Urban Transport and Energy Efficiency

►Back to Mobility Portal

Overview

This article has been adapted from the GIZ Sourcebook on Urban Transport and Energy Efficiency.

Transport – Its Contribution to Global Energy Demand

Average annual worldwide primary energy demand is projected to increase by 1.5% by 2030. This would lead to an overall increase in energy demand of 40% between 2007 and 2030. Fossil fuels will remain the primary source of energy worldwide, while the share of renewables will only increase slowly. The different sectors of end use (transport, industry, households, services, agriculture and non-energy uses) will drive the growth in demand in different ways, but transport will remain the single largest final energy consuming sector.

Road transport consumes approximately 70% of the energy used in the global transport system. Road passenger transport alone accounts for 50% of this energy consumption. The global transport energy use has grown steadily in recent decades. From 1971 to 2006, energy consumption in the transport sector rose between 2.0 and 2.5% annually. The road transport sector uses the most energy, followed by aviation. Whereas in industrialised countries energy consumption has now stabilised at a high or slightly declining level, the growth rate of transport energy consumption in non-OECD countries between 2000 and 2006 was 4.3%, and that rate will continue to grow.

Energy-efficient transport offers huge potential for reducing the demand both for oil and for energy in general. The International Energy Agency (IEA) estimates that advanced technologies and alternative fuels (hybrid vehicles, electric vehicles and fuel-cell vehicles) can reduce the energy intensity of transport by 20 to 40% by 2050, compared to its own Reference Scenario. Such achievements could also halve the need for fossil fuels. However, even if the energy intensity is reduced total energy demand is still likely to rise above current levels due to the overall increase in demand for transport and motorisation. To cut future demand from the current levels, it is necessary not only that we shift to more efficient modes of transport, but also that we reduce the overall per capita demand for travel.

►Go to Top

Increasing Energy Efficiency in the Transport Sector

Energy-efficient transportation needs to be encouraged on three different levels: system efficiency, travel efficiency and vehicle efficiency. Corresponding to these three levels of energy efficiency in transport, three basis strategies exist to improve energy efficiency:

• Avoiding increased transport activity and reducing the current demand for transport;
• Shifting demand to more efficient modes of transport;
• Improving the vehicles and fuels used.

Increasing Energy Efficiency in the Transport Sector (S. Boehler-Baedeker, Hueging H. 2012, Urban Transport and Energy Efficiency, Eschborn, Germany)

►Go to Top

System Efficiency – The Avoid/Reduce Strategy

System efficiency relates to how the demand for transport (and the different modes of transport) is generated. Research has shown that infrastructure and city structures influence transport demand. Energy consumption per capita rises proportionally as city density falls. The reduction of traffic volume is a crucial aspect of energy-efficient transport. Land-use planning should therefore optimise the positioning of settlement and production structures to avoid traffic or to reduce travel distances. A dense urban structure with mixed uses is essential for high system efficiency, because it involves shorter travel distances and a modal shift from road transport (which consumes an enormous amount of space) to more efficient transport modes such as walking, cycling and public transport. The prerequisites for system efficiency do not only include a dense city system, but also proper management of the demand for transport and an adequate public transport network.

Freight transport also benefits from dense city structures with short distances. Combining residential and commercial areas reduces the transportation of private goods. The challenge, however, is to ensure there is sufficient space and high-quality infrastructure for modern industry. One possible solution is to locate a dense, suburban industrial area close to a freight consolidation centre. Outgoing and incoming freight is therefore organised and freight transport efficiency can be improved. Moreover, the bundling of deliveries to the city centre minimises pollution and noise.

►Go to Top

Travel Efficiency – The Shift Strategy

Travel efficiency relates to the energy consumption of different modes of transport. The main parameters of travel efficiency are the relative preponderance of the different transport modes (modal split) and the load factor of the vehicles. An effective way of enhancing energy efficiency is to encourage travellers or shippers to use more efficient forms of transport, such as public transport and non-motorised vehicles.

Especially in urban areas, most journeys involve distances of below five kilometres. A variety of measures can be implemented to encourage citizens to travel such distances by bike or on foot. For longer journeys, public transport provides an alternative to the automobile. Increasing the share of public transport will lead to higher rates of occupancy in buses and trains, which will further increase their energy efficiency.

Besides passenger transport, energy efficiency also needs to be increased in freight transport. Rail freight is particularly energy efficient because of the high load factor; its flexibility is, of course, limited. A sophisticated logistic network, including multimodal logistics centres can help to shift freight to more efficient modes of transport.

►Go to Top

Vehicle Efficiency – The Improve Strategy

Reducing the per-kilometre fuel consumption of vehicles increases their efficiency. This can be done with technology and design improvements, but also through efficient driving techniques. Measures can be clustered into three categories:

• Improvement of existing vehicles;
• New fuel concepts;
• Development of new car concepts.

The strategy of improvement is not only relevant for private cars, but also for freight and public transport. Specific measures for passenger cars include the use of lightweight materials, downsizing (reducing the volume of the engine and size of the car) and/or using hybrid engines. Such technological improvements are mainly a job for vehicle manufacturers and research institutes. However, legislation and fiscal measures can be important drivers of technological advances. Local authorities can support the diffusion of efficiency technologies in the market by setting standards, raising awareness and creating incentives for consumers to buy more energy efficient vehicles.

