Difference between revisions of "Energy for Agriculture"
***** (***** | *****) m |
***** (***** | *****) m |
||
| (21 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
| + | = Overview<br/> = | ||
| − | |||
Modern agriculture needs modern energy - the two are closely linked. For many developing countries, agriculture is the dominant sector in developing the economy. Increasing productivity and the modernisation of agricultural production systems are the primary drivers of global poverty reduction and energy plays a key role in achieving this. Energy input to modern and sustainable agricultural production and processing systems is a key factor in moving beyond subsistence farming towards food security, added value in rural areas and expansion into new agricultural markets. In many cases, renewable energy technologies and hybrid systems can provide energy services that neatly support the production process, e.g. by providing irrigation (pumps) or post harvest treatment (cooling) or processing (drying, milling, pressing). The requirements of mechanical energy in the agricultural production process are also of critical importance and include human and animal labour as well as fuels for mechanisation, pumping and other activities, and indirectly the production of fertilisers and agrochemicals.<br/><u>The agricultural production chain involves the following steps:</u> | Modern agriculture needs modern energy - the two are closely linked. For many developing countries, agriculture is the dominant sector in developing the economy. Increasing productivity and the modernisation of agricultural production systems are the primary drivers of global poverty reduction and energy plays a key role in achieving this. Energy input to modern and sustainable agricultural production and processing systems is a key factor in moving beyond subsistence farming towards food security, added value in rural areas and expansion into new agricultural markets. In many cases, renewable energy technologies and hybrid systems can provide energy services that neatly support the production process, e.g. by providing irrigation (pumps) or post harvest treatment (cooling) or processing (drying, milling, pressing). The requirements of mechanical energy in the agricultural production process are also of critical importance and include human and animal labour as well as fuels for mechanisation, pumping and other activities, and indirectly the production of fertilisers and agrochemicals.<br/><u>The agricultural production chain involves the following steps:</u> | ||
| + | |||
*[[Energy for Agriculture#Production|Production]] | *[[Energy for Agriculture#Production|Production]] | ||
*[[Energy for Agriculture#Post-harvest and Storage|Postharvest and storage]] | *[[Energy for Agriculture#Post-harvest and Storage|Postharvest and storage]] | ||
*[[Energy for Agriculture#Processing|Processing]] | *[[Energy for Agriculture#Processing|Processing]] | ||
*[[Energy for Agriculture#Commercialisation|Commercialisation]] | *[[Energy for Agriculture#Commercialisation|Commercialisation]] | ||
| + | |||
| + | <br/> | ||
| + | |||
| + | The FAO Study "[[Opportunities for Agri-Food Chains to become Energy-Smart|Opportunities for Agri-Food Chains to become Energy-Smart]]" examined the energy demand and sustainable alternatives for the value chains of milk, rice and vegetables.<br/> | ||
| + | |||
<br/> | <br/> | ||
| + | |||
= Production<br/> = | = Production<br/> = | ||
== Land Preparation, Cultivation, Harvesting and Threshing<br/> == | == Land Preparation, Cultivation, Harvesting and Threshing<br/> == | ||
| − | The power necessary for agricultural production is provided by human labour, draught animals or engine-driven machinery. Mechanisation is a key input in any farming system applying tools, implements and machinery to improve the productivity of farm labour and land. Based on the power source, the technological levels of mechanisation have been broadly classified as hand-tool technology, draught animal technology and mechanical power technology.<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref><br/>The bulk of direct energy inputs in smallholder production is provided by human and '''draught animal power (DAP)'''. Agriculture in developing countries relies heavily on the physical capability of farmers, with often limited output, depending on the physical energy available. A fit person consumes around 250-300 W in terms of energy, depending on climate and with a rest of 10-30 minutes/hour. The efficiency of energy conversion is only 25 per cent, with a maximum power output of 75 W. Operations involving human skill include activities such as planting, weeding, spraying and harvesting and using hand tools. Most horticultural commodities are harvested manually, including those grown in highly industrialised nations. Energy requirements during harvesting include mechanical energy for digging up root and tuber crops. For example, a simple, labour-saving cassava harvesting tool was introduced to Thai farmers by the '''International Centre for Tropical Agriculture (CIAT)''' reducing person-days from 15-40 (depending on the type of soil and the yield) to 5-10 days only. The tool costs 2.50 USD, is produced by local manufacturers and can be used collectively by farmers.<ref name="Appropriate Technology (2010), Vol 37, No 2., page 66-67, www.appropriate-technolog.org/www.ciat.cgiar.org">Appropriate Technology (2010), Vol 37, No 2., page 66-67, www.appropriate-technolog.org/www.ciat.cgiar.org</ref> Harvesting early in the morning when air temperatures are cooler also helps to reduce energy requirements and cooling costs. Activities such as ploughing, soil preparation, water lifting, pulling inputs and threshing require fewer skills but greater energy input and are hence mostly powered by draught animals such as buffalos, horses, donkeys, camels or oxen. Power output ranges from 200 W for a donkey for 4 hours daily work to over 500 W for a buffalo<ref name="FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTML">FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTML</ref>. Draught animal power can alleviate human drudgery and is generally considered to be an affordable and sustainable source of power for smallholders, also given its great potential for diversification and expansion e.g. for transport and non-farm work. Efforts to expand the use of draught animal power should include work on animal efficiency, which can be improved through modernisation of equipment, better breeding and animal husbandry, feeding and veterinary care. In '''sub-Saharan Africa (SSA)''', human effort contributes about 65 per cent of the power required for land preparation and subsequent weeding, the principal demand peaks in the farming cycle. An example comparison shows that a typical farm family relying solely on human power can cultivate only 1.5 hectares per year. This rises to 4 hectares if animal power is available and to over 8 hectares if tractor power can be accessed.<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref> Transition to increased mechanisation of agricultural operations occurs using diesel or gasoline-powered tractors and harvesters. Fuel powered two-wheel tractors are often used for agricultural production, with different attachements for tillage, bed planting, row planting, harvesting and threshing. In Bangladesh, power tillers (12-15 hp) are used for about 70 per cent of farm work because of their versatility.<ref name="UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf">UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf</ref> The fuel requirements for digging up root and tuber crops, e.g. of a potato digger are 0.57 gallons of diesel fuel per ton of product (1.96 litres/MT).<ref name="USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref> Energy use depends mostly on the speed at which activities are carried out. As tillage operations within arable farming systems often have the highest energy requirements and lead to soil degradation, the reduction of mechanical tillage is promoted by the approach of '''conservation agriculture (CA)'''. In general, a four-wheel tractor will not be economically feasible for a smallholder with a typical land holding of up to 5 hectares. Government-run tractor hire schemes in SSA countries have not been able to increase farm productivity. On the other hand, the concept of a rental market for privately owned and operated tractors has potential that may increase in the future<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref>. Besides direct energy demand in agriculture there are also indirect energy inputs in the form of sequestered energy in fertilisers, herbicides, pesticides, and insecticides, all of which require energy in their production, distribution and transport processes. Fertilisers form the largest of these energy inputs to agriculture, whilst pesticides are the most energy-intensive agricultural input (on a per kg basis of chemical)<ref name="FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTM">FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTM</ref>. Need for these inputs however can be reduced by the use of farm-own organic manure or by agro-industry based bio-fertiliser production, e.g. generated from biogas plants (at household or industrial level). The promotion of locally produced organic fertiliser also has the advantage of avoiding the negative environmental impact of mineral fertilisers and benefits from the shorter distances required for distribution, thus reducing energy requirements and fuel costs. Past experience in Asia indicates that the key factors driving mechanisation and consequently power for agricultural development are guaranteed markets and farm prices for key crops, favorable government policies and availability of credit. The example of India shows that favorable government policy and farmer demand have led to increased availability of appropriate and locally manufactured farm machinery and ultimately to India becoming the world‘s largest tractor manufacturer.<ref name="FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.">FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.</ref> A very comprehensive comparison of Energy Use in Conventional and Organic Cropping Systems has been carried out by the '''National Sustainable Agriculture Information Service (ATTRA) '''of the US '''National Centre for Appropriate Technology (NCAT)'''. The report shows, in a review of existing studies, that there are many complexities involved in comparing energy consumption in conventional and organic cropping systems. Certain research indicates that organic agriculture is more energy-efficient than conventional agriculture, but not in all cases. In some cases, organic agriculture may be more energy-intensive, depending on the specific farming operation, the crop produced and the post-production handling. It is important to assess the energy-intensiveness of food systems in a holistic manner that incorporates energy consumption for the entire life cycle of the food product.<ref name="Hill, H. et al. (2009), Comparing Energy Use in Conventional and Organic Cropping Systems, NCAT Program, ATTRA, IP339, Slot 337, Version 051409. USA. http://attra.ncat.org/attra-pub/croppingsystems.html">Hill, H. et al. (2009), Comparing Energy Use in Conventional and Organic Cropping Systems, NCAT Program, ATTRA, IP339, Slot 337, Version 051409. USA. http://attra.ncat.org/attra-pub/croppingsystems.html</ref><br/><br/> | + | |
| − | [[Energy for Agriculture# | + | The power necessary for agricultural production is provided by human labour, draught animals or engine-driven machinery. Mechanisation is a key input in any farming system applying tools, implements and machinery to improve the productivity of farm labour and land. Based on the power source, the technological levels of mechanisation have been broadly classified as hand-tool technology, draught animal technology and mechanical power technology.<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref><br/> |
| − | == Irrigation == | + | |
