgil/Docs/2007/Solar-Water-Heater-Rpt. Pdf. Accessed on 6, no. 04 (2007): 2013.</ref><br/>
+
[[File:GIZ EnDev bolivia Bolivien Solarthermie.JPG|thumb|right|300px|A SWH with a water tank in Bolivia. (Picture: GIZ Energising Development Bolivia)]]
 +
 
 +
Obtaining hot water is energy intensive. In developing countries, households often spend a large portion of their energy budget on heating water. Solar thermal water heaters are a sustainable solution for poor households as they allow the barrier of high upfront costs to be overcome.<ref name="Ashok Gadgil et al., ‘Domestic Solar Water Heater for Developing Countries’, Http://Energy. Lbl. Gov/Staff/Gadgil/Docs/2007/Solar-Water-Heater-Rpt. Pdf. Accessed on 6, no. 04 (2007): 2013.">Ashok Gadgil et al., ‘Domestic Solar Water Heater for Developing Countries’, Http://Energy. Lbl. Gov/Staff/Gadgil/Docs/2007/Solar-Water-Heater-Rpt. Pdf. Accessed on 6, no. 04 (2007): 2013.</ref><br/>
  
 
The technology of solar thermal water heaters is present worldwide and significant deployments are already occurring in emerging economies and developing countries. Regions that do not experience freezing temperatures can use the simplest and most cost-effective kinds of this technology.<ref name="David Elizinga et al., ‘ADVANTAGE ENERGY Emerging Economies, Developing Countries and the Private-Public Sector Interface’ (Internationale Energy Agency, 2011), http://www.iea.org/publications/freepublications/publication/advantage_energy.pdf.">David Elizinga et al., ‘ADVANTAGE ENERGY Emerging Economies, Developing Countries and the Private-Public Sector Interface’ (Internationale Energy Agency, 2011), http://www.iea.org/publications/freepublications/publication/advantage_energy.pdf.</ref> In fact, more than 90% of systems worldwide are based on the thermosiphon principle (for a definition see below regarding passive systems).<ref name="Amy Punter, ‘Solar Thermal Energy Application Heating,cooling, Crop Drying - Practical Answers’, 2007, http://answers.practicalaction.org/our-resources/item/solar-thermal-energy.">Amy Punter, ‘Solar Thermal Energy Application Heating,cooling, Crop Drying - Practical Answers’, 2007, http://answers.practicalaction.org/our-resources/item/solar-thermal-energy.</ref><br/>
 
The technology of solar thermal water heaters is present worldwide and significant deployments are already occurring in emerging economies and developing countries. Regions that do not experience freezing temperatures can use the simplest and most cost-effective kinds of this technology.<ref name="David Elizinga et al., ‘ADVANTAGE ENERGY Emerging Economies, Developing Countries and the Private-Public Sector Interface’ (Internationale Energy Agency, 2011), http://www.iea.org/publications/freepublications/publication/advantage_energy.pdf.">David Elizinga et al., ‘ADVANTAGE ENERGY Emerging Economies, Developing Countries and the Private-Public Sector Interface’ (Internationale Energy Agency, 2011), http://www.iea.org/publications/freepublications/publication/advantage_energy.pdf.</ref> In fact, more than 90% of systems worldwide are based on the thermosiphon principle (for a definition see below regarding passive systems).<ref name="Amy Punter, ‘Solar Thermal Energy Application Heating,cooling, Crop Drying - Practical Answers’, 2007, http://answers.practicalaction.org/our-resources/item/solar-thermal-energy.">Amy Punter, ‘Solar Thermal Energy Application Heating,cooling, Crop Drying - Practical Answers’, 2007, http://answers.practicalaction.org/our-resources/item/solar-thermal-energy.</ref><br/>
  
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
+
<br/>
|-
 
| A SWH with a water tank in Bolivia. (Picture: GIZ Energising Development Bolivia)<br/>
 
| [[File:GIZ EnDev bolivia Bolivien Solarthermie.JPG|border|right|500px|alt=GIZ EnDev bolivia Bolivien Solarthermie.JPG]]<br/>
 
|}
 
  
 
= The Technology<br/> =
 
= The Technology<br/> =
Line 21: Line 19:
  
 
State of the art solar water heaters incorporate features such as: selective surface absorbers, anti-reflective glazing, well-designed collector arrays, and efficient storage systems thereby achieving operation efficiencies of the order of 35 to 40%. Even the simplest types allow households to have convenient access to hot water.<ref name="Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref>.<br/>
 
State of the art solar water heaters incorporate features such as: selective surface absorbers, anti-reflective glazing, well-designed collector arrays, and efficient storage systems thereby achieving operation efficiencies of the order of 35 to 40%. Even the simplest types allow households to have convenient access to hot water.<ref name="Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref>.<br/>
 +
 +
<br/>[[#toc|►Go to Top]]
  
 
== Active vs. Passive Systems<br/> ==
 
== Active vs. Passive Systems<br/> ==
  
 
SWH can be either active system or pasive systems:<br/>
 
SWH can be either active system or pasive systems:<br/>
 
+
<div style="clear: both"></div>
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
+
[[File:SWH active system.png|thumb|right|300px|Active system: collector, tank, pipe and controller]]
|-
 
| Active system: collector, tank, pipe and controller<ref name="https://en.wikipedia.org/wiki/File:DirectSolarSystems.jpg"> https://en.wikipedia.org/wiki/File:DirectSolarSystems.jpg</ref><br/>
 
| [[File:SWH active system.png|border|right|400px|alt=SWH active system.png]]<br/>
 
|}
 
  
 
*'''Active systems''' use either pumps to circulate water or a heat transfer fluid which utilizes electrical components (e.g. a controller). There are two types of active solar water-heating systems:<br/>
 
*'''Active systems''' use either pumps to circulate water or a heat transfer fluid which utilizes electrical components (e.g. a controller). There are two types of active solar water-heating systems:<br/>
  
 
#'''Direct-circulation systems&nbsp;'''use pumps to circulate pressurized potable water directly through the collectors. These systems are appropriate in areas that do not freeze for long periods and do not have hard or acidic water.<br/>
 
#'''Direct-circulation systems&nbsp;'''use pumps to circulate pressurized potable water directly through the collectors. These systems are appropriate in areas that do not freeze for long periods and do not have hard or acidic water.<br/>
#'''Indirect-circulation systems''' pump heat-transfer fluids through collectors. Heat exchangers transfer the heat from the fluid to the potable water. Some indirect systems have "overheat protection" which is a method of protecting the collector and the glycol fluid from becoming super-heated when the load is low and the intensity of incoming solar radiation is high.<br/>
+
#'''Indirect-circulation systems''' pump heat-transfer fluids through collectors. Heat exchangers transfer the heat from the fluid to the potable water. Some indirect systems have "overheat protection" which is a method of protecting the collector and the glycol fluid from becoming super-heated when the load is low and the intensity of incoming solar radiation is high.
  
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
+
<br/>
|-
+
<div style="clear: both"></div>
| Passive system: collector and tank<ref name="https://en.wikipedia.org/wiki/File:DirectSolarSystems.jpg"> https://en.wikipedia.org/wiki/File:DirectSolarSystems.jpg</ref><br/>
+
<br/>[[File:SWH passive system.png|thumb|right|300px|Passive system: collector and tank]]
| [[File:SWH passive system.png|border|right|400px|alt=SWH passive system.png]]<br/>
 
|}
 
  
 
*'''Passive systems''' transfer and circulate heat naturally. Passive solar water heaters rely on gravity and the tendency for water to naturally circulate as it is heated. Because they contain no electrical components, passive systems are generally more reliable, easier to maintain, and possibly have a longer work-life than active systems. The two common types of passive systems are described below:<br/>
 
*'''Passive systems''' transfer and circulate heat naturally. Passive solar water heaters rely on gravity and the tendency for water to naturally circulate as it is heated. Because they contain no electrical components, passive systems are generally more reliable, easier to maintain, and possibly have a longer work-life than active systems. The two common types of passive systems are described below:<br/>
  
 
#'''Integral-collector storage systems''' or batch systems consist of a tank that is directly heated by sunlight. These are the oldest and simplest solar water heater designs and are good for households with significant daytime and evening hot-water needs. However, they do not work well in households with predominantly morning usage because they lose most of the collected energy overnight. These solar collectors are suited for areas where temperatures rarely go below freezing.<br/>
 
#'''Integral-collector storage systems''' or batch systems consist of a tank that is directly heated by sunlight. These are the oldest and simplest solar water heater designs and are good for households with significant daytime and evening hot-water needs. However, they do not work well in households with predominantly morning usage because they lose most of the collected energy overnight. These solar collectors are suited for areas where temperatures rarely go below freezing.<br/>
#'''Thermosyphon systems''' are an economical and reliable choice. These systems rely on the natural convection of warm water rising to circulate water through the collectors and to a storage tank located above the collector. As water in the solar collector heats, it becomes lighter and rises naturally into the tank above. Meanwhile, the cooler water flows down the pipes to the bottom of the collector, thereby enhancing the circulation. Indirect Thermosiphon systems use a glycol fluid in the collector loop as a heating medium.<ref name="UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf">UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf </ref><br/>
+
#'''Thermosyphon systems''' are an economical and reliable choice. These systems rely on the natural convection of warm water rising to circulate water through the collectors and to a storage tank located above the collector. As water in the solar collector heats, it becomes lighter and rises naturally into the tank above. Meanwhile, the cooler water flows down the pipes to the bottom of the collector, thereby enhancing the circulation. Indirect Thermosiphon systems use a glycol fluid in the collector loop as a heating medium.<ref name="UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf">UNEP (2015): [http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries]  </ref><br/>
  
 
'''Most solar thermal systems installed in developing countries are thermosiphon systems.'''<br/>
 
'''Most solar thermal systems installed in developing countries are thermosiphon systems.'''<br/>
 +
 +
<br/>[[#toc|►Go to Top]]
 +
 +
<br/>
  
 
== Collectors<br/> ==
 
== Collectors<br/> ==
 +
 +
Flat plate as well as evacuated tube collectors are both used for thermosiphon systems.<ref name="Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.">Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.</ref>
 +
 +
<br/>
  
 
=== Flat Plate Collector<br/> ===
 
=== Flat Plate Collector<br/> ===
Line 72: Line 74:
  
 
At night it is possible for the collector to lose heat by radiation resulting in the circulation being reversed and the water cooling. This can be overcome by use of a suitable non-return valve. However, there is a danger with solar collectors when used under clear night conditions (e.g. in arid and semi-arid regions) that they can actually freeze even when the ambient temperature is above freezing point. In such conditions it may be necessary to have a primary circuit through the collector filled with antifreeze and a separate indirect hot water cylinder where the water from the collector passes through a copper coil to heat the main water supply. This problem will only apply in certain desert regions during the cold season or at high altitudes in the tropics and sub-tropics.<br/>
 
At night it is possible for the collector to lose heat by radiation resulting in the circulation being reversed and the water cooling. This can be overcome by use of a suitable non-return valve. However, there is a danger with solar collectors when used under clear night conditions (e.g. in arid and semi-arid regions) that they can actually freeze even when the ambient temperature is above freezing point. In such conditions it may be necessary to have a primary circuit through the collector filled with antifreeze and a separate indirect hot water cylinder where the water from the collector passes through a copper coil to heat the main water supply. This problem will only apply in certain desert regions during the cold season or at high altitudes in the tropics and sub-tropics.<br/>
 +
 +
<br/>[[#toc|►Go to Top]]
  
 
=== Evacuated Tube Collector<br/> ===
 
=== Evacuated Tube Collector<br/> ===
  
Evacuated-tube solar collectors tend to be more efficient but also more expensive. They are used more frequently for commercial applications in the U.S.A. A collector is made up of several pipes in parallel rows that are connected at the top. The tubes consist of a vacuum with a pipe running through the middle containing the working fluid. The water moves up and down and along through the series of pipes to exit the system at a significantly higher temperature. The heat loss is significantly reduced thanks to high negative pressure in the glass tubes. They can be deployed nearly horizontally on flat roofs.<ref name="Ray Holland, ‘Solar Water Heaters: Hot Water for Washing and Heating - Practical Answers’, 1988, http://answers.practicalaction.org/our-resources/item/solar-water-heating.">Ray Holland, ‘Solar Water Heaters: Hot Water for Washing and Heating - Practical Answers’, 1988, http://answers.practicalaction.org/our-resources/item/solar-water-heating.</ref><ref name="Deutsche Energie-Agentur GmbH (dena), ‘Solar Thermal Energy Technologies and Applications’, 17 December 2014, http://www.renewables-made-in-germany.com/en/renewables-made-in-germany/technologies/solar-thermal-energy/solar-thermal-energy/technologies-and-applications.html.">Deutsche Energie-Agentur GmbH (dena), ‘Solar Thermal Energy Technologies and Applications’, 17 December 2014, http://www.renewables-made-in-germany.com/en/renewables-made-in-germany/technologies/solar-thermal-energy/solar-thermal-energy/technologies-and-applications.html.</ref><br/><!--[if gte mso 9]><xml><o:OfficeDocumentSettings>
+
Evacuated-tube solar collectors tend to be more efficient but also more expensive. They are used more frequently for commercial applications in the U.S.A. A collector is made up of several pipes in parallel rows that are connected at the top. The tubes consist of a vacuum with a pipe running through the middle containing the working fluid. The water moves up and down and along through the series of pipes to exit the system at a significantly higher temperature. The heat loss is significantly reduced thanks to high negative pressure in the glass tubes. They can be deployed nearly horizontally on flat roofs.<ref name="Ray Holland, ‘Solar Water Heaters: Hot Water for Washing and Heating - Practical Answers’, 1988, http://answers.practicalaction.org/our-resources/item/solar-water-heating.">Ray Holland, ‘Solar Water Heaters: Hot Water for Washing and Heating - Practical Answers’, 1988, http://answers.practicalaction.org/our-resources/item/solar-water-heating.</ref><ref name="Deutsche Energie-Agentur GmbH (dena), ‘Solar Thermal Energy Technologies and Applications’, 17 December 2014, http://www.renewables-made-in-germany.com/en/renewables-made-in-germany/technologies/solar-thermal-energy/solar-thermal-energy/technologies-and-applications.html.">Deutsche Energie-Agentur GmbH (dena), ‘Solar Thermal Energy Technologies and Applications’, 17 December 2014, http://www.renewables-made-in-germany.com/en/renewables-made-in-germany/technologies/solar-thermal-energy/solar-thermal-energy/technologies-and-applications.html.</ref><br/>
  <o:AllowPNG/>
+
 
</o:OfficeDocumentSettings></xml><![endif]-->
+
<br/>[[#toc|►Go to Top]]
 +
 
 +
<br/>
  
 
== Installation and Maintenance<br/> ==
 
== Installation and Maintenance<br/> ==
Line 85: Line 91:
 
The following data is required to design, size and select a solar water heating system:: daily hot water requirement (litres/day), average insolation (kWh/m2 day), water quality and storage requirements<ref name="Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref>.<br/>
 