►Go to Top

Energy Efficiency Policies and Measures

Local Authorities

The city government and associated institutions are responsible for spatial and urban planning, which determines the shape of the city. Strategic plans are developed for the road and rail networks and for the settlement structures. They are therefore the key actors in developing long-term strategies or master plans for greater energy efficiency. With the right incentives the use of highly energy-efficient modes of transport could be expanded and their attractiveness enhanced. Wrong incentives, which promote the use of private motorised vehicles, must be reduced. It is important that non-efficient modes of transport become less convenient to use throughout the entire urban structure.

The political will for change and strong leadership are crucial, as is the continuity of political decision making, even beyond legislative periods. Mayors and city governments have to set the overall agenda. They outline quantitative and qualitative targets, and they establish and promote common objectives that reach beyond the local government and administration. The media and the public are important stakeholders in this context.

Mayors and city governments should ensure that their local energy efficiency concepts not only solve their particular urban development problems, but also provide multiple benefits:

• Better transportation system and more comfortable forms of travel;
• Reductions in air pollution and noise, with a positive impact on human health and city liveability;
• Reduction of environmental damage, both locally and on a global scale;
• Reduction of urban sprawl by promoting dense structures and mixed land use;
• Increased competitiveness and attractiveness of the city (including for foreign investors), which attracts companies and highly qualified employees;
• Additional revenue for the city that could be invested in new transport infrastructure and contribute to the reduction of external transport costs.

It is important for a city government to maintain a holistic view of its energy efficiency measures, and that it identifies and solves any conflicts that arise between different divisions. It can be helpful to establish a multidisciplinary organisational unit or to launch thematic working groups.

City councils can encourage more efficient transport through the way they manage their won municipal mobility. Similar to a private enterprise, a municipality can improve its own efficiency with the following measures:

• Municipal mobility management;
• Green procurement policy for municipal vehicles;
• Eco-driving training for municipal employees.

Thus, city administrations can serve as role models for the use of cleaner technologies, and they can encourage private companies in the city to follow their example.

►Go to Top

Local Companies and Organisations

The private sector is highly significant, and city authorities need to be in close contact with local companies. If the local public transport system is operated by private companies, it is essential that the city authorities cooperate closely with them.

Local NGOs are also key actors, since they can exert political pressure and put energy efficiency measures on the agenda.

In many cities, urban rail and bus systems are run by different operators. Uncoordinated networks and schedules lead to long waiting times for passengers transferring from one mode of transport to another. Different fare systems force users to buy separate tickets for each leg of their journey. To address such shortcomings, the various local operators can be encouraged to cooperate in a single public transport network. To help users find their way, improved passenger information could be made available at stations and inside vehicles. In addition, a common ticketing system could be implemented. Integrating services requires greater planning and communication among the operators, but it attracts new customers.

Non-governmental organisations (NGOs) can play an important role in adjusting services and infrastructure to the needs of the users, if local administrations involve them in the decision making process. Transport and environmental organisations, for instance, can contribute to strategy formulation. Participation increases public acceptance, and at the same time imparts in-depth knowledge of people’s needs. Customer user groups can identify weakness in the local transport system, e.g. barriers to cycling and walking in the existing infrastructure. It can be useful to cooperate with NGOs when organising campaigns such as bike-to-work programmes, community cycling events or car-free days. Other NGO-based campaigns might include awareness raining activities to inform the public about the advantages of energy-efficient modes of transport.

►Go to Top

National Governments

National governments play an important role in urban transport. For the countrywide establishment of energy-efficient transport, national governments have to create favourable conditions and support local initiatives. The commitment of national governments is essential, because it is the national strategies, programmes and legislation that underpin local policies. National authorities can influence local budgets for the transport system. They administer national taxes and decide on the disbursement of grants and subsidies to local government, and they are usually also responsible for supporting research and development, and pilot projects. Furthermore, national taxation schemes or financial incentives can influence how citizens choose their means of transport. Fuel prices, which are regulated by the national government, shape the country’s transport structure. If the national government subsidies fuel or does not implement proper fuel taxation, private motorised vehicles will dominate the transport system and in many cases the government will lack the necessary financial resources to provide a high quality transport infrastructure.

►Go to Top

Policy Packages for Energy-Efficient Urban Transport – Exploiting Synergies

A proper policy to enhance energy efficiency in the urban transport system must address all three levels of energy-efficient transport: system efficiency, travel and vehicle efficiency. Strategies and policy packages deliver that kind of mixed approach. Ideally, positive incentives (‘pull’ measures) need to be supported by disincentives (‘push’ measures). A well developed and convenient public transport infrastructure can attract more passengers, but that is often not enough, in itself, to inspire a major shift from private car use to public transport. Therefore, steps have to be taken to overcome these factors, such as pricing measures that increase the cost of car use, or parking restrictions that reduce the convenience. These steps will prompt a more rapid shift towards energy-efficient modes of transport.

►Go to Top

Conclusion – The Path to an Energy-Efficient Transport System

A wide variety of potential policies and measures exists to increase energy efficiency in local transport. In order to achieve the maximum benefits, there is a need to coordinate the various political levels and actors. It is also necessary to bundle these measures into comprehensive packages. In many regions, institutional, economic and social barriers inhibit the use of certain instruments. Political decision makers and other key actors need to consider these obstacles in order to identify a path to sustainable and energy-efficient transport.

►Go to Top

Further Information

• Further and more detailed information can be found on the homepage of the Sustainable Urban Transport Project. The Sustainable Urban Transport Project aims to help developing world cities achieve their sustainable transport goals, through the dissemination of information about international experience, policy advice, training and capacity building.

►Go to Top