| − | Access to water is a major determinant of land productivity and active water management through irrigation offers an important opportunity to stabilise yields. Irrigation is therefore of the utmost significance in the agricultural production process and this chapter is consequently accorded great importance. Irrigated land productivity is more than double that of rainfed land. In sub-Saharan Africa, only 4 per cent of the area in production is under irrigation, compared with 39 per cent in South Asia and 29 per cent in East Asia.<ref name="World Bank (2007), World Development Report 2008: Agriculture for Development. (Report 41455). http://go.worldbank.org/BVIMU1PI60">World Bank (2007), World Development Report 2008: Agriculture for Development. (Report 41455). http://go.worldbank.org/BVIMU1PI60</ref> With growing water scarcity and costs of large-scale irrigation schemes rising, there is a need to enhance productivity by improving existing schemes, expanding small-scale schemes and developing water harvesting. Irrigation‖ refers to the distribution of water for growing crops, including the use of water storage and pumping, where appropriate. The energy demand for irrigation purposes is the energy required to lift water by pumping from surface sources, such as ponds, streams, or canals; or from below-ground sources using open wells or boreholes. This water is typically pumped to surface canals, reservoirs, or elevated tanks. The energy demand for water lifting is calculated by multiplying the head (the vertical distance from the water source to the field in metres) by the volume of water to be raised in cubic metres (m<sup>3</sup>). Pumping energy needs are typically expressed in units of m<sup>4</sup>.<br/><u>Decisions about energy and irrigation should be made on the basis of three key sequential steps<ref name="most of the Irrigation chapter is based on: USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">most of the Irrigation chapter is based on: USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref>:</u> | + | <br/>The bulk of direct energy inputs in smallholder production is provided by human and '''draught animal power (DAP)'''. Agriculture in developing countries relies heavily on the physical capability of farmers, with often limited output, depending on the physical energy available. A fit person consumes around 250-300 W in terms of energy, depending on climate and with a rest of 10-30 minutes/hour. The efficiency of energy conversion is only 25 per cent, with a maximum power output of 75 W. Operations involving human skill include activities such as planting, weeding, spraying and harvesting and using hand tools. Most horticultural commodities are harvested manually, including those grown in highly industrialised nations. Energy requirements during harvesting include mechanical energy for digging up root and tuber crops. For example, a simple, labour-saving cassava harvesting tool was introduced to Thai farmers by the '''International Centre for Tropical Agriculture (CIAT)''' reducing person-days from 15-40 (depending on the type of soil and the yield) to 5-10 days only. The tool costs 2.50 USD, is produced by local manufacturers and can be used collectively by farmers.<ref name="Appropriate Technology (2010), Vol 37, No 2., page 66-67, www.appropriate-technolog.org/www.ciat.cgiar.org">Appropriate Technology (2010), Vol 37, No 2., page 66-67, www.appropriate-technolog.org/www.ciat.cgiar.org</ref> Harvesting early in the morning when air temperatures are cooler also helps to reduce energy requirements and cooling costs.<br/> |
| + | |||
| + | <br/> | ||
| + | |||
| + | Activities such as ploughing, soil preparation, water lifting, pulling inputs and threshing require fewer skills but greater energy input and are hence mostly powered by draught animals such as buffalos, horses, donkeys, camels or oxen. Power output ranges from 200 W for a donkey for 4 hours daily work to over 500 W for a buffalo<ref name="FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTML">FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTML</ref>. Draught animal power can alleviate human drudgery and is generally considered to be an affordable and sustainable source of power for smallholders, also given its great potential for diversification and expansion e.g. for transport and non-farm work. Efforts to expand the use of draught animal power should include work on animal efficiency, which can be improved through modernisation of equipment, better breeding and animal husbandry, feeding and veterinary care.<br/> | ||
| + | |||
| + | <br/> | ||
| + | |||
| + | In '''sub-Saharan Africa (SSA)''', human effort contributes about 65 per cent of the power required for land preparation and subsequent weeding, the principal demand peaks in the farming cycle. An example comparison shows that a typical farm family relying solely on human power can cultivate only 1.5 hectares per year. This rises to 4 hectares if animal power is available and to over 8 hectares if tractor power can be accessed.<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref> Transition to increased mechanisation of agricultural operations occurs using diesel or gasoline-powered tractors and harvesters. Fuel powered two-wheel tractors are often used for agricultural production, with different attachements for tillage, bed planting, row planting, harvesting and threshing. In Bangladesh, power tillers (12-15 hp) are used for about 70 per cent of farm work because of their versatility.<ref name="UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf">UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf</ref> The fuel requirements for digging up root and tuber crops, e.g. of a potato digger are 0.57 gallons of diesel fuel per ton of product (1.96 litres/MT).<ref name="USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref> Energy use depends mostly on the speed at which activities are carried out. As tillage operations within arable farming systems often have the highest energy requirements and lead to soil degradation, the reduction of mechanical tillage is promoted by the approach of '''conservation agriculture (CA)'''. In general, a four-wheel tractor will not be economically feasible for a smallholder with a typical land holding of up to 5 hectares. Government-run tractor hire schemes in SSA countries have not been able to increase farm productivity. On the other hand, the concept of a rental market for privately owned and operated tractors has potential that may increase in the future<ref name="FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.">FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.</ref>.<br/> | ||
| + | |||
| + | <br/> | ||
| + | |||
| + | Besides direct energy demand in agriculture there are also indirect energy inputs in the form of sequestered energy in fertilisers, herbicides, pesticides, and insecticides, all of which require energy in their production, distribution and transport processes. Fertilisers form the largest of these energy inputs to agriculture, whilst pesticides are the most energy-intensive agricultural input (on a per kg basis of chemical)<ref name="FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTM">FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTM</ref>. Need for these inputs however can be reduced by the use of farm-own organic manure or by agro-industry based bio-fertiliser production, e.g. generated from biogas plants (at household or industrial level). The promotion of locally produced organic fertiliser also has the advantage of avoiding the negative environmental impact of mineral fertilisers and benefits from the shorter distances required for distribution, thus reducing energy requirements and fuel costs.<br/> | ||
| + | |||
| + | <br/> | ||
| + | |||
| + | Past experience in Asia indicates that the key factors driving mechanisation and consequently power for agricultural development are guaranteed markets and farm prices for key crops, favorable government policies and availability of credit. The example of India shows that favorable government policy and farmer demand have led to increased availability of appropriate and locally manufactured farm machinery and ultimately to India becoming the world‘s largest tractor manufacturer.<ref name="FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.">FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.</ref> A very comprehensive comparison of Energy Use in Conventional and Organic Cropping Systems has been carried out by the '''National Sustainable Agriculture Information Service (ATTRA) '''of the US '''National Centre for Appropriate Technology (NCAT)'''. The report shows, in a review of existing studies, that there are many complexities involved in comparing energy consumption in conventional and organic cropping systems. Certain research indicates that organic agriculture is more energy-efficient than conventional agriculture, but not in all cases. In some cases, organic agriculture may be more energy-intensive, depending on the specific farming operation, the crop produced and the post-production handling. It is important to assess the energy-intensiveness of food systems in a holistic manner that incorporates energy consumption for the entire life cycle of the food product.<ref name="Hill, H. et al. (2009), Comparing Energy Use in Conventional and Organic Cropping Systems, NCAT Program, ATTRA, IP339, Slot 337, Version 051409. USA. http://attra.ncat.org/attra-pub/croppingsystems.html">Hill, H. et al. (2009), Comparing Energy Use in Conventional and Organic Cropping Systems, NCAT Program, ATTRA, IP339, Slot 337, Version 051409. USA. http://attra.ncat.org/attra-pub/croppingsystems.html</ref><br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/><br/> | ||
| + | |||
| + | == Irrigation<br/> == | ||
| + | |||
| + | Access to water is a major determinant of land productivity and active water management through irrigation offers an important opportunity to stabilise yields. Irrigation is therefore of the utmost significance in the agricultural production process and this chapter is consequently accorded great importance. Irrigated land productivity is more than double that of rainfed land. In sub-Saharan Africa, only 4 per cent of the area in production is under irrigation, compared with 39 per cent in South Asia and 29 per cent in East Asia.<ref name="World Bank (2007), World Development Report 2008: Agriculture for Development. (Report 41455). http://go.worldbank.org/BVIMU1PI60">World Bank (2007), World Development Report 2008: Agriculture for Development. (Report 41455). http://go.worldbank.org/BVIMU1PI60</ref> With growing water scarcity and costs of large-scale irrigation schemes rising, there is a need to enhance productivity by improving existing schemes, expanding small-scale schemes and developing water harvesting. Irrigation‖ refers to the distribution of water for growing crops, including the use of water storage and pumping, where appropriate. The energy demand for irrigation purposes is the energy required to lift water by pumping from surface sources, such as ponds, streams, or canals; or from below-ground sources using open wells or boreholes. This water is typically pumped to surface canals, reservoirs, or elevated tanks. The energy demand for water lifting is calculated by multiplying the head (the vertical distance from the water source to the field in metres) by the volume of water to be raised in cubic metres (m<sup>3</sup>). Pumping energy needs are typically expressed in units of m<sup>4</sup>.<br/><u>Decisions about energy and irrigation should be made on the basis of three key sequential steps<ref name="most of the Irrigation chapter is based on: USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">most of the Irrigation chapter is based on: USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref>:</u><br/> | ||
| + | |||
#Choosing the right irrigation technology: understanding the irrigation system needs for a given context, | #Choosing the right irrigation technology: understanding the irrigation system needs for a given context, | ||
#Choosing the right pump technology: understanding the various pumping technologies available, | #Choosing the right pump technology: understanding the various pumping technologies available, | ||
| − | #Choosing the right energy source: assessing which power sources are possible, desirable, and locally available to provide the necessary energy for that system. | + | #Choosing the right energy source: assessing which power sources are possible, desirable, and locally available to provide the necessary energy for that system.<br/> |
| − | <br/> | + | |
| − | [[Energy for Agriculture# | + | <br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
=== Choosing the Right Irrigation Technology<br/> === | === Choosing the Right Irrigation Technology<br/> === | ||
| + | |||
The question of which irrigation water distribution system is most suitable will depend on several factors including the crop(s) cultivated, climate, location, scale/area of agricultural production, quantity of water required over time, system cost, access to capital, local agricultural workers‘ technical capacity, local availability of equipment, maintenance and repair services and availability of spare parts. Irrigation systems differ in their peak and average water requirements, the need for water storage (e.g. tanks, cisterns), and the ultimate need for pumping and energy. Where small producers (<two hectares) are targeted, the more expensive irrigation technologies may only be accessible through membership of cooperatives and farmers‘ associations, who have sufficient ability to raise capital, as well as having the management capacity for technology adoption, operation, maintenance, and replacement. The reliability of the selected irrigation system and the ability of its maintenance is of primary importance for farmers.<br/> | The question of which irrigation water distribution system is most suitable will depend on several factors including the crop(s) cultivated, climate, location, scale/area of agricultural production, quantity of water required over time, system cost, access to capital, local agricultural workers‘ technical capacity, local availability of equipment, maintenance and repair services and availability of spare parts. Irrigation systems differ in their peak and average water requirements, the need for water storage (e.g. tanks, cisterns), and the ultimate need for pumping and energy. Where small producers (<two hectares) are targeted, the more expensive irrigation technologies may only be accessible through membership of cooperatives and farmers‘ associations, who have sufficient ability to raise capital, as well as having the management capacity for technology adoption, operation, maintenance, and replacement. The reliability of the selected irrigation system and the ability of its maintenance is of primary importance for farmers.<br/> | ||