The following data is required to design, size and select a solar water heating system:: daily hot water requirement (litres/day), average insolation (kWh/m2 day), water quality and storage requirements<ref name="Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref>.<br/>
  
Find more technical details on SWH: [http://www.geni.org/globalenergy/research/solar-water-heaters/solar-water-heater.pdf http://www.geni.org/globalenergy/research/solar-water-heaters/solar-water-heater.pdf]
+
Find more technical details on SWH: [http://www.geni.org/globalenergy/research/solar-water-heaters/solar-water-heater.pdf GENI: Solar Water Heaters]
  
 
Solar thermal systems are '''relatively maintenance free''' and only require &nbsp;an &nbsp;inspection of the piping for leaks and the cleaning of the collectors on an occasional basis. In some regions, it may also be necessary to inspect the transfer fluid for freeze protection and to remove the build-up of lime scale that chokes the collector and tank recirculating pipes over time.<br/>
 
Solar thermal systems are '''relatively maintenance free''' and only require &nbsp;an &nbsp;inspection of the piping for leaks and the cleaning of the collectors on an occasional basis. In some regions, it may also be necessary to inspect the transfer fluid for freeze protection and to remove the build-up of lime scale that chokes the collector and tank recirculating pipes over time.<br/>
  
<br/>
+
<br/>[[#toc|►Go to Top]];
  
 
= Advantages and Disadvantages of Thermosiphon SWH<br/> =
 
= Advantages and Disadvantages of Thermosiphon SWH<br/> =
 
<br/>
 
  
 
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
 
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
Line 138: Line 142:
  
 
[[File:GIZ Brinkmann Peru SWH Themosyphon.JPG|left|500px|alt=GIZ Brinkmann Peru SWH Themosyphon.JPG]]
 
[[File:GIZ Brinkmann Peru SWH Themosyphon.JPG|left|500px|alt=GIZ Brinkmann Peru SWH Themosyphon.JPG]]
 +
<br/><div style="clear: both"></div>
 +
<br/>[[#toc|►Go to Top]]
  
 
<br/>
 
<br/>
Line 156: Line 162:
 
SWH are very efficient, and can reduce either the electricity needs or reduce the costs for heating water by nearly 75% annually.<ref name="Jean Cariou and Peter Meisen, ‘Solar Water Heater’, Global Energy Network Institute, 2010, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/solar-water-heater.pdf.">Jean Cariou and Peter Meisen, ‘Solar Water Heater’, Global Energy Network Institute, 2010, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/solar-water-heater.pdf.</ref>
 
SWH are very efficient, and can reduce either the electricity needs or reduce the costs for heating water by nearly 75% annually.<ref name="Jean Cariou and Peter Meisen, ‘Solar Water Heater’, Global Energy Network Institute, 2010, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/solar-water-heater.pdf.">Jean Cariou and Peter Meisen, ‘Solar Water Heater’, Global Energy Network Institute, 2010, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/solar-water-heater.pdf.</ref>
  
Initial costs for a solar thermal system vary among countries and depend on the quality of the solar collector, the labour costs of installation, and also on the climate conditions in which the solar thermal systems works. Initial costs depend on the level of governmental support for SWH as well as the development of local industries. Quality of the solar collector: Lower quality products are assumed to have a life expectancy of only half of higher quality products.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf.</ref><br/>
+
Initial costs for a solar thermal system vary among countries and depend on the quality of the solar collector, the labour costs of installation, and also on the climate conditions in which the solar thermal systems works. Initial costs depend on the level of governmental support for SWH as well as the development of local industries. Quality of the solar collector: Lower quality products are assumed to have a life expectancy of only half of higher quality products.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl.</ref><br/>
 +
 
 +
See details for different system sizes within the chapter about households, social institutions and productive use.<br/>
  
See details for different system sizes within the chapter about households, social institutions and productive use.<br/><!--[if gte mso 9]><xml><o:OfficeDocumentSettings>
+
<br/>[[#toc|►Go to Top]]
  <o:AllowPNG/>
 
</o:OfficeDocumentSettings></xml><![endif]--><br/>
 
  
 
<br/>
 
<br/>
Line 172: Line 178:
 
The current commercial market for SWH is predominantly: households (mostly high income), hospitals, commercial establishments and tourist facilities. Therefore, this article distinguishes between Solar Water Heating for household uses, for: social institutions, like schools or hospitals and for productive uses in commercial enterprises.
 
The current commercial market for SWH is predominantly: households (mostly high income), hospitals, commercial establishments and tourist facilities. Therefore, this article distinguishes between Solar Water Heating for household uses, for: social institutions, like schools or hospitals and for productive uses in commercial enterprises.
  
&nbsp;
+
<br/>[[#toc|►Go to Top]]
  
 
== SWH for Households<br/> ==
 
== SWH for Households<br/> ==
  
Household interests differ depending on their demand, the availability of different system sizes and what they can afford to pay. Relevant questions are, for example, how big must the system be for a family? How many liters of water can usually be heated? How much are the initial costs? What are the alterative costs for biomass heating or other options? What is the payback time for the SWH?
+
Household interests differ depending on their demand, the availability of different system sizes and what they can afford to pay. Relevant questions are, for example, how big must the system be for a family? How many liters of water can usually be heated? How much are the initial costs? What are the alterative costs for biomass heating or other options? What is the payback time for the SWH?<br/>
 +
 
 +
The system size depends on the number of family members and on the climate: In hotter climates, thermosiphon SWH have often only a smaller collector area of around 2-4 m² and a 100-300 litre storage tank. In China, for example, thermosiphon SWH with an evacuated tube collector of around 2 m² have a hot water storage tank of around 120-200 litres.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref> In Ghana,&nbsp;a family (of 4 people) will demand 200l of hot water daily, assuming an average hot water demand of 50l per day.<ref name="http://www.iea-shc.org/country-report-ghana">http://www.iea-shc.org/country-report-ghana</ref>&nbsp;<br/>
  
The system size depends on the number of family members and on the climate: In hotter climates, thermosiphon SWH have often only a smaller collector area of around 2-4 m² and a 100-300 litre storage tank. In China, for example, thermosiphon SWH with an evacuated tube collector of around 2 m² have a hot water storage tank of around 120-200 litres.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref> A 300-liter system is typically suited for family of 4-6 persons and will provide up to 1000 kWh of electricity annually.<ref name="GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref><br/>
+
The thermosiphon SWH for households usually have a collector area in the range between 2 m² (Israel) and 4 m² (India, South Africa, Turkey) and a corresponding hot water storage tank between 150 L and 400 L. SWH systems last between 10 and 15 years.<ref name="Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.">Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.</ref> A 300-liter system is typically suited for family of 4-6 persons and will provide up to 1000 kWh of electricity annually.<ref name="GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref><br/>
  
 
Costs for SWH largely vary among countries: usually prices for SHW are between USD 250-2,500/kW. However, in some developing countries prices could be less than half of this. The figure below shows that the costs for a SWH do not only depend on the type of SWH (blue dots: flat plate collector, red dots: evacuated tube collector, or green dots: active system with a pump) or the collector area, but also on the costs for specific applications of each system (e.g. different materials for tanks, insulation, piping) or other characteristics like warranty (e.g., 5 or 10 years).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref><br/>
 
Costs for SWH largely vary among countries: usually prices for SHW are between USD 250-2,500/kW. However, in some developing countries prices could be less than half of this. The figure below shows that the costs for a SWH do not only depend on the type of SWH (blue dots: flat plate collector, red dots: evacuated tube collector, or green dots: active system with a pump) or the collector area, but also on the costs for specific applications of each system (e.g. different materials for tanks, insulation, piping) or other characteristics like warranty (e.g., 5 or 10 years).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref><br/>
Line 184: Line 192:
 
'''Figure: Prices for final customers for internationally traded thermosiphon systems (2014).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref>'''<br/>
 
'''Figure: Prices for final customers for internationally traded thermosiphon systems (2014).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref>'''<br/>
  
[[File:SWH costs IRENA.png|border|left|800px|alt=SWH costs IRENA.png]]<br/>
+
[[File:SWH costs IRENA.png|border|left|600px|alt=SWH costs IRENA.png]]<br/>
 
<div style="clear: both"></div>
 
<div style="clear: both"></div>
Most solar thermal systems have a relatively high up-front cost of between USD 2,000 and 4,500 to install. However, this price is often cost competitive when the total energy expenses are averaged over the entire lifetime of the systems (e.g. compared to electricity-based (generators) or biomass heated water).<ref name="US Department of Energy, ‘A Consumer’s Guide HeatYourWaterwiththeSun’, 2003, http://solarteknologies.com/pdfs/brochures/water_heat_guide.pdf.">US Department of Energy, ‘A Consumer’s Guide HeatYourWaterwiththeSun’, 2003, http://solarteknologies.com/pdfs/brochures/water_heat_guide.pdf.</ref><br/>
+
The levelized costs of solar thermal generated heat for thermosiphon hot water systems are between 2.1 €-ct/kWh (e.g. in Turkey) and 11.6 €-ct/kWh (Australia).<ref name="Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.">Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.</ref> Most solar thermal systems have a relatively high up-front cost of between USD 2,000 and 4,500. However, this price is often cost competitive when the total energy expenses are averaged over the entire lifetime of the systems (e.g. compared to electricity-based (generators) or biomass heated water).<ref name="US Department of Energy, ‘A Consumer’s Guide HeatYourWaterwiththeSun’, 2003, http://solarteknologies.com/pdfs/brochures/water_heat_guide.pdf.">US Department of Energy, ‘A Consumer’s Guide HeatYourWaterwiththeSun’, 2003, http://solarteknologies.com/pdfs/brochures/water_heat_guide.pdf.</ref><br/>
  
 
In China, initial investment costs for a direct thermosiphon systems for households with average collector size of 4 m² (2.8 kW th ) range from 100 to 250 USD/kW th (90 to 225 EUR/kW th ) with an energy cost ranging from 2 to 5 USD cents/kWh th (1.8 to 4.5 EUR cents/kWh th ). In the Mediterranean region, the average cost for a open-loop, pressure-less thermosiphon systems (180 litre hot water, 70 litre feeding tank) is around 920 USD (830 EUR).<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><br/>
 
In China, initial investment costs for a direct thermosiphon systems for households with average collector size of 4 m² (2.8 kW th ) range from 100 to 250 USD/kW th (90 to 225 EUR/kW th ) with an energy cost ranging from 2 to 5 USD cents/kWh th (1.8 to 4.5 EUR cents/kWh th ). In the Mediterranean region, the average cost for a open-loop, pressure-less thermosiphon systems (180 litre hot water, 70 litre feeding tank) is around 920 USD (830 EUR).<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><br/>
Line 194: Line 202:
 
It was found that switching from electrical to solar water heating systems would lead to yearly energy savings of approximately 930kWh within a local Native American community of California. Using the SWH for showering and other daily hot water uses, the payback period is only 7 years.<ref name="Ashok Gadgil et al., ‘Solar Water Heater Project’, 2009, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/swh-rpt-2009.pdf.">Ashok Gadgil et al., ‘Solar Water Heater Project’, 2009, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/swh-rpt-2009.pdf.</ref>
 
It was found that switching from electrical to solar water heating systems would lead to yearly energy savings of approximately 930kWh within a local Native American community of California. Using the SWH for showering and other daily hot water uses, the payback period is only 7 years.<ref name="Ashok Gadgil et al., ‘Solar Water Heater Project’, 2009, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/swh-rpt-2009.pdf.">Ashok Gadgil et al., ‘Solar Water Heater Project’, 2009, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/swh-rpt-2009.pdf.</ref>
  
Low temperature flat-plate solar collectors typically cost 21 US $ per square metre (0,0021 US $ /cm²). Medium to high temperature collectors generally cost approximately 200 US $ per square metre. Flat plate collectors are sized at approximately 0,1 square metre (929 cm²) per gallon (3,79 l ) of daily hot water use or 245 cm² per l of hot water. A complete system installed costs approximately 14 US $/l or 2000 US $ per 150 l.<ref name="Source?">Source?</ref><br/><!--[if gte mso 9]><xml><w:WordDocument>
+
Low temperature flat-plate solar collectors typically cost 21 US $ per square metre (0,0021 US $ /cm²). Medium to high temperature collectors generally cost approximately 200 US $ per square metre. Flat plate collectors are sized at approximately 0,1 square metre (929 cm²) per gallon (3,79 l ) of daily hot water use or 245 cm² per l of hot water. A complete system installed costs approximately 14 US $/l or 2000 US $ per 150 l.<ref name="Source?">Source?</ref><br/>
  <w:View>Normal</w:View>
+
 
  <w:Zoom>0</w:Zoom>
+
'''Table: Costs of SWH in a selection of countries according to the IEA SHC programme'''<ref name="http://www.iea-shc.org">http://www.iea-shc.org</ref>
  <w:TrackMoves/>
+
 
  <w:TrackFormatting/>
+
{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
  <w:PunctuationKerning/>
+
|-
  <w:ValidateAgainstSchemas/>
+
! scope="col" | Country<br/>
  <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>
+
! scope="col" | Costs
  <w:IgnoreMixedContent>false</w:IgnoreMixedContent>
+
|-
  <w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
+
| Burkina Faso<br/>
  <w:DoNotPromoteQF/>
+
| 0,7 m2 with 56L: 100,000 FCFA (152 EUR)<br/>1,4 m2 with 100L: 225,000 FCFA (343 EUR)<br/>2m2 with 100L: 525,000 FCFA (800 EUR)<br/>6m2 with 300L: 1,100,000 FCFA (1,600 EUR)
  <w:LidThemeOther>EN-GB</w:LidThemeOther>
+
|-
  <w:LidThemeAsian>X-NONE</w:LidThemeAsian>
+
| Capo Verde<br/>
  <w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript>
+
|
  <w:Compatibility>
+
Price found in the market is around 700 € to 850 € per square meter, all included (storage tank, pipes, valves, installation, etc.). The most common type of imported solar collector is the indirect thermosiphon system of flat plate ranging from 150 litres to 300 litres; normally the 150 litres units have 2 m2 of area. Direct type collector of 160 litres capacity is also imported.
  <w:BreakWrappedTables/>
+
 
  <w:SnapToGridInCell/>
+
|-
  <w:WrapTextWithPunct/>
+
| Ghana<br/>
  <w:UseAsianBreakRules/>
+
|
  <w:DontGrowAutofit/>
+
The cost of solar water heating systems and components in Ghana varies depending on the country of origin and the company that manufactured it.
  <w:SplitPgBreakAndParaMark/>
+
 
  <w:EnableOpenTypeKerning/>
+
*Flat plate thermosyphon: 4050 GH (888€)
  <w:DontFlipMirrorIndents/>
+
*Evacuated tube pumped system: 6600 GH (1400€)
  <w:OverrideTableStyleHps/>
+
 
  </w:Compatibility>
+
|-
  <m:mathPr>
+
| Nigeria<br/>
  <m:mathFont m:val="Cambria Math"/>
+
| A typical 150 litre system with evacuated tubes cost about N100,000 (€444) with an installation cost of about N30,000 (€133).
  <m:brkBin m:val="before"/>
+
|-
  <m:brkBinSub m:val="&#45;-"/>
+
| Senegal<br/>
  <m:smallFrac m:val="off"/>
+
|
  <m:dispDef/>
+
Costs range from FCFA 350,000 (~ 540 €) to 1,250,000 CFA (~ 1920 €) depending on the type of SWH. The connection cost ranges from 75,000 CFA (~ € 115) to 125,000 CFA francs (~ 190 €).
  <m:lMargin m:val="0"/>
+
 
  <m:rMargin m:val="0"/>
+
|}
  <m:defJc m:val="centerGroup"/>
+
 
  <m:wrapIndent m:val="1440"/>
+
[[#toc|►Go to Top]]<br/>
  <m:intLim m:val="subSup"/>
 
  <m:naryLim m:val="undOvr"/>
 
  </m:mathPr></w:WordDocument></xml><![endif]--> <!--[if gte mso 9]><xml><w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="false"
 
  DefSemiHidden="false" DefQFormat="false" DefPriority="99"
 
  LatentStyleCount="371">
 
  <w:LsdException Locked="false" Priority="0" QFormat="true" Name="Normal"/>
 
  <w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 1"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 2"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 3"/>
 
  <w:LsdException Locked="false" Priority="0" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 4"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 5"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 6"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 7"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 8"/>
 
  <w:LsdException Locked="false" Priority="9" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="heading 9"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 6"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 7"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 8"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index 9"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="toc 1"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="toc 2"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="toc 3"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 4"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 5"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 6"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 7"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 8"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="toc 9"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Normal Indent"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="footnote text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="annotation text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="header"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="footer"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="index heading"/>
 
  <w:LsdException Locked="false" Priority="35" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="caption"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="table of figures"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="envelope address"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="envelope return"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="footnote reference"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="annotation reference"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="line number"/>
 
  <w:LsdException Locked="false" Priority="0" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="page number"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="endnote reference"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="endnote text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="table of authorities"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="macro"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="toa heading"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Bullet"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Number"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Bullet 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Bullet 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Bullet 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Bullet 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Number 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Number 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Number 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Number 5"/>
 
  <w:LsdException Locked="false" Priority="10" QFormat="true" Name="Title"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Closing"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Signature"/>
 
  <w:LsdException Locked="false" Priority="1" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="Default Paragraph Font"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text Indent"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Continue"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Continue 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Continue 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Continue 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="List Continue 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Message Header"/>
 
  <w:LsdException Locked="false" Priority="11" QFormat="true" Name="Subtitle"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Salutation"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Date"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text First Indent"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text First Indent 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Note Heading"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text Indent 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Body Text Indent 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Block Text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Hyperlink"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="FollowedHyperlink"/>
 
  <w:LsdException Locked="false" Priority="22" QFormat="true" Name="Strong"/>
 
  <w:LsdException Locked="false" Priority="20" QFormat="true" Name="Emphasis"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Document Map"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Plain Text"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="E-mail Signature"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Top of Form"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Bottom of Form"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Normal (Web)"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Acronym"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Address"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Cite"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Code"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Definition"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Keyboard"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Preformatted"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Sample"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Typewriter"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="HTML Variable"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Normal Table"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="annotation subject"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="No List"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Outline List 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Outline List 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Outline List 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Simple 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Simple 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Simple 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Classic 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Classic 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Classic 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Classic 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Colorful 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Colorful 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Colorful 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Columns 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Columns 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Columns 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Columns 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Columns 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 6"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 7"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Grid 8"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 4"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 5"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 6"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 7"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table List 8"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table 3D effects 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table 3D effects 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table 3D effects 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Contemporary"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Elegant"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Professional"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Subtle 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Subtle 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Web 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Web 2"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Web 3"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Balloon Text"/>
 
  <w:LsdException Locked="false" Priority="39" Name="Table Grid"/>
 
  <w:LsdException Locked="false" SemiHidden="true" UnhideWhenUsed="true"
 
  Name="Table Theme"/>
 
  <w:LsdException Locked="false" SemiHidden="true" Name="Placeholder Text"/>
 
  <w:LsdException Locked="false" Priority="1" QFormat="true" Name="No Spacing"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 1"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 1"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 1"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 1"/>
 
  <w:LsdException Locked="false" SemiHidden="true" Name="Revision"/>
 
  <w:LsdException Locked="false" Priority="34" QFormat="true"
 
  Name="List Paragraph"/>
 
  <w:LsdException Locked="false" Priority="29" QFormat="true" Name="Quote"/>
 
  <w:LsdException Locked="false" Priority="30" QFormat="true"
 
  Name="Intense Quote"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 1"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 1"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 1"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 1"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 2"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 2"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 2"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 2"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 2"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 2"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 2"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 3"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 3"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 3"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 3"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 3"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 3"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 3"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 4"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 4"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 4"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 4"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 4"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 4"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 4"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 5"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 5"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 5"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 5"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 5"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 5"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 5"/>
 
  <w:LsdException Locked="false" Priority="60" Name="Light Shading Accent 6"/>
 
  <w:LsdException Locked="false" Priority="61" Name="Light List Accent 6"/>
 
  <w:LsdException Locked="false" Priority="62" Name="Light Grid Accent 6"/>
 
  <w:LsdException Locked="false" Priority="63" Name="Medium Shading 1 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="64" Name="Medium Shading 2 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="65" Name="Medium List 1 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="66" Name="Medium List 2 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="67" Name="Medium Grid 1 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="68" Name="Medium Grid 2 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="69" Name="Medium Grid 3 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="70" Name="Dark List Accent 6"/>
 
  <w:LsdException Locked="false" Priority="71" Name="Colorful Shading Accent 6"/>
 
  <w:LsdException Locked="false" Priority="72" Name="Colorful List Accent 6"/>
 
  <w:LsdException Locked="false" Priority="73" Name="Colorful Grid Accent 6"/>
 
  <w:LsdException Locked="false" Priority="19" QFormat="true"
 
  Name="Subtle Emphasis"/>
 
  <w:LsdException Locked="false" Priority="21" QFormat="true"
 
  Name="Intense Emphasis"/>
 
  <w:LsdException Locked="false" Priority="31" QFormat="true"
 
  Name="Subtle Reference"/>
 
  <w:LsdException Locked="false" Priority="32" QFormat="true"
 
  Name="Intense Reference"/>
 
  <w:LsdException Locked="false" Priority="33" QFormat="true" Name="Book Title"/>
 
  <w:LsdException Locked="false" Priority="37" SemiHidden="true"
 
  UnhideWhenUsed="true" Name="Bibliography"/>
 
  <w:LsdException Locked="false" Priority="39" SemiHidden="true"
 
  UnhideWhenUsed="true" QFormat="true" Name="TOC Heading"/>
 
  <w:LsdException Locked="false" Priority="41" Name="Plain Table 1"/>
 
  <w:LsdException Locked="false" Priority="42" Name="Plain Table 2"/>
 
  <w:LsdException Locked="false" Priority="43" Name="Plain Table 3"/>
 
  <w:LsdException Locked="false" Priority="44" Name="Plain Table 4"/>
 
  <w:LsdException Locked="false" Priority="45" Name="Plain Table 5"/>
 
  <w:LsdException Locked="false" Priority="40" Name="Grid Table Light"/>
 
  <w:LsdException Locked="false" Priority="46" Name="Grid Table 1 Light"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark"/>
 
  <w:LsdException Locked="false" Priority="51" Name="Grid Table 6 Colorful"/>
 
  <w:LsdException Locked="false" Priority="52" Name="Grid Table 7 Colorful"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 1"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 1"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 1"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 1"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 2"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 2"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 2"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 2"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 3"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 3"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 3"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 3"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 4"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 4"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 4"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 4"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 5"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 5"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 5"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 5"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="Grid Table 1 Light Accent 6"/>
 
  <w:LsdException Locked="false" Priority="47" Name="Grid Table 2 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="48" Name="Grid Table 3 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="49" Name="Grid Table 4 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="50" Name="Grid Table 5 Dark Accent 6"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="Grid Table 6 Colorful Accent 6"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="Grid Table 7 Colorful Accent 6"/>
 
  <w:LsdException Locked="false" Priority="46" Name="List Table 1 Light"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark"/>
 
  <w:LsdException Locked="false" Priority="51" Name="List Table 6 Colorful"/>
 
  <w:LsdException Locked="false" Priority="52" Name="List Table 7 Colorful"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 1"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 1"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 1"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 1"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 1"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 2"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 2"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 2"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 2"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 2"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 3"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 3"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 3"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 3"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 3"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 4"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 4"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 4"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 4"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 4"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 5"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 5"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 5"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 5"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 5"/>
 
  <w:LsdException Locked="false" Priority="46"
 
  Name="List Table 1 Light Accent 6"/>
 
  <w:LsdException Locked="false" Priority="47" Name="List Table 2 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="48" Name="List Table 3 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="49" Name="List Table 4 Accent 6"/>
 
  <w:LsdException Locked="false" Priority="50" Name="List Table 5 Dark Accent 6"/>
 
  <w:LsdException Locked="false" Priority="51"
 
  Name="List Table 6 Colorful Accent 6"/>
 
  <w:LsdException Locked="false" Priority="52"
 
  Name="List Table 7 Colorful Accent 6"/>
 
</w:LatentStyles></xml><![endif]--> <!--[if gte mso 10]><style>/* Style Definitions */
 
table.MsoNormalTable
 
{mso-style-name:"Normale Tabelle";
 
mso-tstyle-rowband-size:0;
 
mso-tstyle-colband-size:0;
 
mso-style-noshow:yes;
 
mso-style-priority:99;
 
mso-style-parent:"";
 
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
 
mso-para-margin-top:0cm;
 
mso-para-margin-right:0cm;
 
mso-para-margin-bottom:8.0pt;
 
mso-para-margin-left:0cm;
 
line-height:107%;
 
mso-pagination:widow-orphan;
 
font-size:11.0pt;
 
font-family:"Calibri",sans-serif;
 
mso-ascii-font-family:Calibri;
 
mso-ascii-theme-font:minor-latin;
 
mso-hansi-font-family:Calibri;
 
mso-hansi-theme-font:minor-latin;
 
mso-fareast-language:EN-US;}</style><![endif]-->
 
  
 
== Solar Water Heating in Social Institutions<br/> ==
 
== Solar Water Heating in Social Institutions<br/> ==
Line 839: Line 256:
 
*system performance<br/>
 
*system performance<br/>
  
These factors are contingent&nbsp; upon the location (affected by climate, insulation, taxes, cost of living, etc.) and quality of the system (wich influences performance, lifetime and cost). This can vary significantly from country to country, as well as system to system.
+
These factors are contingent&nbsp; upon the location (affected by climate, insulation, taxes, cost of living, etc.) and quality of the system (which influences performance, lifetime and cost). This can vary significantly from country to country, as well as system to system.
  
 
In contrast to households systems that use thermosiphon passive systems, SWH for social institutions are most commonly use mostly active, pumped, indirect systems. Initial investment costs range between 850 to 2400 USD/kWth (765 to 2160 EUR/kWth) with running energy costs between 10 and 29.5 USD cents/kWhth (9.5 to 26.6 EUR cents/kWhth) in central and northern Europe.<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><br/>
 
In contrast to households systems that use thermosiphon passive systems, SWH for social institutions are most commonly use mostly active, pumped, indirect systems. Initial investment costs range between 850 to 2400 USD/kWth (765 to 2160 EUR/kWth) with running energy costs between 10 and 29.5 USD cents/kWhth (9.5 to 26.6 EUR cents/kWhth) in central and northern Europe.<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><br/>
Line 851: Line 268:
 
Find more information for social institutions:
 
Find more information for social institutions:
  
*Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project. ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015. [http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf].<br/>
+
*Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project. [http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenitie][http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf s]’, 2015.<br/>
  
<br/>
+
[[#toc|►Go to Top]]
  
 
== Productive Use of Solar Water Heating ==
 
== Productive Use of Solar Water Heating ==
Line 879: Line 296:
 
| [[File:Chivay Solar Water Heater in Arequipa, PERU.JPG|border|right|300px|alt=Chivay Solar Water Heater in Arequipa, PERU.JPG]]
 
| [[File:Chivay Solar Water Heater in Arequipa, PERU.JPG|border|right|300px|alt=Chivay Solar Water Heater in Arequipa, PERU.JPG]]
 
|}
 
|}
 +
 +
[[#toc|►Go to Top]]
 +
 +
<br/>
 +
 +
<br/>
 +
 +
<br/>
 +
 +
<br/>
  
 
<br/>
 
<br/>
Line 884: Line 311:
 
= Global Market Trends for Solar Water Heaters =
 
= Global Market Trends for Solar Water Heaters =
  
The use of solar energy to generate heat is a tried and tested technology and has been used for decades.<ref name="Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.">Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.</ref>
+
*See also [[Solar Water Heaters Worldwide - Market Development|Solar Water Heaters Worldwide - Market Development]]<br/>
 +
 
 +
The use of solar energy to generate heat is a well-established technology that has been used for decades.<ref name="Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.">Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.</ref><br/>
  
Some countries have a higher degree of market penetration because the external factors are favourable:
+
Some countries have a higher degree of SWH market penetration due to favourable external factors. Some of these include:<br/>
  
#Usually energy cost is high to extremely high (USD 0.20 to 0 .60 per kWh th),
+
#high to extremely highenergy costs (USD 0.20 to 0 .60 per kWh<sub>th</sub>),<br/>
#Solar irradiance is excellent (H global- horiz > 4.5 kWh/m 2 -day), and
+
#high solar irradiance is excellent (H global- horiz > 4.5 kWh/m 2 -day), and<br/>
#Government provides support (e.g. subsidies to consumers or manufacturers, mandates, technology promotion).<ref name="Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.">Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.</ref>
+
#sufficient government support (e.g. subsidies to consumers or manufacturers, mandates, or technology promotion).<ref name="Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.">Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.</ref><br/>
  
For example, in Cyprus and Israel where SWH have been mandated since the 1980s, market penetration today is at 90% in residential homes. However, the largest market is in China with the biggest share of newly installed capacity during the past years (around 80% of globally new installed capacity).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref> The markets in Sub-Sarhan Africa, Latin America, the MENA region and other Asia (excl. China) are comparable small. See figure below.
+
For example, market penetration is at 90% in residential homes in Cyprus and Israel which can be at least partially be attributed to the establishment of SWH mandates since the 1980s. Another important example is China which has the largest market is and the biggest share of newly installed capacity (around 80% of recently installed capacity globally).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref> The markets in Sub-Saharan Africa, [[Solar Water Heaters in Latin America - Market Development|Latin America]], the MENA region and other regions within Asia (excl. China) are comparably small&nbsp; (see figure below).<br/>
  
 
'''Figure: World market for SWH of flat plate and evacuated tube collectors from 2000 to 2010.<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref>'''
 
'''Figure: World market for SWH of flat plate and evacuated tube collectors from 2000 to 2010.<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref>'''
  