| − | {| | + | |
| + | {| style="width: 100%; height: 588px;" border="1" cellspacing="1" cellpadding="1" | ||
|- | |- | ||
| − | | style="background-color: rgb(204, 204, 204)" | '''Irrigation system''' | + | | style="background-color: rgb(204, 204, 204);" | '''Irrigation system''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Technology''' | + | | style="background-color: rgb(204, 204, 204);" | '''Technology''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Advantage''' | + | | style="background-color: rgb(204, 204, 204);" | '''Advantage''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Disadvantages''' | + | | style="background-color: rgb(204, 204, 204);" | '''Disadvantages''' |
|- | |- | ||
| Manual irrigation | | Manual irrigation | ||
| Line 48: | Line 79: | ||
| Difficult to regulate the pressure in sloped sites; system maintenance can be higher than other irrigation systems (if water has to be filtered to remove particles that may close the tubes); the system can be fairly costly to install, esp. higher end automated technologies (although some very low cost models exist which require much more labour). | | Difficult to regulate the pressure in sloped sites; system maintenance can be higher than other irrigation systems (if water has to be filtered to remove particles that may close the tubes); the system can be fairly costly to install, esp. higher end automated technologies (although some very low cost models exist which require much more labour). | ||
|} | |} | ||
| + | |||
<br/>In general, the scale of production, costs of the technology and organisational capacity of the farmers will drive decisions about which irrigation approach to use. The size, cost, and capacity of suitable technologies increase along with the scale of production. The following table provides some guidance for the selection of irrigation technologies based on key criteria such as production scale, energy source, and budget.<br/> | <br/>In general, the scale of production, costs of the technology and organisational capacity of the farmers will drive decisions about which irrigation approach to use. The size, cost, and capacity of suitable technologies increase along with the scale of production. The following table provides some guidance for the selection of irrigation technologies based on key criteria such as production scale, energy source, and budget.<br/> | ||
| − | {| | + | |
| + | {| style="width: 100%;" border="1" cellspacing="1" cellpadding="1" | ||
|- | |- | ||
| − | | style="background-color: rgb(204, 204, 204)" | '''Irrigation Method''' | + | | style="background-color: rgb(204, 204, 204);" | '''Irrigation Method''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Irrigated Area''' | + | | style="background-color: rgb(204, 204, 204);" | '''Irrigated Area''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Water Requirements''' | + | | style="background-color: rgb(204, 204, 204);" | '''Water Requirements''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Energy Requirements''' | + | | style="background-color: rgb(204, 204, 204);" | '''Energy Requirements''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Capital Cost''' | + | | style="background-color: rgb(204, 204, 204);" | '''Capital Cost''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Operating Cost''' | + | | style="background-color: rgb(204, 204, 204);" | '''Operating Cost''' |
|- | |- | ||
| Manual | | Manual | ||
| Line 86: | Line 119: | ||
| Medium | | Medium | ||
|} | |} | ||
| − | <br/>[[Energy for Agriculture# | + | |
| + | <br/>[[Energy for Agriculture#toc|►Go to Top]] | ||
| + | |||
=== Choosing the Right Pump Technology<br/> === | === Choosing the Right Pump Technology<br/> === | ||
| + | |||
There are a wide variety of pump technologies available for irrigation, but not all are appropriate for every type of irrigation system. Pumps differ in their pumping approach, size and capacity, the type of water source they are suitable for (groundwater or surface water), the scale/area of irrigation possible, their cost and technical complexity. Pumps can be classified into three categories: hydraulic, manual or motorised. The table below offers guidance regarding the most appropriate type of water pump, given the area to be irrigated, combined with the water table depth.<br/> | There are a wide variety of pump technologies available for irrigation, but not all are appropriate for every type of irrigation system. Pumps differ in their pumping approach, size and capacity, the type of water source they are suitable for (groundwater or surface water), the scale/area of irrigation possible, their cost and technical complexity. Pumps can be classified into three categories: hydraulic, manual or motorised. The table below offers guidance regarding the most appropriate type of water pump, given the area to be irrigated, combined with the water table depth.<br/> | ||
| − | {| | + | |
| + | {| style="width: 100%; height: 119px;" border="1" cellspacing="1" cellpadding="1" | ||
|- | |- | ||
| − | | style="background-color: rgb(204, 204, 204)" | '''Irrigated Area''' | + | | style="background-color: rgb(204, 204, 204);" | '''Irrigated Area''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Water Table < 8 m''' | + | | style="background-color: rgb(204, 204, 204);" | '''Water Table < 8 m''' |
| − | | style="background-color: rgb(204, 204, 204)" | '''Water Table > 8 m''' | + | | style="background-color: rgb(204, 204, 204);" | '''Water Table > 8 m''' |
|- | |- | ||
| < 2 ha | | < 2 ha | ||
| Line 107: | Line 144: | ||
| Motorised Pump:<br/>3 – 5 hp mechanical pump (submersile only)<br/>< 5 hp electric pump (submersible only) | | Motorised Pump:<br/>3 – 5 hp mechanical pump (submersile only)<br/>< 5 hp electric pump (submersible only) | ||
|} | |} | ||
| + | |||
<br/> | <br/> | ||
| + | |||
=== Choosing the Right Energy Source<br/> === | === Choosing the Right Energy Source<br/> === | ||
| + | |||
Different pump technologies are often flexible regarding the type of energy source powering them. There follows an overview of the different energy sources available for motorised pumping, and the definition and characteristics of each.<br/> | Different pump technologies are often flexible regarding the type of energy source powering them. There follows an overview of the different energy sources available for motorised pumping, and the definition and characteristics of each.<br/> | ||
| + | |||
==== Grid Electricity<br/> ==== | ==== Grid Electricity<br/> ==== | ||
| − | Where [[Portal:Grid|grid]] connection is available an electric pump can be powered directly. However, the cost, availability, reliability, and quality of local electricity supplies determine the use of this energy source. [[Energy for Agriculture# | + | |
| + | Where [[Portal:Grid|grid]] connection is available an electric pump can be powered directly. However, the cost, availability, reliability, and quality of local electricity supplies determine the use of this energy source. [[Energy for Agriculture#toc|►Go to Top]]<br/> | ||
| + | |||
==== Fuels for Combustion Engines<br/> ==== | ==== Fuels for Combustion Engines<br/> ==== | ||
| − | Motorised pumps can be powered by fossil fuels (diesel, gasoline), either through generators that create electricity, or by transmitting power to the pump through a drive belt and vertical rotating shaft. In addition, some submersible pumps (i.e. progressing cavity pumps) operate by direct displacement, like piston pumps. The pumps tend to be more expensive but nevertheless more efficient than centrifugal pumps. The use of biofuels (plantoil, biogas) is still limited. A few experiments are underway, e.g. in India with biofuels made from local oilseeds<ref name="UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf">UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf</ref>, in the [http://www.giz.de/en/ GIZ] PSDA program in [[Kenya Energy Situation|Kenya]] with biogas<ref name="GTZ/HERA (2010b), (Poverty-oriented Basic Energy Services), Dimpl, E. and M. Blunck. Small-Scale Electricity Generation from Biomass – Part II: Biogas. www.gtz.de/hera.">GTZ/HERA (2010b), (Poverty-oriented Basic Energy Services), Dimpl, E. and M. Blunck. Small-Scale Electricity Generation from Biomass – Part II: Biogas. www.gtz.de/hera.</ref> and in [[Nepal Energy Situation|Nepal]], where Winrock International is supporting community-grown [[Biofuel: Jatropha|jatropha oil]] for irrigation pumps<ref name="Energia (2009), Karlsson, G. and B. Khamarung Biofuels for sustainable rural development and empowerment of women. Case studies from Africa and Asia, p. 25-28.">Energia (2009), Karlsson, G. and B. Khamarung Biofuels for sustainable rural development and empowerment of women. Case studies from Africa and Asia, p. 25-28.</ref>. <br/> | + | |
| − | <br/> | + | Motorised pumps can be powered by fossil fuels (diesel, gasoline), either through generators that create electricity, or by transmitting power to the pump through a drive belt and vertical rotating shaft. In addition, some submersible pumps (i.e. progressing cavity pumps) operate by direct displacement, like piston pumps. The pumps tend to be more expensive but nevertheless more efficient than centrifugal pumps. The use of biofuels (plantoil, biogas) is still limited. A few experiments are underway, e.g. in India with biofuels made from local oilseeds<ref name="UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf">UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf</ref>, in the [http://www.giz.de/en/ GIZ] PSDA program in [[Kenya Energy Situation|Kenya]] with biogas<ref name="GTZ/HERA (2010b), (Poverty-oriented Basic Energy Services), Dimpl, E. and M. Blunck. Small-Scale Electricity Generation from Biomass – Part II: Biogas. www.gtz.de/hera.">GTZ/HERA (2010b), (Poverty-oriented Basic Energy Services), Dimpl, E. and M. Blunck. Small-Scale Electricity Generation from Biomass – Part II: Biogas. www.gtz.de/hera.</ref> and in [[Nepal Energy Situation|Nepal]], where Winrock International is supporting community-grown [[Biofuel: Jatropha|jatropha oil]] for irrigation pumps<ref name="Energia (2009), Karlsson, G. and B. Khamarung Biofuels for sustainable rural development and empowerment of women. Case studies from Africa and Asia, p. 25-28.">Energia (2009), Karlsson, G. and B. Khamarung Biofuels for sustainable rural development and empowerment of women. Case studies from Africa and Asia, p. 25-28.</ref>.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
==== Solar Energy (PV)<br/> ==== | ==== Solar Energy (PV)<br/> ==== | ||
| − | see [[Photovoltaic (PV) Pumping|Photovoltaic (PV) Pumping]] <br/> | + | |
| − | <br/> | + | see [[Photovoltaic (PV) Pumping|Photovoltaic (PV) Pumping]]<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
==== Wind Energy<br/> ==== | ==== Wind Energy<br/> ==== | ||
| − | Wind can be used to power both mechanical and electric pumps. Mechanical wind-powered pumps use reciprocal non-motorised submersible pumps and require wind speeds of 2.5 m/s minimum up to 4 m/s optimum. Capacity is much lower than for motorised centrifugal pumps, in the range of 1 m3/hr at depths of 20 metres or more.<br/>Mechanical wind pumps require the availability of local maintenance and repair facilities to be able to respond quickly to mechanical failures. Adequate wind speeds must be present at the location of the wells. One advantage is that they can pump day or night as long as there is sufficient wind, and can be used independently of electricity or fuel supplies. A disadvantage is that they must be located directly above the well, a location that may not be optimal in terms of local wind resources. Wind pumps are appropriate in windy areas without other sources of power, and only for small irrigable areas.<br/>Wind electric turbines convert the kinetic energy of the wind into rotational mechanical energy that drives a generator to produce electricity, e.g. for pumping water for irrigation. Windmills are positioned for optimal wind conditions, providing greater site flexibility and in addition facilitating electricity production for other uses. Water-pumping applications generally make use of wind turbines with rated output between 1 kWe and 10 kWe. A wide variety of small wind electric turbines is commercially available, with rated outputs ranging from a few tens of watts to 100 kilowatts, and is used worldwide to provide electricity in locations where alternatives are unavailable or are too expensive or difficult to provide. <br/> | + | |