'''[[File:SWH worldmarket World Energy Council 2013.png|border|left|800px|alt=SWH worldmarket World Energy Council 2013.png]]'''
+
'''[[File:SWH worldmarket World Energy Council 2013.png|border|left|600px|alt=SWH worldmarket World Energy Council 2013.png]]'''
 
<div style="clear: both"></div>
 
<div style="clear: both"></div>
Because many countries have opted for policies and financial instruments to make SWH more affordable to households, social institutions and companies, globally adoption increases on average by 25% annually during the 2000-2010 (with a lower rate due to the economic crises after 2009). Markets in Europe and China are contracting, in 2015, global SWH market only rose by 6%.<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref>
+
Because many countries have opted for policies and financial instruments to make SWH more affordable to households, social institutions and companies, global adoption of SWH has increased by an average of 25% annually between 2000-2010. The dip observed in the graph was deemed to be due to the 2009 global financial crisis. Although the graph only shows the SWH market until 2010, markets in Europe and China were found to be contracting with the SWH market only rising by 6% in 2015.<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref><br/>
 +
 
 +
The global capacity of SWH is 435 GWth in 2015.<ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.</ref><br/>
  
The global capacity of SWH is 435 GWth in 2015.<ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.</ref>
+
'''Figure: Capacity of solar water collectors, 2005-2015 (REN21, 2016)'''<br/>
  
[[File:SWH Solar water collectors capacity, 2005-2015, REN21 2016.png|border|left|800px|alt=SWH Solar water collectors capacity, 2005-2015, REN21 2016.png]]
+
[[File:SWH Solar water collectors capacity, 2005-2015, REN21 2016.png|border|left|600px|alt=SWH Solar water collectors capacity, 2005-2015, REN21 2016.png]]
 
<div style="clear: both"></div>
 
<div style="clear: both"></div>
The highest capacity is installed in the following countries: China, Turkey, Brazil, India and the United States. While China and Europe experiences slower market development than in the past, Denmark, Israel, Mexico, Poland and Turkey reported significant growth in 2015, according to the Global Status Report 2016 by REN21. <ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.</ref>
+
The highest capacity of SWH was installed in China, Turkey, Brazil, India and the United States. While Chinese and European experiences demonstrated a slower market development than in the past, Denmark, Israel, Mexico, Poland and Turkey reported significant growth in 2015, according to the Global Status Report 2016 by REN21. <ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.</ref><br/>
  
Worldwide, SWH applications differ. Globally, around half of the installed capacity is for larger domestic SWH (red bars) and the other half for smaller SWH (orange bars), with swimming pool heating (purple bars) and sophisticated SWH-combi systems (blue bars) playing only a minor role. See Figure below.
+
Most of the system installed are passive thermosyphon SWH (90%), while only 10% are active, pumped SWH.<ref name="Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.">Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.</ref>
  
*In Latin America, smaller domestic SWH have the largest share, followed by swimming pool heating. Institutional and commercial use also plays a role.
+
'''Figure: Distribution by type of system (passive vs. active) for the new installed collector capacity in 2014.<ref name="Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.">Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.</ref>'''
*In Sub-Saharan Africa, majority (two thirds) are smaller systems, with also swimming pool heating of around 30% of newly installed capacity.
 
*Swimming pool heating does not play a role in the Middle East, North Africa and Asia. IN Asia and Middle East + North Africa, around 60% of newly installed capacity are larger SWH for institutions, while in other Asian countries (except China), around 70% are smaller SWH.
 
  
'''Figure: SWH applications for newly installed capacity by region, 2014.<ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.</ref>'''
+
[[File:SWH market thermosyphonVSpumped IEA 2016.png|border|left|600px|Figure: Distribution by type of system (passive vs. active) for the new installed collector capacity in 2014. IEA 2016|alt=Figure: Distribution by type of system (passive vs. active) for the new installed collector capacity in 2014. IEA 2016]]
 +
<div style="clear: both"></div><br/>
 +
[[#toc|►Go to Top]]
  
[[File:SWH applications for newly installed capacity by region, 2014 by REN21 2016.png|border|left|800px|alt=SWH applications for newly installed capacity by region, 2014 by REN21 2016.png]]<br/><!--[if gte mso 9]><xml>
+
<br/>
<o:OfficeDocumentSettings>
 
  <o:AllowPNG/>
 
</o:OfficeDocumentSettings>
 
</xml><![endif]-->
 
  
 
<br/>
 
<br/>
Line 926: Line 353:
 
= Market Barriers and Limitations =
 
= Market Barriers and Limitations =
  
Barriers that prevent faster dissemination of SWHs are the following:
+
The barriers that prevent faster dissemination of SWHs are listed below:<ref name="Kordab, Mohamad (2009): Solar Water Heaters Development In MENA Region, Solar Thermal Application in Egypt, Palestine, Lebanon, Syriaq and Jordan: Technical Aspects, Framework conditions, and private Sector NeedsfckLRThis is a presentation from Dr. Kordab (Energy Expert of the Damascus University) during the “Solar Thermal Applications workshop” held in Syria. The event was jointly organized by the Regional Center for Renewable Energy and Energy Efficiency (RCREEE), regional organizations from Syria and Egypt and the German Development Cooperation (GTZ). Available at http://www.solarthermalworld.org/taxonomy/term/22121.">Kordab, Mohamad (2009): Solar Water Heaters Development In MENA Region, Solar Thermal Application in Egypt, Palestine, Lebanon, Syriaq and Jordan: Technical Aspects, Framework conditions, and private Sector NeedsfckLRThis is a presentation from Dr. Kordab (Energy Expert of the Damascus University) during the “Solar Thermal Applications workshop” held in Syria. The event was jointly organized by the Regional Center for Renewable Energy and Energy Efficiency (RCREEE), regional organizations from Syria and Egypt and the German Development Cooperation (GTZ). Available at http://www.solarthermalworld.org/taxonomy/term/22121.</ref><ref name="GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology">GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology</ref><ref name="UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf">UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf</ref><ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.</ref><br/>
  
*<u>Economic/Financial Barriers</u>
+
*<u>Economic/financial barriers</u>
 
**Relative high upfront costs of SWH is a major limitation in their uptake. See [[Solar Water Heater#Costs|costs]]
 
**Relative high upfront costs of SWH is a major limitation in their uptake. See [[Solar Water Heater#Costs|costs]]
  
 
*<u>Demand side and social barriers</u>
 
*<u>Demand side and social barriers</u>
**Lack of awareness at end-user level
+
**Lack of awareness at end-user level<br/>
**Pervasive inertia on the part of most residential users to switch from conventional heating and cooling systems that provide reliable supply
+
**Pervasive inertia on the part of most residential users to switch from conventional heating and cooling systems that provide a reliable supply<br/>
  
 
*<u>Supply side and technical barriers</u>
 
*<u>Supply side and technical barriers</u>
**Lack of skills of installers
+
**Lack of skills of installers<br/>
**Water quality: Solar water heaters require clean, non-hard water for long term operation. Hard or dirty water leads to blockage and corrosion of pipes and storage tanks. Closed circuit systems are recommended where water is hard.
+
**Water quality: solar water heaters require clean, non-hard water for long term operation. Hard or dirty water leads to blockage and corrosion of pipes and storage tanks. Closed circuit systems are recommended in regions where the water is hard.<br/>
**Quality of housing: Rooftops need to be strong enough for heavy water tanks and collectors.
+
**Quality of housing: rooftops need to be strong enough for heavy water tanks and collectors.<br/>
**Installation, Commissioning and Maintenance: Improper installation and commissioning and maintenance of SWHs are the leading causes of system failures. Lack of local manufacturing,
+
**Installation, commissioning and maintenance: improper installation and commissioning and maintenance of SWHs are the leading causes of system failures. Lack of local manufacturing,<br/>
 
**Lack of knowledge and SWH capabilities among architects and other decision makers within the construction and energy industries.
 
**Lack of knowledge and SWH capabilities among architects and other decision makers within the construction and energy industries.
  
*I<u>nstitutional & Legislative Barriers</u>
+
*<u>Institutional and legislative barriers</u>
 
**Lack of appropriate regulatory frameworks to guarantee that SWH meet the technical requirements to ensure appropriate and reliable operation
 
**Lack of appropriate regulatory frameworks to guarantee that SWH meet the technical requirements to ensure appropriate and reliable operation
**Lacking Standards, and quality control: with increasing local manufacturing as well as international trade of SWH, international performance standards for SWH will be important to ensure continued deployment.
+
**Lacking standards, and quality control: with increasing local manufacturing as well as international trade of SWH, international performance standards for SWH will be important to ensure continued deployment.<br/>
  
*<u>Research & Development Challenges</u>
+
*<u>Research and development challenges</u><br/>
  
<br/>
+
<br/>[[#toc|►Go to Top]]
  
 
= Impacts and Benefits of Solar Water Heaters =
 
= Impacts and Benefits of Solar Water Heaters =
  
Solar water heaters have serval impacts and benefits, especially in developing countries.
+
Solar water heaters have several impacts and benefits, especially in developing countries.
  
There are economic, political and benefits environmental:<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><ref name="SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’.">SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’.</ref><ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’.</ref>
+
Some of these economic, political and environmental benefits are listed below:<ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.</ref><ref name="SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’.">SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’.</ref><ref name="Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’.">Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’.</ref><br/>
  
 
*Potential savings in energy costs for households, social institutions and companies<br/>
 
*Potential savings in energy costs for households, social institutions and companies<br/>
*Potential savings in energy generation costs for utilities: 100 SWH with 100 litres capacity save 1 MW during peak load. All 100 million electric water heaters of the USA replaced by Solar water heaters would reduce the peak load by about 100 GW<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref>.
+
*Potential savings in energy generation costs for utilities: 100 SWH with 100 litres capacity save 1 MW during peak load. If all 100 million electric water heaters of the USA replaced by solar water heaters, the peak load would be reduced by approximately 100 GW<ref name="Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).">Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).</ref>.<br/>
 
*Creation of local jobs related to the manufacturing, commercialization, installation and maintenance of solar thermal systems
 
*Creation of local jobs related to the manufacturing, commercialization, installation and maintenance of solar thermal systems
 
*Reduction of fuel consumption: a 100 litres SWH can save up to 1500 units of electricity annually.
 
*Reduction of fuel consumption: a 100 litres SWH can save up to 1500 units of electricity annually.
 
*Possibility of improving energy security by reducing energy imports
 
*Possibility of improving energy security by reducing energy imports
*Reduction of CO2 emissions: a 100 litres SWH can prevent 1.5 tCO2/year or around 350 kg of CO2 can be saved by a SWH system with 4 m² (2.8 kWth) household size. Larger systems with a collector of 20 m² (14 kWth) could even save around 1.75 Mt CO2.<br/>
+
*Reduction of CO<sub>2 </sub>emissions: a 100 litres SWH can prevent 1.5 tCO<sub>2</sub>/year or around 350 kg of CO<sub>2</sub> can be saved by a SWH system with 4 m² (2.8 kW<sub>th</sub>) household size. Larger systems with a collector of 20 m² (14 kW<sub>th</sub>) could save approximately 1.75 Mt CO<sub>2</sub>.<br/>
 +
 
 +
[[#toc|►Go to Top]]
  
= Political environment for SWH =
+
<br/>
 +
 
 +
<br/>
 +
 
 +
= Political Environment for SWH<br/> =
  
 
== Policies ==
 
== Policies ==
 +
 +
Government support for SWH systems for low-income families and social housing projects has increased significantly in recent years.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl</ref> This support has resulted in several key policies and programmes, including:
 +
 +
*Incentive programmes that reduce high upfront costs, thereby increasing SWH access. Incentive programmes can comprise of different mechanisms, including: upfront rebates, performance-based incentives (PBIs), and hybrid incentive structures
 +
*Providing financing for innovative business models that reduce high upfront costs. This may include: low-interest lending programs, utility on-bill programs, and innovative contractor business models
 +
*SWH mandates and regulations that address landlord-tenant barriers and low customer awareness of SWH.
 +
*Training, quality control and certification programmes that increase skilled labour and SWH quality. Outreach and education programmes also fall under this category and were found to be important in generating awareness and communicating the SWH benefits.<ref name="Pedro Dias and Amr Abdelhai, ‘SOLAR WATER HEATING. A STRATEGIC PLANNING GUIDE FOR CITIES IN DEVELOPING COUNTRIES’, 2015, http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf.">Pedro Dias and Amr Abdelhai, ‘SOLAR WATER HEATING. A STRATEGIC PLANNING GUIDE FOR CITIES IN DEVELOPING COUNTRIES’, 2015, http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf.</ref>
 +
 +
Although these policies and programmes are increasing in popularity, the limited number is resulting in slow market growth and missed opportunities for many cities in developing countries.<ref name="Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf">Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf</ref>
 +
 +
On an international scale, renewable heating targets were included in the INDCs submitted to the UNFCCC by Bosnia, Malawi, Herzegovina and Jordan. At least 21 countries also have mandates for renewable heating and cooling technologies. However, fiscal incentives for renewable heating and cooling mechanisms still remain the primary method of support due to regulatory policy being a relatively slow process.
 +
 +
The following '''NAMAs '''have a direct focus on SWH:
 +
 +
*[http://www.nama-database.org/index.php/National_Solar_Water_Heating_Programme National Solar Water Heating Programme], Zimbabwe
 +
*[http://www.nama-database.org/index.php/Energy_efficiency_in_residential_buildings Energy efficiency in residential buildings], Algeria (2011-2014)
 +
*[http://www.nama-database.org/index.php/Promoting_the_use_of_Renewable_Energy_Solution_for_Households_and_Buildings_in_Rwanda Promoting the use of Renewable Energy Solution for Households and Buildings in] Rwanda (2016-2030)
 +
*[http://www.nama-database.org/index.php/Residential_buildings_energy_efficiency_in_Morocco Residential buildings energy efficiency in] Morocco (2012-2014)&nbsp;
 +
 +
'''Regulatory framework descriptions''' for a selection of countries:
 +
 +
*'''United Arab Emirates''' Solar water heating regulation (since 2011): the emirate of Dubai requires new buildings to meet 75% of their water heating requirements by solar power. In case a swimming pool is included in the building footprint, 50% of its water heating requirements must be met by solar power. Source: [http://www.iea.org/policiesandmeasures/pams/unitedarabemirates/name-31250-en.php?return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,,&s=dHlwZT1yZSZzdGF0dXM9T2s, IEA database]
 +
*'''Burkina Faso''' Law of finance 2013 relative to the deletion of customs charges and value-added tax on solar energy equipment and material . Source: [https://www.iea.org/policiesandmeasures/pams/burkinafaso/name-46871-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
*'''Kenya '''Solar water heating regulations (since 2012): These target premises with hot water requirements above 100 litres: new buildings with hot water requirements of over 100 litres will have to install solar heating systems while the existing ones have 5 years to install and use solar heating systems that cover at least 60% of their hot water demand. Source: [https://www.iea.org/policiesandmeasures/pams/kenya/name-32095-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
*'''El Salvador''': Master Plan for Renewable Energy Development (2012-2026): target of 200 MW of new installed capacity of solar thermal energy until 2026. Source: [https://www.iea.org/policiesandmeasures/pams/elsalvador/name-159633-en.php IEA database]
 +
*'''Uruguay '''Solar Thermal Energy Plan (since 2012): The plan grants incentives to households and businesses that buy SWH through credit; electricity bill gets discounts. It was designed and implemented by the state-owned generation and transmission UTE. Source: [https://www.iea.org/policiesandmeasures/pams/uruguay/name-31972-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
*'''Uruguay '''Solar Thermal Energy (since 2011) The decree regulates some obligations on health care centres, hotels, sports clubs and public buildings for water heating, on a progressive basis. The decree also establishes some tax exemptions for the acquisition of solar panels. Source: [https://www.iea.org/policiesandmeasures/pams/uruguay/name-31979-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
*'''Chile '''Regulatory Framework for Solar Water Thermal. A tax rebate programme for solar water heater (SWH) constructors. Source: [https://www.iea.org/policiesandmeasures/pams/chile/name-24762-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
*'''Brazil '''Brazil National Climate Change Plan (since 2008): refers to the residential sector and seeks to stimulate the use of solar water heaters. Source: [https://www.iea.org/policiesandmeasures/pams/brazil/name-24532-en.php?s=dHlwZT1yZSZzdGF0dXM9T2s,&return=PG5hdiBpZD0iYnJlYWRjcnVtYiI-PGEgaHJlZj0iLyI-SG9tZTwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy8iPlBvbGljaWVzIGFuZCBNZWFzdXJlczwvYT4gJnJhcXVvOyA8YSBocmVmPSIvcG9saWNpZXNhbmRtZWFzdXJlcy9yZW5ld2FibGVlbmVyZ3kvIj5SZW5ld2FibGUgRW5lcmd5PC9hPjwvbmF2Pg,, IEA database]
 +
 +
== Standards and Quality Aspects ==
 +
 +
The quality of industrial solar water heaters and services: for maintenance, replacement and repair vary greatly. This is due to a number of reasons, including:
 +
 +
*A lack of certified and trained practitioners: although SWH are often imported, the onsite installation of the systems is often relatively complex and requires trained professionals. Unfortunately, these trained professionals are often non-existent (particularly in rural regions). This can result in a less efficient system being installed.
 +
*A lack of standardisation enforcement: The dispersed nature of SWH manufacturing has thus far hampered the enforcement of standardisation. In most countries, the SWH market is dominated by hundreds to thousands of small- and medium-size enterprises with only a small number of multinational enterprises.<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf</ref> Tracking and enforcing standardisation on all of these operations is therefore difficult.
 +
*Transportation of standardized components: GIZ experience from Tajikistan showed that the import of glass vacuum solar water heaters from China was not feasible as a high percentage of glass pipes break during the transport resulting in difficulties in ordering spare pipes and solar water heater installation problems in rural settings.<ref name="Anna Brüderle, Johanna Hartmann, and Katja Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’ (Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH - Programme - Poverty-oriented Basic Energy Services (HERA) and European Union Energy Initiative Partnership Dialogue Facility (EUEI PD, 2014), https://energypedia.info/images/2/24/Productive_Use_of_Thermal_Energy_Overview.pdf.Brüderle, Hartmann, and Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’.">Anna Brüderle, Johanna Hartmann, and Katja Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’ (Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH - Programme - Poverty-oriented Basic Energy Services (HERA) and European Union Energy Initiative Partnership Dialogue Facility (EUEI PD, 2014), https://energypedia.info/images/2/24/Productive_Use_of_Thermal_Energy_Overview.pdf.Brüderle, Hartmann, and Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’.</ref> This indicates that although the equipment may be standardized, it could still result in difficulties and subsequently other, non-standardized, material being used.
 +
 +
<br/>[[#toc|►Go to Top]]
  