| − | [[Energy for Agriculture# | + | Wind can be used to power both mechanical and electric pumps. Mechanical wind-powered pumps use reciprocal non-motorised submersible pumps and require wind speeds of 2.5 m/s minimum up to 4 m/s optimum. Capacity is much lower than for motorised centrifugal pumps, in the range of 1 m3/hr at depths of 20 metres or more.<br/>Mechanical wind pumps require the availability of local maintenance and repair facilities to be able to respond quickly to mechanical failures. Adequate wind speeds must be present at the location of the wells. One advantage is that they can pump day or night as long as there is sufficient wind, and can be used independently of electricity or fuel supplies. A disadvantage is that they must be located directly above the well, a location that may not be optimal in terms of local wind resources. Wind pumps are appropriate in windy areas without other sources of power, and only for small irrigable areas.<br/>Wind electric turbines convert the kinetic energy of the wind into rotational mechanical energy that drives a generator to produce electricity, e.g. for pumping water for irrigation. Windmills are positioned for optimal wind conditions, providing greater site flexibility and in addition facilitating electricity production for other uses. Water-pumping applications generally make use of wind turbines with rated output between 1 kWe and 10 kWe. A wide variety of small wind electric turbines is commercially available, with rated outputs ranging from a few tens of watts to 100 kilowatts, and is used worldwide to provide electricity in locations where alternatives are unavailable or are too expensive or difficult to provide.<br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
==== Hybrid Systems<br/> ==== | ==== Hybrid Systems<br/> ==== | ||
| − | Small-scale hybrid power systems, also a mature technology, are used worldwide. By combining different energy sources (solar-diesel, wind-diesel) hybrids can provide widespread and highly reliable electrical supply. These small hybrid systems are easy to install—no special tools or concrete are required.<br/> | + | |
| − | [[Energy for Agriculture# | + | Small-scale hybrid power systems, also a mature technology, are used worldwide. By combining different energy sources (solar-diesel, wind-diesel) hybrids can provide widespread and highly reliable electrical supply. These small hybrid systems are easy to install—no special tools or concrete are required.<br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
| + | <br/> | ||
| + | |||
| + | ==== Further Information<br/> ==== | ||
| + | |||
| + | *[[Powering Agriculture: Irrigation|Irrigation on Powering Agriculture Portal]]<br/> | ||
| + | *[[Solar Powered Irrigation Systems - Technology, Economy, Impacts|Solar Powered Irrigation Systems - Technology, Economy, Impacts]] | ||
| + | |||
| + | <br/> | ||
| + | |||
= Post-harvest and Storage<br/> = | = Post-harvest and Storage<br/> = | ||
== Packing == | == Packing == | ||
| − | The best precondition for storage is a proper harvest and post-harvest handling. Sorting, grading, and packing produce into storage containers after harvest to prevent losses is important, especially for easily perishable crops such as tuber crops, vegetables and fruits. Reducing the number of times produce is handled between harvest and consumption will reduce mechanical damage and subsequent losses. Packing houses for crops are often simple structures that provide shade and comfortable working conditions for farm workers conducting manual post-harvest operations. Manual handling is recommended for horticultural high-value produce. <br/> | + | |
| − | [[Energy for Agriculture# | + | The best precondition for storage is a proper harvest and post-harvest handling. Sorting, grading, and packing produce into storage containers after harvest to prevent losses is important, especially for easily perishable crops such as tuber crops, vegetables and fruits. Reducing the number of times produce is handled between harvest and consumption will reduce mechanical damage and subsequent losses. Packing houses for crops are often simple structures that provide shade and comfortable working conditions for farm workers conducting manual post-harvest operations. Manual handling is recommended for horticultural high-value produce.<br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
== Storage == | == Storage == | ||
| − | A certain percentage of the farm produce has to be stored before selling at the market, because production is seasonal while demand, particularly for vegetables and fruits, continues year-round. Storage facilities secure agricultural commodities kept for rapid emergency aid and buffer stocks to stabilise domestic prices. Besides storage at central hubs and transportation centres, more localised storage is often necessary.<br/> | + | |
| − | [[Energy for Agriculture# | + | A certain percentage of the farm produce has to be stored before selling at the market, because production is seasonal while demand, particularly for vegetables and fruits, continues year-round. Storage facilities secure agricultural commodities kept for rapid emergency aid and buffer stocks to stabilise domestic prices. Besides storage at central hubs and transportation centres, more localised storage is often necessary.<br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
=== Dry Storage === | === Dry Storage === | ||
| − | To achieve increased production, traditional village stores need to be improved within the means of smallholders to achieve a certain transition to larger and more modern storage systems.<ref name="FAO (2009b), Investing in Food Security, Agriculture and Consumer Protection Department, Rome. www.fao.org/ag/portal/ag-home/en">FAO (2009b), Investing in Food Security, Agriculture and Consumer Protection Department, Rome. www.fao.org/ag/portal/ag-home/en</ref> This requires the management of dry storage facilities, mainly for post-harvest and storage of grain (maize, sorghum, millet, wheat and rice), pulses (beans, peas), roots and tuber crops, and oilseeds, whereas fruits and vegetables require cold storage facilities. For grain, pulses and oil seeds, mechanical damage mostly occurs during harvesting, transport and processing, while insects, | + | |
| − | [[Energy for Agriculture# | + | To achieve increased production, traditional village stores need to be improved within the means of smallholders to achieve a certain transition to larger and more modern storage systems.<ref name="FAO (2009b), Investing in Food Security, Agriculture and Consumer Protection Department, Rome. www.fao.org/ag/portal/ag-home/en">FAO (2009b), Investing in Food Security, Agriculture and Consumer Protection Department, Rome. www.fao.org/ag/portal/ag-home/en</ref> This requires the management of dry storage facilities, mainly for post-harvest and storage of grain (maize, sorghum, millet, wheat and rice), pulses (beans, peas), roots and tuber crops, and oilseeds, whereas fruits and vegetables require cold storage facilities. For grain, pulses and oil seeds, mechanical damage mostly occurs during harvesting, transport and processing, while insects, mold and rodents damage produce during storage. For such staple foods, energy input or expensive technology is generally. Good storage practice is the key to maintaining quality and value throughout the storage season. A precondition is that crops are in good condition prior to storage, which means well cleaned and carefully winnowed to remove live adult insects. Straw, chaff, weed seeds, stones and dirt must also be removed, as they hold water and their removal will allow grain to dry faster. The grain should be well dried to an appropriate level of moisture content. Good drying is essential because damp grain will become moldy and spoil. Solar dryers can be used—sun drying will also help get rid of adult insects in the grain. However, as sun drying will not kill all immature stages, such as larvae living inside grains, it is sometimes necessary to treat the grain with insecticide, thus killing the immature stages once they mature and emerge from the grain as adults. Maize is often shelled by hand. This produces better quality grain but is a very slow process. Quicker and effective shelling can be achieved using a variety of mechanical operated machines. The grain must be sufficiently dry both for these and for safe storage. A good store will keep the grain dry and cool and provide protection against rodents and birds. Practising good store hygiene—keeping everything as clean as is practically possible—helps maintain the condition of the crop and the store throughout the storage season. As pests can attack the store at any time, it is important to inspect the store and crop regularly. There are many appropriate technologies and traditional methods for preventing post-harvest losses, varying from location to location. Dry storage facilities range from small-scale, on-farm storage to medium and large-scale facilities of several hundred of tons or more.<br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| + | |||
=== Cold Storage === | === Cold Storage === | ||
| + | |||
Cold storage in tropical and subtropical climates can generate high energy demand. In general, the initial cooling, processing and cold storage of fresh fruit and vegetables is among the most energy-intensive activities of the food industry. However, for fresh fruits and vegetables, cooling is also one of the most important steps in the post-harvest handling chain to reduce respiration rates, extend shelf life and protect quality. Deterioration of fruits and vegetables during storage depends largely on temperature, so the temperature must be lowered to an appropriate level, to avoid damage and increase the length of storage time. Controlled temperature storage is a critical factor for most perishable agricultural products and a consistent cold chain is necessary to maintain the quality of many high-value agricultural products. Cooling also offers farmers the opportunity to increase income by extending the period for selling and marketing the products when better prices can be achieved. In developing countries, refrigeration in rural areas must often be operated without reliable electricity supply and the provision of a cold chain or store rooms for cooling bigger quantities of produce is often impossible. <u>Three technologies are available for cooling smaller quantities of produce:</u> | Cold storage in tropical and subtropical climates can generate high energy demand. In general, the initial cooling, processing and cold storage of fresh fruit and vegetables is among the most energy-intensive activities of the food industry. However, for fresh fruits and vegetables, cooling is also one of the most important steps in the post-harvest handling chain to reduce respiration rates, extend shelf life and protect quality. Deterioration of fruits and vegetables during storage depends largely on temperature, so the temperature must be lowered to an appropriate level, to avoid damage and increase the length of storage time. Controlled temperature storage is a critical factor for most perishable agricultural products and a consistent cold chain is necessary to maintain the quality of many high-value agricultural products. Cooling also offers farmers the opportunity to increase income by extending the period for selling and marketing the products when better prices can be achieved. In developing countries, refrigeration in rural areas must often be operated without reliable electricity supply and the provision of a cold chain or store rooms for cooling bigger quantities of produce is often impossible. <u>Three technologies are available for cooling smaller quantities of produce:</u> | ||
| + | |||
*Passive/evaporative coolers: where temperatures between 10-25°C are needed, no energy input is required. | *Passive/evaporative coolers: where temperatures between 10-25°C are needed, no energy input is required. | ||
| − | *Absorption refrigerators (heat driven coolers (HDC), requiring temperatures below 10°C; heat as an energy source is used to drive the cooling system (e.g. solar, kerosene-fueled flame). | + | *Absorption refrigerators (heat driven coolers (HDC), requiring temperatures below 10°C; heat as an energy source is used to drive the cooling system (e.g. solar, kerosene-fueled flame)<ref>Green Cooling Initiative -Double Effect Absorption Chiller. Website: http://bit.ly/1LfePrw</ref>. |
| − | *Refrigerators, which are electrically driven, use mechanical compression technology. Refrigeration is dependent on a reliable and | + | *Refrigerators, which are electrically driven, use mechanical compression technology. Refrigeration is dependent on a reliable and continuous supply of electricity which can be generated from different sources: from the grid, diesel powered compressor, mechanical power generated from a water turbine, by solar energy converted by solar cells into electricity stored in batteries or by solar energy and evaporation.<ref name="Practical Action (2010a), Technical Brief - Solar Photovoltaic refrigeration of vaccines. UK. www.practicalaction.org">Practical Action (2010a), Technical Brief - Solar Photovoltaic refrigeration of vaccines. UK. www.practicalaction.org</ref> |
| + | |||
<br/>Commercial PV-powered refrigerators were introduced in developing countries to cut down the use of kerosene or gas-powered absorption refrigerators, which are the most common alternatives but also those with the most negative impact on the environment. First introduced for medical refrigeration they now also constitute an alternative method of storing small quantities of agricultural products for sale. The newest type of solar refrigerator is solar powered but requires neither solar panels nor a battery as it functions on the principle of evaporation. Solar photovoltaic power for refrigerators has great potential for lower running costs, greater reliability and a longer working life than kerosene refrigerators or diesel generators. A life-cycle cost analysis has shown that the costs are approximately the same for solar and kerosene refrigerators, but because they are more reliable and environmentally friendly, solar refrigerators are the preferred option. <ref name="Practical Action (2010b), Technical Brief - Refrigeration for Developing Countries. UK. www.practicalaction.org">Practical Action (2010b), Technical Brief - Refrigeration for Developing Countries. UK. www.practicalaction.org</ref><br/> | <br/>Commercial PV-powered refrigerators were introduced in developing countries to cut down the use of kerosene or gas-powered absorption refrigerators, which are the most common alternatives but also those with the most negative impact on the environment. First introduced for medical refrigeration they now also constitute an alternative method of storing small quantities of agricultural products for sale. The newest type of solar refrigerator is solar powered but requires neither solar panels nor a battery as it functions on the principle of evaporation. Solar photovoltaic power for refrigerators has great potential for lower running costs, greater reliability and a longer working life than kerosene refrigerators or diesel generators. A life-cycle cost analysis has shown that the costs are approximately the same for solar and kerosene refrigerators, but because they are more reliable and environmentally friendly, solar refrigerators are the preferred option. <ref name="Practical Action (2010b), Technical Brief - Refrigeration for Developing Countries. UK. www.practicalaction.org">Practical Action (2010b), Technical Brief - Refrigeration for Developing Countries. UK. www.practicalaction.org</ref><br/> | ||
| + | |||
{| cellspacing="1" cellpadding="1" border="1" style="width: 100%" | {| cellspacing="1" cellpadding="1" border="1" style="width: 100%" | ||
|- | |- | ||
| Line 165: | Line 226: | ||
| Electric grid; diesel back-up generators | | Electric grid; diesel back-up generators | ||
|} | |} | ||
| − | <br/>[[Energy for Agriculture# | + | |
| + | <br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> | ||
| + | |||
| + | <br/> | ||
| + | |||
= Processing = | = Processing = | ||
== Drying of Produce == | == Drying of Produce == | ||
| − | To add value to fresh fruits and vegetables, they must be dried before packaging and marketing. Drying of fresh produce, which contains up to 95 per cent water, to a safe moisture content of 7-8 per cent requires the application of low heat and ventilation for best results. Processing fruits and vegetables on a small-scale level is therefore less mechanised than other agro-processing activities. It is important that the used equipment is constructed of stainless steel because acids in fruits corrode mild steel. Peeling, cutting, or slicing produce into uniformly sized pieces is usually required for successful drying. This is typically done by hand. Machines are available for larger quantities and can speed up the peeling, cutting, or slicing of produce. For drying commodities (e.g. tea, coffee, copra or abaca) in larger quantities, heat assisted drying is used, with many different types of dryer available. <br/> | + | |
| − | <br/> | + | To add value to fresh fruits and vegetables, they must be dried before packaging and marketing. Drying of fresh produce, which contains up to 95 per cent water, to a safe moisture content of 7-8 per cent requires the application of low heat and ventilation for best results. Processing fruits and vegetables on a small-scale level is therefore less mechanised than other agro-processing activities. It is important that the used equipment is constructed of stainless steel because acids in fruits corrode mild steel. Peeling, cutting, or slicing produce into uniformly sized pieces is usually required for successful drying. This is typically done by hand. Machines are available for larger quantities and can speed up the peeling, cutting, or slicing of produce. For drying commodities (e.g. tea, coffee, copra or abaca) in larger quantities, heat assisted drying is used, with many different types of dryer available.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
=== Direct and Indirect Solar Drying<br/> === | === Direct and Indirect Solar Drying<br/> === | ||
| − | Laying produce out in the sun to dry naturally is common in sunny climates and is a very inexpensive drying method. It is still the predominant method for producing raisins worldwide. However, traditional sun drying methods often yield low quality as the produce is not protected against rain and dust and other contaminations.<br/>Indirect solar drying requires a covered dryer that protects produce from direct sunlight while capturing more heat from the sun. With natural air flow inside, an indirect dryer reduces heat and pest damage while speeding up drying.<br/> | + | |
| − | <br/> | + | Laying produce out in the sun to dry naturally is common in sunny climates and is a very inexpensive drying method. It is still the predominant method for producing raisins worldwide. However, traditional sun drying methods often yield low quality as the produce is not protected against rain and dust and other contaminations.<br/>Indirect solar drying requires a covered dryer that protects produce from direct sunlight while capturing more heat from the sun. With natural air flow inside, an indirect dryer reduces heat and pest damage while speeding up drying.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
=== Heat-assisted Drying<br/> === | === Heat-assisted Drying<br/> === | ||
| − | In rainy weather regions or humid locations, heat-assisted dryers create warm air flow inside the dryer to speed up drying. Heat sources may be electric, propane, wood, or any other locally available fuel. Appropriate drying temperatures can easily be achieved with low-powered, relatively inexpensive technologies. The majority of energy used in heated air dryers is actually used to heat the air. Electricity for moving air is only a small fraction of the air heating costs, which depend on the initial and final moisture contents of the product. If energy conservation measures such as air recirculation are incorporated into the operation, fuel use can drop significantly.<ref name="USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref><br/> | + | |
| − | <br/> | + | In rainy weather regions or humid locations, heat-assisted dryers create warm air flow inside the dryer to speed up drying. Heat sources may be electric, propane, wood, or any other locally available fuel. Appropriate drying temperatures can easily be achieved with low-powered, relatively inexpensive technologies. The majority of energy used in heated air dryers is actually used to heat the air. Electricity for moving air is only a small fraction of the air heating costs, which depend on the initial and final moisture contents of the product. If energy conservation measures such as air recirculation are incorporated into the operation, fuel use can drop significantly.<ref name="USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html">USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html</ref><br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
=== Solar Drying === | === Solar Drying === | ||
| − | see [[Solar Drying|Solar Drying]]<br/> | + | |
| − | <br/> | + | see [[Solar Drying|Solar Drying]]<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
== Cereal Milling == | == Cereal Milling == | ||
| − | See [[Grain Mill|Grain mills]] <br/> | + | |
| − | <br/> | + | See [[Grain Mill|Grain mills]]<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
== Peanut Value Chain - Example and Experiences from Bolivia<br/> == | == Peanut Value Chain - Example and Experiences from Bolivia<br/> == | ||
== Edible Oil Extraction<br/> == | == Edible Oil Extraction<br/> == | ||
| − | Edible oil is a high-value product for generating income. The main crops for oil extraction are nuts, e.g. groundnut, shea nut, coconut, palm kernel, oil seeds (e.g. sesame, sun flower, mustard seed) and oil palm fruit. By-products of oil seeds include press cake with high protein and nutrient contents for animal feed, whereas the by-products of coconut and groundnuts are for human consumption. Both generate additional income for farmers. The by-products of agro-industrial oil mills are used in biogas digesters for electricity generation or generation of process heat or steam.<br/>There are many hand-operated technologies for pressing oil (spindle press), hydraulic presses or engine driven oil presses. There is huge demand for mechanical power alternatives to reduce drudgery for humans. Researchers and development specialists working with '''Appropriate Technology International (ATI) '''have developed a method to introduce small-scale oil expelling enterprises to rural areas in Africa. A typical set-up consists of a ram press for extracting the oil, a filtration device, tools for maintenance, and perhaps most importantly, training, support and information on the proper use of the oil and cake (the residue of the seeds after the oil has been squeezed out), and the socioeconomic and nutritional benefits of an oilseed processing enterprise. The ram press, driven manually by a long handle, consists of a small piston that presses a measured load of oilseeds into a metal cage. The basic design was developed in Tanzania in 1985 by Carl Bielenberg of ATI. The original and improved versions are now widely used there, as well as elsewhere in Africa. The dry process of extracting oil cannot be executed only by mechanical or hydraulic presses, but also by continuously operating screw presses, known as oil expellers. Expellers are usually driven by petrol or diesel engines or electric motors but can also be run on animal or water power.<br/>A small motorised expeller, named KOMET, is being manufactured by IBG Montforts + Reiners, Moenchengladbach, Federal Republic of Germany. Large sized material, such as copra or | + | |
| − | <br/> | + | Edible oil is a high-value product for generating income. The main crops for oil extraction are nuts, e.g. groundnut, shea nut, coconut, palm kernel, oil seeds (e.g. sesame, sun flower, mustard seed) and oil palm fruit. By-products of oil seeds include press cake with high protein and nutrient contents for animal feed, whereas the by-products of coconut and groundnuts are for human consumption. Both generate additional income for farmers. The by-products of agro-industrial oil mills are used in biogas digesters for electricity generation or generation of process heat or steam.<br/>There are many hand-operated technologies for pressing oil (spindle press), hydraulic presses or engine driven oil presses. There is huge demand for mechanical power alternatives to reduce drudgery for humans. Researchers and development specialists working with '''Appropriate Technology International (ATI) '''have developed a method to introduce small-scale oil expelling enterprises to rural areas in Africa. A typical set-up consists of a ram press for extracting the oil, a filtration device, tools for maintenance, and perhaps most importantly, training, support and information on the proper use of the oil and cake (the residue of the seeds after the oil has been squeezed out), and the socioeconomic and nutritional benefits of an oilseed processing enterprise. The ram press, driven manually by a long handle, consists of a small piston that presses a measured load of oilseeds into a metal cage. The basic design was developed in Tanzania in 1985 by Carl Bielenberg of ATI. The original and improved versions are now widely used there, as well as elsewhere in Africa. The dry process of extracting oil cannot be executed only by mechanical or hydraulic presses, but also by continuously operating screw presses, known as oil expellers. Expellers are usually driven by petrol or diesel engines or electric motors but can also be run on animal or water power.<br/>A small motorised expeller, named KOMET, is being manufactured by IBG Montforts + Reiners, Moenchengladbach, Federal Republic of Germany. Large sized material, such as copra or palm kernels, must be crushed into pieces of about 5 mm diametre. The standard power source is a 3 kW electric motor with stepless variable gearbox. Alternatively the unit can be driven by a diesel engine (11 kW at 3000 rpm), equipped with a dynamo and clutch. In general, in Asia, Latin America and Africa there are large numbers of processing equipment and machinery manufacturers. However, investment in '''research and development (R&D) '''is required to upgrade traditional small-scale technologies. In sub-Saharan Africa for example, the use of rudimentary technologies for processing millet, sorghum and other local cereals has led to increased dependence of the growing urban population on imported wheat and rice. Critical factors for sucessful processing activities are also access to raw materials, inputs such as packaging materials, machinery and spare parts and qualified human resources<ref name="FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.">FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.</ref>.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