 
= Actors in the Field of SWH<br/> =
 
= Actors in the Field of SWH<br/> =
  
 
== Companies/Technology Providers ==
 
== Companies/Technology Providers ==
 +
 +
According to DENA, Germany is the global leader for quality products with German solar thermal energy companies having many years of comprehensive experience in producing, planning and building solar heating systems and their components.<ref name="Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’">Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’</ref>
 +
 +
*[http://energy.sourceguides.com/businesses/byGeo/byC/Germany/byP/solar/solar-water-heating/byB/manufacturers/manufacturers.shtml List of German providers of Solar Water Heaters]
 +
 +
China is a primary manufacturer and installer of SWH with over 5,000 small- and medium scale companies (only 10 of them opperate at a larger scale).<ref name="International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf.">International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf.</ref> However, most of them are small and rural with no product quality control.<ref name="Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.">Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.</ref> Moreover, the Chinese SWH market has been predominately in rural areas and is characterised by inexpensive SWH, The substantial government support to consumers and to manufacturers is reflected in the high energy cost relative to income and highly intermittent or non-existent conventional energy supplies.<ref name="Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.">Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.</ref><ref>Bennu Solar customizes, brand, and mass produce solar products and appliances for use in rural Africa. Headquartered in Hong Kong, and with three warehouses hubs throughout China, they offer a supply chain solution for solar businesses which operate in Africa. Since 2009, they serve clients to deliver solar products into over 30 developing countries.</ref><br/>
 +
 +
India has over 100 approved SWH manufacturers (60 for flat plate collectors and 44 for evacuated tube collectors).<ref name="Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.">Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.</ref><br/>
 +
 +
Mexico’s association lists [http://www.anes.org/cms/socios.php 14 SWH providers on their homepage].<br/>
 +
 +
*[http://energy.sourceguides.com/businesses/byP/solar/solar-water-heating/byN/byName.shtml List of SWH providers worldwide] (37 providers)
 +
 +
Some of the bigger US companies operate worldwide:
 +
 +
*[http://solahart.com/ Solahart]: In 80+ countries with an average system life expectancy: 19.2 years
 +
*[http://www.siliconsolar.com Silicon Solar]: has multi-national offices to serve emerging markets and developing nations around the world (NY, Philippines, China, India); Price: 400-1,250 USD<ref name="http://www.siliconsolar.com/shop/solar-store/solar-hot-water-heaters/thermosyphon-solar-hot-water/">http://www.siliconsolar.com/shop/solar-store/solar-hot-water-heaters/thermosyphon-solar-hot-water/</ref>
 +
*[http://www.rheem.com/products/water_heating/solar/?&utm_source=/products/solar_water_heating/&utm_medium=vanityURL&utm_campaign=vanityURL Rheem]: has several international offices (also Latin America, Middle East)<br/>
 +
 +
Among the 40 companies mentioned in [http://sustainnovate.ae/en/innovators-blog/detail/40-companies-organizations-bringing-solar-power-to-the-developing-world this article from 2014], there are 6 explicitly mentioned in providing solar water heaters. All are Zayed Future Energy Prize finalists and winners.
 +
 +
*India: [http://orbenergy.com/ Orb Energy]&nbsp;was a 2012 Zayed Future Energy Prize finalist in the SME & NGO category (those two categories were combined back in 2012). It serves the Indian market. It sells, installs, and services solar hot water systems, next to solar PV systems, solar lighting, and solar-powered air conditioning.
 +
*India: [http://www.barefootcollege.org/ Barefoot College]&nbsp;shows again that innovation isn’t over.&nbsp;[http://www.barefootcollege.org/about/ Its story]&nbsp;is worth a read. And its work is much broader than the solar solutions it provides, but since this article is about solar power, the reason Barefoot College is on the list is because it provides solar water heaters to those living in rural India.
 +
*India:&nbsp;[http://onergy.in/ ONergy], yet another India-based social enterprise, has been providing solar water heating systems and others to underserved households and institutions in India since 2009.
 +
*India: [http://www.waaree.com/ Waaree]&nbsp;is an Indian manufacturer of solar modules, but it also provides services for solar hot water systems, and distributes other solar products.
 +
*Afghanistan: The solar company,&nbsp;[http://www.afghan-solar.com/ Zularistan]&nbsp;offers solar water heaters, among other solar technologies.
 +
*Togo: [http://www.monoege.com/en/about.asp?Unid=41 Mono Eco Green Energy]&nbsp;is based in Togo and serves Togo as well as other African countries. It sells and installs solar hot water heaters, and other solar technologies.
 +
 +
<br/>[[#toc|►Go to Top]]
  
 
== Research Institutes ==
 
== Research Institutes ==
 +
 +
Global Energy Network Institute (GENI):
 +
 +
*[http://www.geni.org/globalenergy/research/#solarwaterheaters http://www.geni.org/globalenergy/research/#solarwaterheaters]
 +
*[http://www.geni.org/globalenergy/research/solar-water-heaters/solar-water-heater.pdf http://www.geni.org/globalenergy/research/solar-water-heaters/solar-water-heater.pdf]
 +
 +
Asia
 +
 +
*India: [http://www.mnre.gov.in/schemes/decentralized-systems/solar-systems/solar-water-heatres-air-heating-systems/ Ministry of new and renewable energ]y&nbsp; and [http://www.jreda.com/programme/solar_thermal_technologies.htm Jharkhand Renewable Energy Development Agency (JREDA)]&nbsp; and [http://nise.res.in/SolarThermalDivision.php National Institute of Solar Energ]y, an autonomous institution of Ministry of New and Renewable (MNRE), India
 +
 +
Africa
 +
 +
*ECOWAS [http://www.iea-shc.org/ecreee Regional Centre for Renewable Energy and Energy Efficiency] (ECREEE)
 +
 +
MENA
 +
 +
*[http://rcreee.org/projects/solar-heating-arab-mark-and-certification-initiative-shamci The Solar Heating Arab Mark and Certification Initiative (SHAMCI)] is a quality certification scheme for the production of solar thermal products and services in the Arab region.&nbsp;SHAMCI is the first Arab certification scheme for solar thermal products. It is built around specific characteristics and needs of Arab states in the Middle East and North Africa. SHAMCI is inspired by Solar Keymark, the European certification scheme.
 +
 +
USA
 +
 +
*Energy Department: [https://energy.gov/eere/energybasics/articles/solar-water-heater-basics https://energy.gov/eere/energybasics/articles/solar-water-heater-basics]
 +
*National renewable energy laboratory ([https://www.nrel.gov/workingwithus/re-solar.html NREL])
 +
*NREL's centres for scientific and technological excellence support the research and development efforts of the U.S. Department of Energy, including significant photovoltaic and solar thermal research: [https://www.nrel.gov/solar/ https://www.nrel.gov/solar/]
 +
*Florida Solar Energy Center: [http://www.fsec.ucf.edu/en/research/solarthermal/index.htm Solar Thermal] and [http://www.fsec.ucf.edu/en/consumer/solar_hot_water/ Solar Hot Water]
 +
 +
Solar Energy Research Institute (SERI), Malaysia
 +
 +
*[http://www.ukm.my/seri/solar-thermal/ http://www.ukm.my/seri/solar-thermal/]
 +
 +
<br/>[[#toc|►Go to Top]]
 +
 +
=== Certification ===
 +
 +
*Global Solar Certification Network: [http://www.gscn.solar/ http://www.gscn.solar/]: The “Global Solar Certification Network” is a cooperation between solar certification bodies/schemes around the world. When a product has been certified by one of the participating certification bodies/schemes, the product can obtain certification from other participating certification schemes without re-testing of the product and without re-inspection of production facilities.
 +
*Europe: [http://www.estif.org/solarkeymarknew/index.php The Solar Keymark] (European certification scheme) and [http://www.estif.org/ European Solar Thermal Industry Federation: ESTIF]
 +
*North America: SRCC, IAPMO, CSA
 +
*Asia: Golden Sun
 +
*Africa: SHAMCI
 +
*Latin America and Caribbean: no information
 +
 +
<br/>[[#toc|►Go to Top]]
 +
 +
<br/>
  
 
== National and International Organisations, NGOs ==
 
== National and International Organisations, NGOs ==
  
 +
=== International Energy Agency ===
 +
 +
[https://www.iea-shc.org/ The Solar Heating and Cooling Programme (SHC)] was established in 1977, as one of the first programmes of the International Energy Agency, to promote the use of all aspects of solar thermal energy.
 +
 +
=== National and Regional Associations and Organisations ===
 +
 +
*[http://SolarThermalWorld.org SolarThermalWorld.org]
 +
*[http://www.ises.org/home/ International Solar Energy Society]
 +
*[http://www.iso.org/iso/iso_technical_committee?commid=54018 ISO/TC 180 Solar Energy]
 +
*Mexico: [http://www.anes.org/cms/index.php Asociación Nacional de Energía Solar (ANES)]
 +
 +
*[http://www.seia.org/research-resources/environment-america-solar-hot-water-2011-report Solar Energy Industries Association] (USA) and their [http://www.seia.org/research-resources/solar-research-links list of research links].
 +
*The [https://solaractionalliance.org/heating/ Solar Action Alliance] is a group of environmentalists who want to spread the word about the most clean, reliable, and abundant source of renewable energy the sun.
 +
 +
[[#toc|►Go to Top]]
 +
 +
=== NGOs ===
 +
 +
*Bennu Solar [http://bennu-solar.com/resources/by-region/#.WNKjnme1vIV lists many companies and organisations]active in the solar energy field for many countries (sorted by region).
 +
*The [https://solaractionalliance.org/heating/ Solar Action Alliance] is a group of environmentalists who want to spread the word about the most clean, reliable, and abundant source of renewable energy the sun.
 +
 +
[[#toc|►Go to Top]]
 +
 +
<br/>
 +
 +
<br/>
 +
 +
<br/>
 +
 +
<br/>
  
 
= Further information =
 
= Further information =
  
*[[Portal:Solar|Solar portal on energypedia]]<br/>
+
*[[:Portal:Solar|Solar portal on energypedia]]<br/>
*[[Category:Solar_Heater|All articles on solar heaters]]<br/>
+
*[[:Category:Solar Heater|All articles on solar water heaters]]
 +
*[[Solar Thermal Technologies|Solar thermal technologies]]
 +
*[[Solar Water Heaters Worldwide - Market Development|Solar Water Heaters Worldwide - Market Development]]
 +
 
 
*Technical Brief: Solar Water Heating by Amy Punter. This publication by Practical Action explains how solar energy may be used to heat water and how the technology works. [http://practicalaction.org/solar-water-heating http://practicalaction.org/solar-water-heating]
 