= Commercialisation<br/> = | = Commercialisation<br/> = | ||
== Market Infrastructure and Transport<br/> == | == Market Infrastructure and Transport<br/> == | ||
| − | Continued provision of safe and nutritious food at affordable prices will require increased food production, effective rural-to-urban market linkages and efficient support services. Storage facilities to minimise post-harvest losses and reduce health risks can solve logistical, food safety and marketing problems. Agro-processing extends markets to meet increased food demands. The energy input in storage and processing facilities has been described above. Investment in rural power supply facilities is a requirement for infrastructure improvement in general, not only for marketing. Rural infrastructure design must enable smallholders to access local markets easily and reduce input costs such as transport and distribution. Manual technologies for transportation consist largely of animal-powered vehicles, carts, or wagons. Fossil fuel-powered or biofuel-powered engines for transport cars or pick-up trucks offer the most frequently used mode of transportation. <br/> | + | |
| − | <br/> | + | Continued provision of safe and nutritious food at affordable prices will require increased food production, effective rural-to-urban market linkages and efficient support services. Storage facilities to minimise post-harvest losses and reduce health risks can solve logistical, food safety and marketing problems. Agro-processing extends markets to meet increased food demands. The energy input in storage and processing facilities has been described above. Investment in rural power supply facilities is a requirement for infrastructure improvement in general, not only for marketing. Rural infrastructure design must enable smallholders to access local markets easily and reduce input costs such as transport and distribution. Manual technologies for transportation consist largely of animal-powered vehicles, carts, or wagons. Fossil fuel-powered or biofuel-powered engines for transport cars or pick-up trucks offer the most frequently used mode of transportation.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
== Information and Telecommunication Technologies (ICT)<br/> == | == Information and Telecommunication Technologies (ICT)<br/> == | ||
| − | Market information is crucial to enable farmers and traders to make informed decisions about what to grow, when to harvest, to which markets produce should be sent and whether or not to store it. Modern'''information and communication technologies (ICT) '''open up possibilities for market information services to improve information delivery through SMS on cell phones and the rapid growth of FM (frequency modulation, a broadcast technology) radio stations offer more localised information services. Mobile phones also reduce communication and information costs significantly by reducing travel distances. In India a study found that the expansion of mobile phone coverage led to a significant reduction in consumer prices (4 per cent) while at the same time fishermen‘s profits increased by 8 per cent<ref name="GTZ (2010), Lucante, P. The Impact of Information and Communication Technologies (ICT) on Economic Growth and Development, Sector Project ICT for Development.">GTZ (2010), Lucante, P. The Impact of Information and Communication Technologies (ICT) on Economic Growth and Development, Sector Project ICT for Development.</ref>. In the long run, the internet may become an effective way of delivering information to farmers. PV-powered cell phones, PV-powered satellite phone kiosks (as in the case of Bangladesh-Grameen Shakti operations) have a typical power peak of 0.2-0.3 kW and include a 50 Wp system with 2 lights and a socket to charge cellular phone batteries. <br/> | + | |
| − | <br/> | + | Market information is crucial to enable farmers and traders to make informed decisions about what to grow, when to harvest, to which markets produce should be sent and whether or not to store it. Modern'''information and communication technologies (ICT) '''open up possibilities for market information services to improve information delivery through SMS on cell phones and the rapid growth of FM (frequency modulation, a broadcast technology) radio stations offer more localised information services. Mobile phones also reduce communication and information costs significantly by reducing travel distances. In India a study found that the expansion of mobile phone coverage led to a significant reduction in consumer prices (4 per cent) while at the same time fishermen‘s profits increased by 8 per cent<ref name="GTZ (2010), Lucante, P. The Impact of Information and Communication Technologies (ICT) on Economic Growth and Development, Sector Project ICT for Development.">GTZ (2010), Lucante, P. The Impact of Information and Communication Technologies (ICT) on Economic Growth and Development, Sector Project ICT for Development.</ref>. In the long run, the internet may become an effective way of delivering information to farmers. PV-powered cell phones, PV-powered satellite phone kiosks (as in the case of Bangladesh-Grameen Shakti operations) have a typical power peak of 0.2-0.3 kW and include a 50 Wp system with 2 lights and a socket to charge cellular phone batteries.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
== Training Facilities<br/> == | == Training Facilities<br/> == | ||
| − | Training facilities for farmers, traders and others in the various chains increase understanding of the social, technical, economic and environmental factors that affect the safety, quality and value of agricultural production and marketing. Providing buildings with power, including renewable energies such as solar lighting or energy-efficient construction materials, will help them to function as a model for modern energy services. For example, farm lighting (including security and safety of scattered buildings) with PV/ battery system) requires a power supply in the range of 50-500 watts. Computer equipment for training requires 8-300 Wp systems in addition to powering lights, fax, TV, etc. Internet servers for e-commerce are mostly integrated in a multifunctional solar facility (1 kW). <br/> | + | |
| − | <br/> | + | Training facilities for farmers, traders and others in the various chains increase understanding of the social, technical, economic and environmental factors that affect the safety, quality and value of agricultural production and marketing. Providing buildings with power, including renewable energies such as solar lighting or energy-efficient construction materials, will help them to function as a model for modern energy services. For example, farm lighting (including security and safety of scattered buildings) with PV/ battery system) requires a power supply in the range of 50-500 watts. Computer equipment for training requires 8-300 Wp systems in addition to powering lights, fax, TV, etc. Internet servers for e-commerce are mostly integrated in a multifunctional solar facility (1 kW).<br/><br/>[[Energy for Agriculture#toc|►Go to Top]]<br/> |
| − | [[Energy for Agriculture# | + | |
== Selling<br/> == | == Selling<br/> == | ||
| − | Efficient marketing infrastructure such as assembly markets, retail markets and wholesale markets is essential for cost-effective marketing. Terminal wholesale markets are located in major metropolitan areas, where produce is finally channelled to consumers through trade between wholesalers and retailers, caterers, etc. The characteristics of wholesale markets have changed considerably as retailing changes in response to urban growth, the increasing role of supermarkets and increased consumer spending capacity. These changes require responses in terms of how traditional wholesale markets are organised and managed. Despite the growth of supermarkets, there remains considerable scope to improve agricultural marketing in developing countries by constructing new retail markets. Rural assembly markets are located in production areas and serve primarily as places where farmers can meet with traders to sell their products. These markets may be occasional (perhaps weekly) or permanent, often taking place at night or in the early morning when lighting is needed. If there is no connection to the public grid, use of solar lanterns can be an alternative. PV rechargeable fluorescent lanterns range between 10 and 20 watts per lantern.<br/> | + | |
| + | Efficient marketing infrastructure such as assembly markets, retail markets and wholesale markets is essential for cost-effective marketing. Terminal wholesale markets are located in major metropolitan areas, where produce is finally channelled to consumers through trade between wholesalers and retailers, caterers, etc. The characteristics of wholesale markets have changed considerably as retailing changes in response to urban growth, the increasing role of supermarkets and increased consumer spending capacity. These changes require responses in terms of how traditional wholesale markets are organised and managed. Despite the growth of supermarkets, there remains considerable scope to improve agricultural marketing in developing countries by constructing new retail markets. Rural assembly markets are located in production areas and serve primarily as places where farmers can meet with traders to sell their products. These markets may be occasional (perhaps weekly) or permanent, often taking place at night or in the early morning when lighting is needed. If there is no connection to the public grid, use of solar lanterns can be an alternative. PV rechargeable fluorescent lanterns range between 10 and 20 watts per lantern.<br/><br/>[[Energy for Agriculture#toc|►Go to Top]] | ||
| + | |||
<br/> | <br/> | ||
| − | + | ||
= Downloads<br/> = | = Downloads<br/> = | ||
*[[:File:Energy Services for Modern Agriculture.pdf|Modern Energy Services for Modern Agriculture - A Review of Smallholder Farming in Developing Countries (GIZ-HERA, 2011)]] | *[[:File:Energy Services for Modern Agriculture.pdf|Modern Energy Services for Modern Agriculture - A Review of Smallholder Farming in Developing Countries (GIZ-HERA, 2011)]] | ||
*[http://pdf.usaid.gov/pdf_docs/PNADO634.pdf Empowering Agriculture - Energy Options for horticulture, (USAID, 2009)] | *[http://pdf.usaid.gov/pdf_docs/PNADO634.pdf Empowering Agriculture - Energy Options for horticulture, (USAID, 2009)] | ||
| + | |||
| + | [[Energy for Agriculture#toc|►Go to Top]] | ||
| + | |||
| + | <br/> | ||
| + | |||
| + | = Further Information<br/> = | ||
| + | |||
| + | *[[Portal:Productive Use|Productive Use Portal on energypedia]] | ||
| + | *[[Portal:Water and Energy for Food|Water and Energy for Food (WE4F) portal on energypedia]] | ||
| + | *[[Agricultural Processing|Agricultural Processing]] | ||
| + | *FAO Study: [[Opportunities for Agri-Food Chains to become Energy-Smart|Opportunities for Agri-Food Chains to become Energy-Smart]] | ||
| + | *[[Co-optimizing Solutions: Water and Energy for Food, Feed and Fiber|Water and Energy for Food, Feed and Fiber]]<br/> | ||
| + | *[[Sheabutter Processing|Sheabutter Processing in Benin]]<br/> | ||
| + | *[[Energy input in the Maize value chain in Benin|Energy input in the Maize value chain in Benin]] | ||
| + | *[[Publication_-_Fact_Sheet:_Mini-grids_and_Agriculture|Fact Sheet: Mini-grids and Agriculture]]<br/> | ||
| + | |||
<br/> | <br/> | ||
| − | |||
| − | + | [[Energy for Agriculture#toc|►Go to Top]] | |
| + | |||
<br/> | <br/> | ||
| + | |||
= References = | = References = | ||
| + | |||
<references /> | <references /> | ||
| + | <br/>[[Energy for Agriculture#toc|►Go to Top]] | ||
| + | |||
| + | [[Category:Powering_Agriculture]] | ||
| + | [[Category:Solar]] | ||
| + | [[Category:Hybrid_Systems]] | ||
| + | [[Category:Grid]] | ||
| + | [[Category:Bolivia]] | ||
| + | [[Category:Vegetable_Oil]] | ||
| + | [[Category:Wind]] | ||
[[Category:Agriculture]] | [[Category:Agriculture]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 18:53, 14 July 2020
Overview
Modern agriculture needs modern energy - the two are closely linked. For many developing countries, agriculture is the dominant sector in developing the economy. Increasing productivity and the modernisation of agricultural production systems are the primary drivers of global poverty reduction and energy plays a key role in achieving this. Energy input to modern and sustainable agricultural production and processing systems is a key factor in moving beyond subsistence farming towards food security, added value in rural areas and expansion into new agricultural markets. In many cases, renewable energy technologies and hybrid systems can provide energy services that neatly support the production process, e.g. by providing irrigation (pumps) or post harvest treatment (cooling) or processing (drying, milling, pressing). The requirements of mechanical energy in the agricultural production process are also of critical importance and include human and animal labour as well as fuels for mechanisation, pumping and other activities, and indirectly the production of fertilisers and agrochemicals.
The agricultural production chain involves the following steps:
The FAO Study "Opportunities for Agri-Food Chains to become Energy-Smart" examined the energy demand and sustainable alternatives for the value chains of milk, rice and vegetables.
Production
Land Preparation, Cultivation, Harvesting and Threshing
The power necessary for agricultural production is provided by human labour, draught animals or engine-driven machinery. Mechanisation is a key input in any farming system applying tools, implements and machinery to improve the productivity of farm labour and land. Based on the power source, the technological levels of mechanisation have been broadly classified as hand-tool technology, draught animal technology and mechanical power technology.[1]
The bulk of direct energy inputs in smallholder production is provided by human and draught animal power (DAP). Agriculture in developing countries relies heavily on the physical capability of farmers, with often limited output, depending on the physical energy available. A fit person consumes around 250-300 W in terms of energy, depending on climate and with a rest of 10-30 minutes/hour. The efficiency of energy conversion is only 25 per cent, with a maximum power output of 75 W. Operations involving human skill include activities such as planting, weeding, spraying and harvesting and using hand tools. Most horticultural commodities are harvested manually, including those grown in highly industrialised nations. Energy requirements during harvesting include mechanical energy for digging up root and tuber crops. For example, a simple, labour-saving cassava harvesting tool was introduced to Thai farmers by the International Centre for Tropical Agriculture (CIAT) reducing person-days from 15-40 (depending on the type of soil and the yield) to 5-10 days only. The tool costs 2.50 USD, is produced by local manufacturers and can be used collectively by farmers.[2] Harvesting early in the morning when air temperatures are cooler also helps to reduce energy requirements and cooling costs.
Activities such as ploughing, soil preparation, water lifting, pulling inputs and threshing require fewer skills but greater energy input and are hence mostly powered by draught animals such as buffalos, horses, donkeys, camels or oxen. Power output ranges from 200 W for a donkey for 4 hours daily work to over 500 W for a buffalo[3]. Draught animal power can alleviate human drudgery and is generally considered to be an affordable and sustainable source of power for smallholders, also given its great potential for diversification and expansion e.g. for transport and non-farm work. Efforts to expand the use of draught animal power should include work on animal efficiency, which can be improved through modernisation of equipment, better breeding and animal husbandry, feeding and veterinary care.
In sub-Saharan Africa (SSA), human effort contributes about 65 per cent of the power required for land preparation and subsequent weeding, the principal demand peaks in the farming cycle. An example comparison shows that a typical farm family relying solely on human power can cultivate only 1.5 hectares per year. This rises to 4 hectares if animal power is available and to over 8 hectares if tractor power can be accessed.[1] Transition to increased mechanisation of agricultural operations occurs using diesel or gasoline-powered tractors and harvesters. Fuel powered two-wheel tractors are often used for agricultural production, with different attachements for tillage, bed planting, row planting, harvesting and threshing. In Bangladesh, power tillers (12-15 hp) are used for about 70 per cent of farm work because of their versatility.[4] The fuel requirements for digging up root and tuber crops, e.g. of a potato digger are 0.57 gallons of diesel fuel per ton of product (1.96 litres/MT).[5] Energy use depends mostly on the speed at which activities are carried out. As tillage operations within arable farming systems often have the highest energy requirements and lead to soil degradation, the reduction of mechanical tillage is promoted by the approach of conservation agriculture (CA). In general, a four-wheel tractor will not be economically feasible for a smallholder with a typical land holding of up to 5 hectares. Government-run tractor hire schemes in SSA countries have not been able to increase farm productivity. On the other hand, the concept of a rental market for privately owned and operated tractors has potential that may increase in the future[1].
Besides direct energy demand in agriculture there are also indirect energy inputs in the form of sequestered energy in fertilisers, herbicides, pesticides, and insecticides, all of which require energy in their production, distribution and transport processes. Fertilisers form the largest of these energy inputs to agriculture, whilst pesticides are the most energy-intensive agricultural input (on a per kg basis of chemical)[6]. Need for these inputs however can be reduced by the use of farm-own organic manure or by agro-industry based bio-fertiliser production, e.g. generated from biogas plants (at household or industrial level). The promotion of locally produced organic fertiliser also has the advantage of avoiding the negative environmental impact of mineral fertilisers and benefits from the shorter distances required for distribution, thus reducing energy requirements and fuel costs.
Past experience in Asia indicates that the key factors driving mechanisation and consequently power for agricultural development are guaranteed markets and farm prices for key crops, favorable government policies and availability of credit. The example of India shows that favorable government policy and farmer demand have led to increased availability of appropriate and locally manufactured farm machinery and ultimately to India becoming the world‘s largest tractor manufacturer.[7] A very comprehensive comparison of Energy Use in Conventional and Organic Cropping Systems has been carried out by the National Sustainable Agriculture Information Service (ATTRA) of the US National Centre for Appropriate Technology (NCAT). The report shows, in a review of existing studies, that there are many complexities involved in comparing energy consumption in conventional and organic cropping systems. Certain research indicates that organic agriculture is more energy-efficient than conventional agriculture, but not in all cases. In some cases, organic agriculture may be more energy-intensive, depending on the specific farming operation, the crop produced and the post-production handling. It is important to assess the energy-intensiveness of food systems in a holistic manner that incorporates energy consumption for the entire life cycle of the food product.[8]
►Go to Top
Irrigation
Access to water is a major determinant of land productivity and active water management through irrigation offers an important opportunity to stabilise yields. Irrigation is therefore of the utmost significance in the agricultural production process and this chapter is consequently accorded great importance. Irrigated land productivity is more than double that of rainfed land. In sub-Saharan Africa, only 4 per cent of the area in production is under irrigation, compared with 39 per cent in South Asia and 29 per cent in East Asia.[9] With growing water scarcity and costs of large-scale irrigation schemes rising, there is a need to enhance productivity by improving existing schemes, expanding small-scale schemes and developing water harvesting. Irrigation‖ refers to the distribution of water for growing crops, including the use of water storage and pumping, where appropriate. The energy demand for irrigation purposes is the energy required to lift water by pumping from surface sources, such as ponds, streams, or canals; or from below-ground sources using open wells or boreholes. This water is typically pumped to surface canals, reservoirs, or elevated tanks. The energy demand for water lifting is calculated by multiplying the head (the vertical distance from the water source to the field in metres) by the volume of water to be raised in cubic metres (m3). Pumping energy needs are typically expressed in units of m4.
Decisions about energy and irrigation should be made on the basis of three key sequential steps[10]:
- Choosing the right irrigation technology: understanding the irrigation system needs for a given context,
- Choosing the right pump technology: understanding the various pumping technologies available,
- Choosing the right energy source: assessing which power sources are possible, desirable, and locally available to provide the necessary energy for that system.
Choosing the Right Irrigation Technology
The question of which irrigation water distribution system is most suitable will depend on several factors including the crop(s) cultivated, climate, location, scale/area of agricultural production, quantity of water required over time, system cost, access to capital, local agricultural workers‘ technical capacity, local availability of equipment, maintenance and repair services and availability of spare parts. Irrigation systems differ in their peak and average water requirements, the need for water storage (e.g. tanks, cisterns), and the ultimate need for pumping and energy. Where small producers (<two hectares) are targeted, the more expensive irrigation technologies may only be accessible through membership of cooperatives and farmers‘ associations, who have sufficient ability to raise capital, as well as having the management capacity for technology adoption, operation, maintenance, and replacement. The reliability of the selected irrigation system and the ability of its maintenance is of primary importance for farmers.
| Irrigation system | Technology | Advantage | Disadvantages |
| Manual irrigation | Using buckets or watering cans | Low infrastructure and technical equipment requirements | High labour inputs |
| Surface irrigation | Water moves over and crosses the land by gravity flow; water level can be controlled by simple soil dams; water in ditches can be pumped or lifted by human or animal power to the level of the field. | Low cost and simple technology | Inefficient use of water, potentially high evaporative losses, can lead to increased soil salinity |
| Sprinkler/ overhead irrigation |
Piping water to one or more central locations within the field and distributing it by high-pressure sprinklers or guns. Numerous system types exist, including centre pivot, rotating, traveling/water-wheel, lateral move/side roll/wheel line. | Potential labour savings and more efficient use of water than in surface irrigation. | These systems can be expensive and require technical capacity to operate and maintain. |
| Drip irrigation/Micro irrigation | Delivers water directly at or near the root zone of plants, drop by drop. | Highly water-efficient method of irrigation, since evaporation and runoff are minimised (also reduces chemical input if required); any pumps can be used; saves labour; lower water pressure and energy use are required compared to other automated systems. | Difficult to regulate the pressure in sloped sites; system maintenance can be higher than other irrigation systems (if water has to be filtered to remove particles that may close the tubes); the system can be fairly costly to install, esp. higher end automated technologies (although some very low cost models exist which require much more labour). |
In general, the scale of production, costs of the technology and organisational capacity of the farmers will drive decisions about which irrigation approach to use. The size, cost, and capacity of suitable technologies increase along with the scale of production. The following table provides some guidance for the selection of irrigation technologies based on key criteria such as production scale, energy source, and budget.
| Irrigation Method | Irrigated Area | Water Requirements | Energy Requirements | Capital Cost | Operating Cost |
| Manual | <0.5 ha | Low to High | Low (manual only) |
Low | Low to Medium |
| Surface / Gravity fed |
Unlimited | High | Low (manual only) |
Medium | Low |
| Sprinkler | Unlimited | Medium | High | High | High |
| Drip / Micro-irrigation | Unlimited | Low | Medium | High | Medium |
Choosing the Right Pump Technology
There are a wide variety of pump technologies available for irrigation, but not all are appropriate for every type of irrigation system. Pumps differ in their pumping approach, size and capacity, the type of water source they are suitable for (groundwater or surface water), the scale/area of irrigation possible, their cost and technical complexity. Pumps can be classified into three categories: hydraulic, manual or motorised. The table below offers guidance regarding the most appropriate type of water pump, given the area to be irrigated, combined with the water table depth.
| Irrigated Area | Water Table < 8 m | Water Table > 8 m |
| < 2 ha | Manual Pump: Hand pump Treadle pump (~ 1 pump/0.5 ha)Motorised Pump 3 – 5 hp mechanical pump < 5 hp electric pump |
Motorised Pump: 3 – 5 hp mechanical pump (submersile only) < 5 hp electric pump (submersible only) |
| 2 - 4 ha | Motorised Pump: > 5 hp mechanical pump > 5 hp electric pump |
Motorised Pump: 3 – 5 hp mechanical pump (submersile only) < 5 hp electric pump (submersible only) |
| > 4 ha | Motorised Pump: > 5 hp mechanical pump > 5 hp electric pump |
Motorised Pump: 3 – 5 hp mechanical pump (submersile only) < 5 hp electric pump (submersible only) |
Choosing the Right Energy Source
Different pump technologies are often flexible regarding the type of energy source powering them. There follows an overview of the different energy sources available for motorised pumping, and the definition and characteristics of each.