*Technical Brief: Solar Water Heating by Amy Punter. This publication by Practical Action explains how solar energy may be used to heat water and how the technology works. [http://practicalaction.org/solar-water-heating http://practicalaction.org/solar-water-heating]
*Construction of Solar Collectors for Warm Water – Practical guide by Regina Drexel and Rostom Gamisonia. This brochure by Women in Europe for a Common Future shows how to use the energy from the sun for heating water, how to construct a solar water heater and gives an overview of other solar collector models. [http://www.wecf.eu/download/2010/WECF_Construction_ of_solar_collectors.pdf http://www.wecf.eu/download/2010/WECF_Construction_ of_solar_collectors.pdf]&nbsp;
+
*[http://www.wecf.eu/download/2010/WECF_Construction__of_solar_collectors.pdf Construction of Solar Collectors for Warm Water] – Practical guide by Regina Drexel and Rostom Gamisonia. This brochure by Women in Europe for a Common Future shows how to use the energy from the sun for heating water, how to construct a solar water heater and gives an overview of other solar collector models.
*Solar Water Heater with Thermosyphon Circulation by Bernd Sitzmann. This publication describes briefly the advantages and engineering aspects of solar water heaters with thermasyphon circulation. [http://www.gate-international.org/documents/techbriefs/webdocs/pdfs/e021e_2003.pdf http://www.gate-international.org/documents/techbriefs/webdocs/pdfs/e021e_2003.pdf]&nbsp;&nbsp;
+
*[[:File:Solar_Water_Heater_with_Thermosyphon_Circulation_GATE_2003_Bernd_Sitzmann.pdf|Solar Water Heater with Thermosyphon Circulation]] by Bernd Sitzmann. This publication describes briefly the advantages and engineering aspects of solar water heaters with thermosyphon circulation.&nbsp;&nbsp;
*Guidelines for Fabrication of serpentine solar water heaters by Ben Dana. Practical Action, 2009. [http://answers.practicalaction.org/our-resources/item/serpentine-solar-water-heating-guidelines-for-fabrication http://answers.practicalaction.org/our-resources/item/serpentine-solar-water-heating-guidelines-for-fabrication]
+
*[http://answers.practicalaction.org/our-resources/item/serpentine-solar-water-heating-guidelines-for-fabrication Guidelines for Fabrication of serpentine solar water heaters] by Ben Dana. Practical Action, 2009.
*Two very comprehensive studies on the Solar Heating and Cooling Sector were published in early June 2016: REN21’s the Renewables 2016 Global Status Report (GSR2016) from REN21 and Solar Heat Worldwide from the IEA Solar Heating and Cooling programme (IEA SHC). This webinar will highlight the key data and findings of these two studies looking at new installations, prospering applications, market barriers, industry trends, costs of solar heat and jobs. [http://www.solarthermalworld.org/content/webinar-global-view-solar-heating-and-cooling-market-industry-and-policy http://www.solarthermalworld.org/content/webinar-global-view-solar-heating-and-cooling-market-industry-and-policy]
+
*Two very comprehensive studies on the Solar Heating and Cooling Sector were published in early June 2016: REN21’s the [http://www.solarthermalworld.org/content/webinar-global-view-solar-heating-and-cooling-market-industry-and-policy Renewables 2016 Global Status Report (GSR2016) from REN21 and Solar Heat Worldwide] from the IEA Solar Heating and Cooling programme (IEA SHC). This webinar will highlight the key data and findings of these two studies looking at new installations, prospering applications, market barriers, industry trends, costs of solar heat and jobs.
 
*IRENA offers various trainings regarding solar water heating, e.g. [https://irelp.irena.org/courses/description.aspx?CourID=152 Solar Water Heating Project Feasibility Analysis Course]
 
*IRENA offers various trainings regarding solar water heating, e.g. [https://irelp.irena.org/courses/description.aspx?CourID=152 Solar Water Heating Project Feasibility Analysis Course]
*How to set up a test laboratory for Solar Water Heater (2015) by Research and Testing Centre for Thermal Solar Systems (TZS) Stephan Fischer: [http://www.irena.org/EventDocs/Costa Rica/8-Setup test lab SWH -Stephan Fischer.pdf http://www.irena.org/EventDocs/Costa Rica/8-Setup test lab SWH -Stephan Fischer.pdf]
+
*[http://www.irena.org/EventDocs/Costa_Rica/8-Setup_test_lab_SWH_-Stephan_Fischer.pdf How to set up a test laboratory for Solar Water Heater] (2015) by Research and Testing Centre for Thermal Solar Systems (TZS) Stephan Fischer.
*IRENA held a Forum on Quality Assurance Schemes for Solar Water Heating in Latin America and the Caribbean 29-30 June 2015 in San Jose, Costa Rica. [http://www.irena.org/menu/index.aspx?CatID=79&PriMenuID=30&SubcatID=623&mnu=Subcat http://www.irena.org/menu/index.aspx?CatID=79&PriMenuID=30&SubcatID=623&mnu=Subcat]
+
*IRENA held a [http://www.irena.org/menu/index.aspx?CatID=79&PriMenuID=30&SubcatID=623&mnu=Subcat Forum on Quality Assurance Schemes for Solar Water Heating in Latin America and the Caribbean] 29-30 June 2015 in San Jose, Costa Rica.
*Introduction to solar thermal technology: [https://energypedia.info/images/9/95/Solar_Thermal_Energy_Basis_Mr_Kofler_ITW.pdf https://energypedia.info/images/9/95/Solar_Thermal_Energy_Basis_Mr_Kofler_ITW.pdf]
+
*[https://energypedia.info/images/9/95/Solar_Thermal_Energy_Basis_Mr_Kofler_ITW.pdf Introduction to solar thermal technology].
*[[:File:Solar Heat for Industrial Process in Tunisia. An Economic Assessment with Policy Recommendations.pdf|Solar Heat for Industrial Processes in Tunisia: An Economic Assessment with Policy Recommendations (2014) by Filip Schaffitzel]]
+
*[[:File:Solar Heat for Industrial Process in Tunisia. An Economic Assessment with Policy Recommendations.pdf|Solar Heat for Industrial Processes in Tunisia: An Economic Assessment with Policy Recommendations]](2014) by Filip Schaffitzel
*FSEC Public Information Office. ‘Solar Water Heater Troubleshooting Checklist’. Florida Solar Energy Center. Accessed 9 March 2017. [http://www.fsec.ucf.edu/en/publications/pdf/FSEC-FS-32-86.pdf http://www.fsec.ucf.edu/en/publications/pdf/FSEC-FS-32-86.pdf]
+
*FSEC Public Information Office. [http://www.fsec.ucf.edu/en/publications/pdf/FSEC-FS-32-86.pdf Solar Water Heater Troubleshooting Checklist]’. Florida Solar Energy Center. Accessed 9 March 2017.
 
*John Harrison & Tom Tiedeman. ‘Thermosyphon Systems - Passive Solar Water Heating Systems’, 1997. [http://www.flasolar.com/thermosyphon_systems.htm http://www.flasolar.com/thermosyphon_systems.htm]
 
*John Harrison & Tom Tiedeman. ‘Thermosyphon Systems - Passive Solar Water Heating Systems’, 1997. [http://www.flasolar.com/thermosyphon_systems.htm http://www.flasolar.com/thermosyphon_systems.htm]
 +
*Philibert, Cédric. ‘[https://www.iea.org/publications/freepublications/publication/Solar_Thermal.pdf Barriers to Technology Diffusion: The Case of Solar Thermal Technologies]’. Organisation for Economic Co-operation and Development and International Energy Agency, Paris, 2006.
 +
 +
[[#toc|►Go to Top]];<br/>
  
 
<br/>
 
<br/>
  
 +
= References =
  
= References =
+
<references /><br/>[[#toc|►Go to Top]]
  
<references /><br/>
+
[[Category:Water_Heating]]
 +
[[Category:Solar]]

Latest revision as of 12:23, 15 December 2021

Overview

A SWH with a water tank in Bolivia. (Picture: GIZ Energising Development Bolivia)

Obtaining hot water is energy intensive. In developing countries, households often spend a large portion of their energy budget on heating water. Solar thermal water heaters are a sustainable solution for poor households as they allow the barrier of high upfront costs to be overcome.[1]

The technology of solar thermal water heaters is present worldwide and significant deployments are already occurring in emerging economies and developing countries. Regions that do not experience freezing temperatures can use the simplest and most cost-effective kinds of this technology.[2] In fact, more than 90% of systems worldwide are based on the thermosiphon principle (for a definition see below regarding passive systems).[3]


The Technology

Solar water heating (SWH) systems are typically composed of:

  • Solar thermal collectors (flat plate or evacuated tube)
  • A storage tank
  • A circulation loop.

State of the art solar water heaters incorporate features such as: selective surface absorbers, anti-reflective glazing, well-designed collector arrays, and efficient storage systems thereby achieving operation efficiencies of the order of 35 to 40%. Even the simplest types allow households to have convenient access to hot water.[4].


►Go to Top

Active vs. Passive Systems

SWH can be either active system or pasive systems:

Active system: collector, tank, pipe and controller
  • Active systems use either pumps to circulate water or a heat transfer fluid which utilizes electrical components (e.g. a controller). There are two types of active solar water-heating systems:
  1. Direct-circulation systems use pumps to circulate pressurized potable water directly through the collectors. These systems are appropriate in areas that do not freeze for long periods and do not have hard or acidic water.
  2. Indirect-circulation systems pump heat-transfer fluids through collectors. Heat exchangers transfer the heat from the fluid to the potable water. Some indirect systems have "overheat protection" which is a method of protecting the collector and the glycol fluid from becoming super-heated when the load is low and the intensity of incoming solar radiation is high.



Passive system: collector and tank
  • Passive systems transfer and circulate heat naturally. Passive solar water heaters rely on gravity and the tendency for water to naturally circulate as it is heated. Because they contain no electrical components, passive systems are generally more reliable, easier to maintain, and possibly have a longer work-life than active systems. The two common types of passive systems are described below:
  1. Integral-collector storage systems or batch systems consist of a tank that is directly heated by sunlight. These are the oldest and simplest solar water heater designs and are good for households with significant daytime and evening hot-water needs. However, they do not work well in households with predominantly morning usage because they lose most of the collected energy overnight. These solar collectors are suited for areas where temperatures rarely go below freezing.
  2. Thermosyphon systems are an economical and reliable choice. These systems rely on the natural convection of warm water rising to circulate water through the collectors and to a storage tank located above the collector. As water in the solar collector heats, it becomes lighter and rises naturally into the tank above. Meanwhile, the cooler water flows down the pipes to the bottom of the collector, thereby enhancing the circulation. Indirect Thermosiphon systems use a glycol fluid in the collector loop as a heating medium.[5]

Most solar thermal systems installed in developing countries are thermosiphon systems.


►Go to Top


Collectors

Flat plate as well as evacuated tube collectors are both used for thermosiphon systems.[6]


Flat Plate Collector

A flat plate is the most common type of solar thermal collector and is typically used as a solar hot water panel to generate hot water. A weatherproofed, insulated box containing a black metal absorber sheet with built-in pipes is placed in the path of sunlight. They can be deployed on the roof of buildings or on the ground. Solar energy heats the water in the pipes causing it to circulate through the system by natural convection. The water is then usually passed to a storage tank located above the collector.

There are many flat-plate collector designs but generally all consist of:

  1. a flat-plate absorber which intercepts and absorbs the solar energy,
  2. a transparent cover that allows solar energy to pass through but reduces heat loss from the absorber,
  3. a heat-transport fluid (air, antifreeze or water) flowing through tubes to remove heat from the absorber and
  4. a heat insulating backing.

One flat plate collector is designed to be evacuated, therefore preventing heat loss. The absorber can be made from a wide range of materials, including: copper, stainless steel, galvanised steel, aluminium and plastics. When choosing an absorber material it is important to ensure that it is compatible, from the point of view of corrosion, with the other components in the system and with the heat transfer fluid used. The absorber must also be able to withstand the highest temperature that it might reach on a sunny day when no fluid is flowing in the collector (known as the stagnation temperature).

The fluid passageways of the absorber may consist of tubes bonded to an absorbing plate or may form an integral part of the absorber. Experience has shown that the simple mechanical clamping of tubes to an absorber plate is likely to result in an absorber with a poor efficiency. A good thermal bond, such as a braze, weld or high temperature solder, is required for tube and plate designs as it ensures efficient heat transfer from the absorbing surface into the fluid.

Matt black paints are commonly used for absorber surfaces because they are relatively cheap, simple to apply and may be easily repaired. Paints, however, have the disadvantage that they are usually strong emitters of thermal radiation (infrared) and at a high temperature this results in significant heat losses from the front of the collector. Heat losses from the collector can be substantially reduced by the use of absorber coatings known as 'selective surfaces'. These surfaces may be applied by electroplating or by dipping a metal absorber in appropriate chemicals to produce a thin semi-conducting film over the surface. The thin film will be transparent to solar radiation while simultaneously appearing opaque to thermal radiation. However, these surfaces cannot be produced or applied easily.

Flat-plate collectors usually have a transparent cover made of glass or plastic. The cover is required to reduce heat losses from the front of the collector and to protect the absorber and the insulation from the weather. Most covers mimic a greenhouse environment. They permit solar radiation to pass into the collector while also absorbing the thermal radiation emitted by the hot absorber.

At night it is possible for the collector to lose heat by radiation resulting in the circulation being reversed and the water cooling. This can be overcome by use of a suitable non-return valve. However, there is a danger with solar collectors when used under clear night conditions (e.g. in arid and semi-arid regions) that they can actually freeze even when the ambient temperature is above freezing point. In such conditions it may be necessary to have a primary circuit through the collector filled with antifreeze and a separate indirect hot water cylinder where the water from the collector passes through a copper coil to heat the main water supply. This problem will only apply in certain desert regions during the cold season or at high altitudes in the tropics and sub-tropics.


►Go to Top

Evacuated Tube Collector

Evacuated-tube solar collectors tend to be more efficient but also more expensive. They are used more frequently for commercial applications in the U.S.A. A collector is made up of several pipes in parallel rows that are connected at the top. The tubes consist of a vacuum with a pipe running through the middle containing the working fluid. The water moves up and down and along through the series of pipes to exit the system at a significantly higher temperature. The heat loss is significantly reduced thanks to high negative pressure in the glass tubes. They can be deployed nearly horizontally on flat roofs.[7][8]


►Go to Top


Installation and Maintenance

Basic rules for a good installation include: a preliminary study and a needs assessment to determine the best size for the specific installation and a location that is  well-exposed to the sun with no shading (from nearby buildings, vegetation, etc.).[9] 

The following data is required to design, size and select a solar water heating system:: daily hot water requirement (litres/day), average insolation (kWh/m2 day), water quality and storage requirements[4].

Find more technical details on SWH: GENI: Solar Water Heaters

Solar thermal systems are relatively maintenance free and only require  an  inspection of the piping for leaks and the cleaning of the collectors on an occasional basis. In some regions, it may also be necessary to inspect the transfer fluid for freeze protection and to remove the build-up of lime scale that chokes the collector and tank recirculating pipes over time.


►Go to Top;

Advantages and Disadvantages of Thermosiphon SWH

Advantages and disadvantages of thermosiphon Solar Water Heaters
Advantages
Disadvantages
  • very simple systems
  • only applicable in regions without frost
  • very efficient systems
  • (aesthetic aspects)
  • very cheap

  • no electricity, no pump, no controller

  • self-controlling systems



Solar water heater thermosiphon in Peru:

GIZ Brinkmann Peru SWH Themosyphon.JPG



►Go to Top


Costs

Solar water heating systems are usually more expensive than conventional water heating systems when electricity is available. However, a solar water heater can save money in the long run.

How much money can be saved depends on:

  • the amount of hot water needed,
  • the performance of the system,
  • the geographic location and solar resource availability ,
  • available public financing and incentives,
  • the cost of fuels (e.g. natural gas, oil, electricity, biomass) otherwise used for heating water,
  • the cost of the fuel used for the backup water heating system (if existing).[10]

SWH are very efficient, and can reduce either the electricity needs or reduce the costs for heating water by nearly 75% annually.[9]

Initial costs for a solar thermal system vary among countries and depend on the quality of the solar collector, the labour costs of installation, and also on the climate conditions in which the solar thermal systems works. Initial costs depend on the level of governmental support for SWH as well as the development of local industries. Quality of the solar collector: Lower quality products are assumed to have a life expectancy of only half of higher quality products.[11]

See details for different system sizes within the chapter about households, social institutions and productive use.


►Go to Top


Target Groups for SWH

SWHs are employed in: residential, public buildings and institutions, commercial and industrial buildings and in industrial processes (drying, pre-heating boiler feed water, cleaning, etc. - see examples for potential on solar thermal applications in industries in India) for the provision of hot water, heat and cooling.

Energy demand for hot water is often difficult to predict as hot water demand is influenced by factors such as: user habits, number and efficiency of appliances and the required water temperature.[5]

The current commercial market for SWH is predominantly: households (mostly high income), hospitals, commercial establishments and tourist facilities. Therefore, this article distinguishes between Solar Water Heating for household uses, for: social institutions, like schools or hospitals and for productive uses in commercial enterprises.


►Go to Top

SWH for Households

Household interests differ depending on their demand, the availability of different system sizes and what they can afford to pay. Relevant questions are, for example, how big must the system be for a family? How many liters of water can usually be heated? How much are the initial costs? What are the alterative costs for biomass heating or other options? What is the payback time for the SWH?

The system size depends on the number of family members and on the climate: In hotter climates, thermosiphon SWH have often only a smaller collector area of around 2-4 m² and a 100-300 litre storage tank. In China, for example, thermosiphon SWH with an evacuated tube collector of around 2 m² have a hot water storage tank of around 120-200 litres.[12] In Ghana, a family (of 4 people) will demand 200l of hot water daily, assuming an average hot water demand of 50l per day.[13] 

The thermosiphon SWH for households usually have a collector area in the range between 2 m² (Israel) and 4 m² (India, South Africa, Turkey) and a corresponding hot water storage tank between 150 L and 400 L. SWH systems last between 10 and 15 years.[6] A 300-liter system is typically suited for family of 4-6 persons and will provide up to 1000 kWh of electricity annually.[14]

Costs for SWH largely vary among countries: usually prices for SHW are between USD 250-2,500/kW. However, in some developing countries prices could be less than half of this. The figure below shows that the costs for a SWH do not only depend on the type of SWH (blue dots: flat plate collector, red dots: evacuated tube collector, or green dots: active system with a pump) or the collector area, but also on the costs for specific applications of each system (e.g. different materials for tanks, insulation, piping) or other characteristics like warranty (e.g., 5 or 10 years).[12]

Figure: Prices for final customers for internationally traded thermosiphon systems (2014).[12]

SWH costs IRENA.png


The levelized costs of solar thermal generated heat for thermosiphon hot water systems are between 2.1 €-ct/kWh (e.g. in Turkey) and 11.6 €-ct/kWh (Australia).[6] Most solar thermal systems have a relatively high up-front cost of between USD 2,000 and 4,500. However, this price is often cost competitive when the total energy expenses are averaged over the entire lifetime of the systems (e.g. compared to electricity-based (generators) or biomass heated water).[15]

In China, initial investment costs for a direct thermosiphon systems for households with average collector size of 4 m² (2.8 kW th ) range from 100 to 250 USD/kW th (90 to 225 EUR/kW th ) with an energy cost ranging from 2 to 5 USD cents/kWh th (1.8 to 4.5 EUR cents/kWh th ). In the Mediterranean region, the average cost for a open-loop, pressure-less thermosiphon systems (180 litre hot water, 70 litre feeding tank) is around 920 USD (830 EUR).[16]

It has been demonstrated that in Rwanda, households can save up to 70% of their electrical bills after switching to a solar SWH. A payback period of 3-5 years is common with variables including: geographical areas, water consumption patterns and the type of system selected. After the payback period, the SWH produces hot water without charging the recipient.[17] The solaRwanda programme even offers a subsidy for quality approved systems to minimise the high upfront costs.

It was found that switching from electrical to solar water heating systems would lead to yearly energy savings of approximately 930kWh within a local Native American community of California. Using the SWH for showering and other daily hot water uses, the payback period is only 7 years.[18]

Low temperature flat-plate solar collectors typically cost 21 US $ per square metre (0,0021 US $ /cm²). Medium to high temperature collectors generally cost approximately 200 US $ per square metre. Flat plate collectors are sized at approximately 0,1 square metre (929 cm²) per gallon (3,79 l ) of daily hot water use or 245 cm² per l of hot water. A complete system installed costs approximately 14 US $/l or 2000 US $ per 150 l.[19]

Table: Costs of SWH in a selection of countries according to the IEA SHC programme[20]

Country
Costs
Burkina Faso
0,7 m2 with 56L: 100,000 FCFA (152 EUR)
1,4 m2 with 100L: 225,000 FCFA (343 EUR)
2m2 with 100L: 525,000 FCFA (800 EUR)
6m2 with 300L: 1,100,000 FCFA (1,600 EUR)
Capo Verde

Price found in the market is around 700 € to 850 € per square meter, all included (storage tank, pipes, valves, installation, etc.). The most common type of imported solar collector is the indirect thermosiphon system of flat plate ranging from 150 litres to 300 litres; normally the 150 litres units have 2 m2 of area. Direct type collector of 160 litres capacity is also imported.

Ghana

The cost of solar water heating systems and components in Ghana varies depending on the country of origin and the company that manufactured it.

  • Flat plate thermosyphon: 4050 GH (888€)
  • Evacuated tube pumped system: 6600 GH (1400€)
Nigeria
A typical 150 litre system with evacuated tubes cost about N100,000 (€444) with an installation cost of about N30,000 (€133).
Senegal

Costs range from FCFA 350,000 (~ 540 €) to 1,250,000 CFA (~ 1920 €) depending on the type of SWH. The connection cost ranges from 75,000 CFA (~ € 115) to 125,000 CFA francs (~ 190 €).

►Go to Top

Solar Water Heating in Social Institutions

Solar Water Heaters are used in different social institutions, wherever there is a substantial use of domestic hot water. These include schools, hospitals, swimming pools and sport facilities, dormitories, retirement homes, etc. The sizes of SWH installations vary widely depending on the institution’s requirements. Small systems have a collector size of 10 m² (7 kWth); larger systems up to 500m² (350 kWth).[21]

System requirements depends on:

  • quantity of hot water
  • timeframe (when it is needed) and
  • desired temperature

Social institutions need to assess their own requirements to determine the best system size for  their needs (e.g.: how big must the system be for a hospital, for a school? How many liters of water can usually be heated?). The institution’s financial means must also be assessed along with: the initial costs? for the system, what the payback time will be and whether there is a financing option available?

Potential savings and the respective energy costs depend on three main aspects:

  • the initial cost of the system,
  • the lifetime of the system and
  • system performance

These factors are contingent  upon the location (affected by climate, insulation, taxes, cost of living, etc.) and quality of the system (which influences performance, lifetime and cost). This can vary significantly from country to country, as well as system to system.

In contrast to households systems that use thermosiphon passive systems, SWH for social institutions are most commonly use mostly active, pumped, indirect systems. Initial investment costs range between 850 to 2400 USD/kWth (765 to 2160 EUR/kWth) with running energy costs between 10 and 29.5 USD cents/kWhth (9.5 to 26.6 EUR cents/kWhth) in central and northern Europe.[21]

Lessons learnt from a project in Bolivia Energía para infraestructura social (energy for social infrastructure):

  • Communities faced technical difficulties to provide portable water and infrastructure at the beginning, then overcame them and improved the situation and learning environment for their students.
  • The participation of teachers as well as parents in teaching about hot water usage was of utmost importance for the efficient usage and sustainability of the solar thermal systems installed.
  • Communities that installed thermal solar systems in "health points" (areas used for medical treatments) supported an improvement in hygiene and health standards of the personnel and the patients.[22]

Find more information for social institutions:

►Go to Top

Productive Use of Solar Water Heating

Heating water is a small but essential element of a wide range of production processes in agricultural, industrial and service sectors. Hot water is needed, for example, in restaurants for cooking and cleaning, in industrial processes for dissolving substances or cleaning equipment (e.g. dairies), in hotels for hot showers, etc. Productive use applications of solar water heaters arise in various industries, notably in the food service and hotel industries. Reliable and sufficient availability of hot water usually implies higher and cleaner service quality, which allows restaurants and hotels to attract more clients or increase their prices.[23]

Companies consider the following aspects before acquiring a SWH:

  • System sizes (e.g.: how big must the system be for a small Hotel? How many liters of water can usually be heated?) and
  • Costs / payback time

the construction of locally produced solar water heaters is inexpensive and the devices are simple to maintain and to repair. In comparison, the investments for industrial produced solar water heaters are often higher, but generally show good efficiency values.[23]

In Tunisia, the programme PROsol has provided SWH to 450 companies in the tertiary sector (hotels, swimming pools, hammams, etc.) via loans. It grants five years to pay back the loan through their monthly STEG electricity bill, which is a key success factor of the financial scheme, because it is a relatively reliable method of refinancing the thousands of loans.[24][25]

Example: Hotel in Peru

The Colca River Hotel in Chivay, capital of Caylloma province in the department of Arequipa installed a SWH on their roof. “The water heater works perfectly. We installed it on the roof and all went well. We have 18 rooms, all with hot water, because from the beginning we had decided to have hot water. If we are working with tourism, we have to provide hot water. There are over 100 hotels in Chivay, for all tastes and prices, and most already have hot water”, says Israel Huaraya, the owner. They opted for the largest heater, which is 650 liters and are therefore able to offer hot water to large groups with up to 40 people.

Chivay Solar Water Heater in Arequipa, PERU.JPG

►Go to Top






Global Market Trends for Solar Water Heaters

The use of solar energy to generate heat is a well-established technology that has been used for decades.[26]

Some countries have a higher degree of SWH market penetration due to favourable external factors. Some of these include:

  1. high to extremely highenergy costs (USD 0.20 to 0 .60 per kWhth),
  2. high solar irradiance is excellent (H global- horiz > 4.5 kWh/m 2 -day), and
  3. sufficient government support (e.g. subsidies to consumers or manufacturers, mandates, or technology promotion).[27]

For example, market penetration is at 90% in residential homes in Cyprus and Israel which can be at least partially be attributed to the establishment of SWH mandates since the 1980s. Another important example is China which has the largest market is and the biggest share of newly installed capacity (around 80% of recently installed capacity globally).[12] The markets in Sub-Saharan Africa, Latin America, the MENA region and other regions within Asia (excl. China) are comparably small  (see figure below).

Figure: World market for SWH of flat plate and evacuated tube collectors from 2000 to 2010.[28]

SWH worldmarket World Energy Council 2013.png

Because many countries have opted for policies and financial instruments to make SWH more affordable to households, social institutions and companies, global adoption of SWH has increased by an average of 25% annually between 2000-2010. The dip observed in the graph was deemed to be due to the 2009 global financial crisis. Although the graph only shows the SWH market until 2010, markets in Europe and China were found to be contracting with the SWH market only rising by 6% in 2015.[28]

The global capacity of SWH is 435 GWth in 2015.[29]

Figure: Capacity of solar water collectors, 2005-2015 (REN21, 2016)

SWH Solar water collectors capacity, 2005-2015, REN21 2016.png

The highest capacity of SWH was installed in China, Turkey, Brazil, India and the United States. While Chinese and European experiences demonstrated a slower market development than in the past, Denmark, Israel, Mexico, Poland and Turkey reported significant growth in 2015, according to the Global Status Report 2016 by REN21. [29]

Most of the system installed are passive thermosyphon SWH (90%), while only 10% are active, pumped SWH.[6]

Figure: Distribution by type of system (passive vs. active) for the new installed collector capacity in 2014.[6]

Figure: Distribution by type of system (passive vs. active) for the new installed collector capacity in 2014. IEA 2016


►Go to Top




Market Barriers and Limitations

The barriers that prevent faster dissemination of SWHs are listed below:[30][14][5][12]

  • Economic/financial barriers
    • Relative high upfront costs of SWH is a major limitation in their uptake. See costs
  • Demand side and social barriers
    • Lack of awareness at end-user level
    • Pervasive inertia on the part of most residential users to switch from conventional heating and cooling systems that provide a reliable supply
  • Supply side and technical barriers
    • Lack of skills of installers
    • Water quality: solar water heaters require clean, non-hard water for long term operation. Hard or dirty water leads to blockage and corrosion of pipes and storage tanks. Closed circuit systems are recommended in regions where the water is hard.
    • Quality of housing: rooftops need to be strong enough for heavy water tanks and collectors.
    • Installation, commissioning and maintenance: improper installation and commissioning and maintenance of SWHs are the leading causes of system failures. Lack of local manufacturing,
    • Lack of knowledge and SWH capabilities among architects and other decision makers within the construction and energy industries.
  • Institutional and legislative barriers
    • Lack of appropriate regulatory frameworks to guarantee that SWH meet the technical requirements to ensure appropriate and reliable operation
    • Lacking standards, and quality control: with increasing local manufacturing as well as international trade of SWH, international performance standards for SWH will be important to ensure continued deployment.
  • Research and development challenges


►Go to Top

Impacts and Benefits of Solar Water Heaters

Solar water heaters have several impacts and benefits, especially in developing countries.

Some of these economic, political and environmental benefits are listed below:[16][31][32]

  • Potential savings in energy costs for households, social institutions and companies
  • Potential savings in energy generation costs for utilities: 100 SWH with 100 litres capacity save 1 MW during peak load. If all 100 million electric water heaters of the USA replaced by solar water heaters, the peak load would be reduced by approximately 100 GW[28].
  • Creation of local jobs related to the manufacturing, commercialization, installation and maintenance of solar thermal systems
  • Reduction of fuel consumption: a 100 litres SWH can save up to 1500 units of electricity annually.
  • Possibility of improving energy security by reducing energy imports
  • Reduction of CO2 emissions: a 100 litres SWH can prevent 1.5 tCO2/year or around 350 kg of CO2 can be saved by a SWH system with 4 m² (2.8 kWth) household size. Larger systems with a collector of 20 m² (14 kWth) could save approximately 1.75 Mt CO2.

►Go to Top



Political Environment for SWH

Policies

Government support for SWH systems for low-income families and social housing projects has increased significantly in recent years.[33] This support has resulted in several key policies and programmes, including:

  • Incentive programmes that reduce high upfront costs, thereby increasing SWH access. Incentive programmes can comprise of different mechanisms, including: upfront rebates, performance-based incentives (PBIs), and hybrid incentive structures
  • Providing financing for innovative business models that reduce high upfront costs. This may include: low-interest lending programs, utility on-bill programs, and innovative contractor business models
  • SWH mandates and regulations that address landlord-tenant barriers and low customer awareness of SWH.
  • Training, quality control and certification programmes that increase skilled labour and SWH quality. Outreach and education programmes also fall under this category and were found to be important in generating awareness and communicating the SWH benefits.[34]

Although these policies and programmes are increasing in popularity, the limited number is resulting in slow market growth and missed opportunities for many cities in developing countries.[35]

On an international scale, renewable heating targets were included in the INDCs submitted to the UNFCCC by Bosnia, Malawi, Herzegovina and Jordan. At least 21 countries also have mandates for renewable heating and cooling technologies. However, fiscal incentives for renewable heating and cooling mechanisms still remain the primary method of support due to regulatory policy being a relatively slow process.

The following NAMAs have a direct focus on SWH:

Regulatory framework descriptions for a selection of countries:

  • United Arab Emirates Solar water heating regulation (since 2011): the emirate of Dubai requires new buildings to meet 75% of their water heating requirements by solar power. In case a swimming pool is included in the building footprint, 50% of its water heating requirements must be met by solar power. Source: IEA database
  • Burkina Faso Law of finance 2013 relative to the deletion of customs charges and value-added tax on solar energy equipment and material . Source: IEA database
  • Kenya Solar water heating regulations (since 2012): These target premises with hot water requirements above 100 litres: new buildings with hot water requirements of over 100 litres will have to install solar heating systems while the existing ones have 5 years to install and use solar heating systems that cover at least 60% of their hot water demand. Source: IEA database
  • El Salvador: Master Plan for Renewable Energy Development (2012-2026): target of 200 MW of new installed capacity of solar thermal energy until 2026. Source: IEA database
  • Uruguay Solar Thermal Energy Plan (since 2012): The plan grants incentives to households and businesses that buy SWH through credit; electricity bill gets discounts. It was designed and implemented by the state-owned generation and transmission UTE. Source: IEA database
  • Uruguay Solar Thermal Energy (since 2011) The decree regulates some obligations on health care centres, hotels, sports clubs and public buildings for water heating, on a progressive basis. The decree also establishes some tax exemptions for the acquisition of solar panels. Source: IEA database
  • Chile Regulatory Framework for Solar Water Thermal. A tax rebate programme for solar water heater (SWH) constructors. Source: IEA database
  • Brazil Brazil National Climate Change Plan (since 2008): refers to the residential sector and seeks to stimulate the use of solar water heaters. Source: IEA database

Standards and Quality Aspects

The quality of industrial solar water heaters and services: for maintenance, replacement and repair vary greatly. This is due to a number of reasons, including:

  • A lack of certified and trained practitioners: although SWH are often imported, the onsite installation of the systems is often relatively complex and requires trained professionals. Unfortunately, these trained professionals are often non-existent (particularly in rural regions). This can result in a less efficient system being installed.
  • A lack of standardisation enforcement: The dispersed nature of SWH manufacturing has thus far hampered the enforcement of standardisation. In most countries, the SWH market is dominated by hundreds to thousands of small- and medium-size enterprises with only a small number of multinational enterprises.[36] Tracking and enforcing standardisation on all of these operations is therefore difficult.
  • Transportation of standardized components: GIZ experience from Tajikistan showed that the import of glass vacuum solar water heaters from China was not feasible as a high percentage of glass pipes break during the transport resulting in difficulties in ordering spare pipes and solar water heater installation problems in rural settings.[37] This indicates that although the equipment may be standardized, it could still result in difficulties and subsequently other, non-standardized, material being used.


►Go to Top

Actors in the Field of SWH

Companies/Technology Providers

According to DENA, Germany is the global leader for quality products with German solar thermal energy companies having many years of comprehensive experience in producing, planning and building solar heating systems and their components.[38]

China is a primary manufacturer and installer of SWH with over 5,000 small- and medium scale companies (only 10 of them opperate at a larger scale).[39] However, most of them are small and rural with no product quality control.[27] Moreover, the Chinese SWH market has been predominately in rural areas and is characterised by inexpensive SWH, The substantial government support to consumers and to manufacturers is reflected in the high energy cost relative to income and highly intermittent or non-existent conventional energy supplies.[27][40]

India has over 100 approved SWH manufacturers (60 for flat plate collectors and 44 for evacuated tube collectors).[27]

Mexico’s association lists 14 SWH providers on their homepage.

Some of the bigger US companies operate worldwide:

  • Solahart: In 80+ countries with an average system life expectancy: 19.2 years
  • Silicon Solar: has multi-national offices to serve emerging markets and developing nations around the world (NY, Philippines, China, India); Price: 400-1,250 USD[41]
  • Rheem: has several international offices (also Latin America, Middle East)

Among the 40 companies mentioned in this article from 2014, there are 6 explicitly mentioned in providing solar water heaters. All are Zayed Future Energy Prize finalists and winners.

  • India: Orb Energy was a 2012 Zayed Future Energy Prize finalist in the SME & NGO category (those two categories were combined back in 2012). It serves the Indian market. It sells, installs, and services solar hot water systems, next to solar PV systems, solar lighting, and solar-powered air conditioning.
  • India: Barefoot College shows again that innovation isn’t over. Its story is worth a read. And its work is much broader than the solar solutions it provides, but since this article is about solar power, the reason Barefoot College is on the list is because it provides solar water heaters to those living in rural India.
  • India: ONergy, yet another India-based social enterprise, has been providing solar water heating systems and others to underserved households and institutions in India since 2009.
  • India: Waaree is an Indian manufacturer of solar modules, but it also provides services for solar hot water systems, and distributes other solar products.
  • Afghanistan: The solar company, Zularistan offers solar water heaters, among other solar technologies.
  • Togo: Mono Eco Green Energy is based in Togo and serves Togo as well as other African countries. It sells and installs solar hot water heaters, and other solar technologies.


►Go to Top

Research Institutes

Global Energy Network Institute (GENI):

Asia

Africa

MENA

  • The Solar Heating Arab Mark and Certification Initiative (SHAMCI) is a quality certification scheme for the production of solar thermal products and services in the Arab region. SHAMCI is the first Arab certification scheme for solar thermal products. It is built around specific characteristics and needs of Arab states in the Middle East and North Africa. SHAMCI is inspired by Solar Keymark, the European certification scheme.

USA

Solar Energy Research Institute (SERI), Malaysia


►Go to Top

Certification

  • Global Solar Certification Network: http://www.gscn.solar/: The “Global Solar Certification Network” is a cooperation between solar certification bodies/schemes around the world. When a product has been certified by one of the participating certification bodies/schemes, the product can obtain certification from other participating certification schemes without re-testing of the product and without re-inspection of production facilities.
  • Europe: The Solar Keymark (European certification scheme) and European Solar Thermal Industry Federation: ESTIF
  • North America: SRCC, IAPMO, CSA
  • Asia: Golden Sun
  • Africa: SHAMCI
  • Latin America and Caribbean: no information


►Go to Top


National and International Organisations, NGOs

International Energy Agency

The Solar Heating and Cooling Programme (SHC) was established in 1977, as one of the first programmes of the International Energy Agency, to promote the use of all aspects of solar thermal energy.

National and Regional Associations and Organisations

►Go to Top

NGOs

►Go to Top





Further information

►Go to Top;


References

  1. Ashok Gadgil et al., ‘Domestic Solar Water Heater for Developing Countries’, Http://Energy. Lbl. Gov/Staff/Gadgil/Docs/2007/Solar-Water-Heater-Rpt. Pdf. Accessed on 6, no. 04 (2007): 2013.
  2. David Elizinga et al., ‘ADVANTAGE ENERGY Emerging Economies, Developing Countries and the Private-Public Sector Interface’ (Internationale Energy Agency, 2011), http://www.iea.org/publications/freepublications/publication/advantage_energy.pdf.
  3. Amy Punter, ‘Solar Thermal Energy Application Heating,cooling, Crop Drying - Practical Answers’, 2007, http://answers.practicalaction.org/our-resources/item/solar-thermal-energy.
  4. 4.0 4.1 GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology
  5. 5.0 5.1 5.2 UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries Cite error: Invalid <ref> tag; name "UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf" defined multiple times with different content Cite error: Invalid <ref> tag; name "UNEP (2015): Solar Water Heating, a Strategic Planning Guide for Cities in Developing Countries http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf" defined multiple times with different content
  6. 6.0 6.1 6.2 6.3 6.4 Mauthner, Franz, Werner Weiss, and Monika Spörk-Dür. ‘Solar Heat Worldwide. Markets and Contribution to the Energy Supply’. Internationale Energy Agency, 2016. https://www.iea-shc.org/data/sites/1/publications/Solar-Heat-Worldwide-2016.pdf.
  7. Ray Holland, ‘Solar Water Heaters: Hot Water for Washing and Heating - Practical Answers’, 1988, http://answers.practicalaction.org/our-resources/item/solar-water-heating.
  8. Deutsche Energie-Agentur GmbH (dena), ‘Solar Thermal Energy Technologies and Applications’, 17 December 2014, http://www.renewables-made-in-germany.com/en/renewables-made-in-germany/technologies/solar-thermal-energy/solar-thermal-energy/technologies-and-applications.html.
  9. 9.0 9.1 Jean Cariou and Peter Meisen, ‘Solar Water Heater’, Global Energy Network Institute, 2010, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/solar-water-heater.pdf.
  10. https://energy.gov/energysaver/estimating-cost-and-energy-efficiency-solar-water-heater
  11. International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl.
  12. 12.0 12.1 12.2 12.3 12.4 International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’.
  13. http://www.iea-shc.org/country-report-ghana
  14. 14.0 14.1 GTZ (2007): Eastern Africa Resource Base: GTZ Online Regional Energy Resource Base: Regional and Country Specific Energy Resource Database: I - Energy Technology
  15. US Department of Energy, ‘A Consumer’s Guide HeatYourWaterwiththeSun’, 2003, http://solarteknologies.com/pdfs/brochures/water_heat_guide.pdf.
  16. 16.0 16.1 Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Single Family Houses’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.
  17. SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’ (Energy, water and sanitation authority, Kigali, Rwanda), accessed 16 March 2017, http://www.reg.rw/images/pdf/Article%20on%20SWH.pdf.
  18. Ashok Gadgil et al., ‘Solar Water Heater Project’, 2009, http://www.solarthermalworld.org/sites/gstec/files/story/2015-06-21/swh-rpt-2009.pdf.
  19. Source?
  20. http://www.iea-shc.org
  21. 21.0 21.1 Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’, 2015, http://www.solarthermalworld.org/sites/gstec/files/story/2015-10-14/application_factsheet_swh_social_amenities.pdf.
  22. http://endev-bolivia.org/images/stories/proyecto_endev/infraestructura/Descargas/Difusion/lecsaprendidas.pdf
  23. 23.0 23.1 Anna Brüderle, Johanna Hartmann, and Katja Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’ (Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH - Programme - Poverty-oriented Basic Energy Services (HERA) and European Union Energy Initiative Partnership Dialogue Facility (EUEI PD, 2014), https://energypedia.info/images/2/24/Productive_Use_of_Thermal_Energy_Overview.pdf.
  24. http://www.solarthermalworld.org/content/tunisia-government-extends-prosol-support-scheme
  25. https://climatepolicyinitiative.org/publication/san-giorgio-group-case-study-prosol/
  26. Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.
  27. 27.0 27.1 27.2 27.3 Trudy Forsyth et al., ‘Quality Infrastructure for Renewable Energy Technologies: Solar Water Heaters’ (International Renewable Energy Agency (IRENA), 2015), http://www.irena.org/DocumentDownloads/Publications/IRENA_QI_3_SWH_2015.pdf.
  28. 28.0 28.1 28.2 Alessandro Clerici and World Energy Council, World Energy Resources. 2013 Survey (London: World Energy Council, 2013).
  29. 29.0 29.1 Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf.
  30. Kordab, Mohamad (2009): Solar Water Heaters Development In MENA Region, Solar Thermal Application in Egypt, Palestine, Lebanon, Syriaq and Jordan: Technical Aspects, Framework conditions, and private Sector NeedsfckLRThis is a presentation from Dr. Kordab (Energy Expert of the Damascus University) during the “Solar Thermal Applications workshop” held in Syria. The event was jointly organized by the Regional Center for Renewable Energy and Energy Efficiency (RCREEE), regional organizations from Syria and Egypt and the German Development Cooperation (GTZ). Available at http://www.solarthermalworld.org/taxonomy/term/22121.
  31. SolaRwanda program, ‘Introduction to Solar Water Heaters. Frequently Asked Questions on Solar Water Heaters’.
  32. Global Solar Water Heating Market Transformation and Strengthening Initiative (GSWH Project, ‘Solar Heating and Cooling Application Factsheet: Domestic Water Heaters for Social Amenities’.
  33. International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://bit.ly/2nW44Sl
  34. Pedro Dias and Amr Abdelhai, ‘SOLAR WATER HEATING. A STRATEGIC PLANNING GUIDE FOR CITIES IN DEVELOPING COUNTRIES’, 2015, http://www.estif.org/fileadmin/estif/content/publications/downloads/UNEP_2015/unep_report_cities_lr.pdf.
  35. Janet L. Sawin, et al., ‘RENEWABLES 2016. GLOBAL STATUS REPORT. Key Findings 2016’ (REN21, 2016), http://www.ren21.net/wp-content/uploads/2016/06/GSR_2016_KeyFindings1.pdf
  36. International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf
  37. Anna Brüderle, Johanna Hartmann, and Katja Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’ (Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH - Programme - Poverty-oriented Basic Energy Services (HERA) and European Union Energy Initiative Partnership Dialogue Facility (EUEI PD, 2014), https://energypedia.info/images/2/24/Productive_Use_of_Thermal_Energy_Overview.pdf.Brüderle, Hartmann, and Diembeck, ‘Productive Use of Thermal Energy An Overview of Technology Options and Approaches for Promotion’.
  38. Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’, 2013, http://www.renewables-made-in-germany.com/fileadmin/user_upload/Auslandsmarketing/Offgrid_2013_131020.pdf.Deutsche Energie-Agentur GmbH (dena), ‘Renewable Energy Solutions for Off-Grid Applications. Providing Electric Power and Heat for Regions without Grid Power or Connected to a Weak Grid’
  39. International Renewable Energy Agency (IRENA) and Energy Technology Systems Analysis Programme (ETSAP, ‘Solar Heating and Cooling for Residential Applications | Technology Brief’, 2015, http://www.irena.org/DocumentDownloads/Publications/IRENA_ETSAP_Tech_Brief_R12_Solar_Thermal_Residential_2015.pdf.
  40. Bennu Solar customizes, brand, and mass produce solar products and appliances for use in rural Africa. Headquartered in Hong Kong, and with three warehouses hubs throughout China, they offer a supply chain solution for solar businesses which operate in Africa. Since 2009, they serve clients to deliver solar products into over 30 developing countries.
  41. http://www.siliconsolar.com/shop/solar-store/solar-hot-water-heaters/thermosyphon-solar-hot-water/


►Go to Top