Grid Electricity
Where grid connection is available an electric pump can be powered directly. However, the cost, availability, reliability, and quality of local electricity supplies determine the use of this energy source. ►Go to Top
Fuels for Combustion Engines
Motorised pumps can be powered by fossil fuels (diesel, gasoline), either through generators that create electricity, or by transmitting power to the pump through a drive belt and vertical rotating shaft. In addition, some submersible pumps (i.e. progressing cavity pumps) operate by direct displacement, like piston pumps. The pumps tend to be more expensive but nevertheless more efficient than centrifugal pumps. The use of biofuels (plantoil, biogas) is still limited. A few experiments are underway, e.g. in India with biofuels made from local oilseeds[4], in the GIZ PSDA program in Kenya with biogas[11] and in Nepal, where Winrock International is supporting community-grown jatropha oil for irrigation pumps[12].
►Go to Top
Solar Energy (PV)
see Photovoltaic (PV) Pumping
►Go to Top
Wind Energy
Wind can be used to power both mechanical and electric pumps. Mechanical wind-powered pumps use reciprocal non-motorised submersible pumps and require wind speeds of 2.5 m/s minimum up to 4 m/s optimum. Capacity is much lower than for motorised centrifugal pumps, in the range of 1 m3/hr at depths of 20 metres or more.
Mechanical wind pumps require the availability of local maintenance and repair facilities to be able to respond quickly to mechanical failures. Adequate wind speeds must be present at the location of the wells. One advantage is that they can pump day or night as long as there is sufficient wind, and can be used independently of electricity or fuel supplies. A disadvantage is that they must be located directly above the well, a location that may not be optimal in terms of local wind resources. Wind pumps are appropriate in windy areas without other sources of power, and only for small irrigable areas.
Wind electric turbines convert the kinetic energy of the wind into rotational mechanical energy that drives a generator to produce electricity, e.g. for pumping water for irrigation. Windmills are positioned for optimal wind conditions, providing greater site flexibility and in addition facilitating electricity production for other uses. Water-pumping applications generally make use of wind turbines with rated output between 1 kWe and 10 kWe. A wide variety of small wind electric turbines is commercially available, with rated outputs ranging from a few tens of watts to 100 kilowatts, and is used worldwide to provide electricity in locations where alternatives are unavailable or are too expensive or difficult to provide.
►Go to Top
Hybrid Systems
Small-scale hybrid power systems, also a mature technology, are used worldwide. By combining different energy sources (solar-diesel, wind-diesel) hybrids can provide widespread and highly reliable electrical supply. These small hybrid systems are easy to install—no special tools or concrete are required.
►Go to Top
Further Information
- Irrigation on Powering Agriculture Portal
- Solar Powered Irrigation Systems - Technology, Economy, Impacts
Post-harvest and Storage
Packing
The best precondition for storage is a proper harvest and post-harvest handling. Sorting, grading, and packing produce into storage containers after harvest to prevent losses is important, especially for easily perishable crops such as tuber crops, vegetables and fruits. Reducing the number of times produce is handled between harvest and consumption will reduce mechanical damage and subsequent losses. Packing houses for crops are often simple structures that provide shade and comfortable working conditions for farm workers conducting manual post-harvest operations. Manual handling is recommended for horticultural high-value produce.
►Go to Top
Storage
A certain percentage of the farm produce has to be stored before selling at the market, because production is seasonal while demand, particularly for vegetables and fruits, continues year-round. Storage facilities secure agricultural commodities kept for rapid emergency aid and buffer stocks to stabilise domestic prices. Besides storage at central hubs and transportation centres, more localised storage is often necessary.
►Go to Top
Dry Storage
To achieve increased production, traditional village stores need to be improved within the means of smallholders to achieve a certain transition to larger and more modern storage systems.[13] This requires the management of dry storage facilities, mainly for post-harvest and storage of grain (maize, sorghum, millet, wheat and rice), pulses (beans, peas), roots and tuber crops, and oilseeds, whereas fruits and vegetables require cold storage facilities. For grain, pulses and oil seeds, mechanical damage mostly occurs during harvesting, transport and processing, while insects, mold and rodents damage produce during storage. For such staple foods, energy input or expensive technology is generally. Good storage practice is the key to maintaining quality and value throughout the storage season. A precondition is that crops are in good condition prior to storage, which means well cleaned and carefully winnowed to remove live adult insects. Straw, chaff, weed seeds, stones and dirt must also be removed, as they hold water and their removal will allow grain to dry faster. The grain should be well dried to an appropriate level of moisture content. Good drying is essential because damp grain will become moldy and spoil. Solar dryers can be used—sun drying will also help get rid of adult insects in the grain. However, as sun drying will not kill all immature stages, such as larvae living inside grains, it is sometimes necessary to treat the grain with insecticide, thus killing the immature stages once they mature and emerge from the grain as adults. Maize is often shelled by hand. This produces better quality grain but is a very slow process. Quicker and effective shelling can be achieved using a variety of mechanical operated machines. The grain must be sufficiently dry both for these and for safe storage. A good store will keep the grain dry and cool and provide protection against rodents and birds. Practising good store hygiene—keeping everything as clean as is practically possible—helps maintain the condition of the crop and the store throughout the storage season. As pests can attack the store at any time, it is important to inspect the store and crop regularly. There are many appropriate technologies and traditional methods for preventing post-harvest losses, varying from location to location. Dry storage facilities range from small-scale, on-farm storage to medium and large-scale facilities of several hundred of tons or more.
►Go to Top
Cold Storage
Cold storage in tropical and subtropical climates can generate high energy demand. In general, the initial cooling, processing and cold storage of fresh fruit and vegetables is among the most energy-intensive activities of the food industry. However, for fresh fruits and vegetables, cooling is also one of the most important steps in the post-harvest handling chain to reduce respiration rates, extend shelf life and protect quality. Deterioration of fruits and vegetables during storage depends largely on temperature, so the temperature must be lowered to an appropriate level, to avoid damage and increase the length of storage time. Controlled temperature storage is a critical factor for most perishable agricultural products and a consistent cold chain is necessary to maintain the quality of many high-value agricultural products. Cooling also offers farmers the opportunity to increase income by extending the period for selling and marketing the products when better prices can be achieved. In developing countries, refrigeration in rural areas must often be operated without reliable electricity supply and the provision of a cold chain or store rooms for cooling bigger quantities of produce is often impossible. Three technologies are available for cooling smaller quantities of produce:
- Passive/evaporative coolers: where temperatures between 10-25°C are needed, no energy input is required.
- Absorption refrigerators (heat driven coolers (HDC), requiring temperatures below 10°C; heat as an energy source is used to drive the cooling system (e.g. solar, kerosene-fueled flame)[14].
- Refrigerators, which are electrically driven, use mechanical compression technology. Refrigeration is dependent on a reliable and continuous supply of electricity which can be generated from different sources: from the grid, diesel powered compressor, mechanical power generated from a water turbine, by solar energy converted by solar cells into electricity stored in batteries or by solar energy and evaporation.[15]
Commercial PV-powered refrigerators were introduced in developing countries to cut down the use of kerosene or gas-powered absorption refrigerators, which are the most common alternatives but also those with the most negative impact on the environment. First introduced for medical refrigeration they now also constitute an alternative method of storing small quantities of agricultural products for sale. The newest type of solar refrigerator is solar powered but requires neither solar panels nor a battery as it functions on the principle of evaporation. Solar photovoltaic power for refrigerators has great potential for lower running costs, greater reliability and a longer working life than kerosene refrigerators or diesel generators. A life-cycle cost analysis has shown that the costs are approximately the same for solar and kerosene refrigerators, but because they are more reliable and environmentally friendly, solar refrigerators are the preferred option. [16]
| Categories | Commodities/Technologies | Energy Sources |
| Low tech (<5 kWh/day) |
Field packing of leafy, stem, or fruit vegetables, root, tuber and bulb crops, fruits and berries | Electric grid; Solar power with battery back-up |
| Basic tech (5 to 25kWh/day) |
Packinghouse operations and pre-cooling for tropical and subtropical fruits and vegetables; Evaporative cool storage. (Temperature range 15°C to 20°C) | Solar water heater, Electric grid; Generator (diesel or gas); Hybrid PV/ Generator systems with battery back-up |
| Intermediate tech (25 to 100 kWh/day) |
Cooling and cold storage for temperate fruits and vegetables. (Temperature range 0°C to 7°C) | Electric grid; Generator (diesel or gas) |
| Modern tech (> 100 kWh/day) |
Automated packinghouse operations, pre-cooling and cold storage for any kind of fruits and vegetables. (Temperature range down to 0°C) | Electric grid; diesel back-up generators |
Processing
Drying of Produce
To add value to fresh fruits and vegetables, they must be dried before packaging and marketing. Drying of fresh produce, which contains up to 95 per cent water, to a safe moisture content of 7-8 per cent requires the application of low heat and ventilation for best results. Processing fruits and vegetables on a small-scale level is therefore less mechanised than other agro-processing activities. It is important that the used equipment is constructed of stainless steel because acids in fruits corrode mild steel. Peeling, cutting, or slicing produce into uniformly sized pieces is usually required for successful drying. This is typically done by hand. Machines are available for larger quantities and can speed up the peeling, cutting, or slicing of produce. For drying commodities (e.g. tea, coffee, copra or abaca) in larger quantities, heat assisted drying is used, with many different types of dryer available.
►Go to Top
Direct and Indirect Solar Drying
Laying produce out in the sun to dry naturally is common in sunny climates and is a very inexpensive drying method. It is still the predominant method for producing raisins worldwide. However, traditional sun drying methods often yield low quality as the produce is not protected against rain and dust and other contaminations.
Indirect solar drying requires a covered dryer that protects produce from direct sunlight while capturing more heat from the sun. With natural air flow inside, an indirect dryer reduces heat and pest damage while speeding up drying.
►Go to Top
Heat-assisted Drying
In rainy weather regions or humid locations, heat-assisted dryers create warm air flow inside the dryer to speed up drying. Heat sources may be electric, propane, wood, or any other locally available fuel. Appropriate drying temperatures can easily be achieved with low-powered, relatively inexpensive technologies. The majority of energy used in heated air dryers is actually used to heat the air. Electricity for moving air is only a small fraction of the air heating costs, which depend on the initial and final moisture contents of the product. If energy conservation measures such as air recirculation are incorporated into the operation, fuel use can drop significantly.[5]
►Go to Top
Solar Drying
Cereal Milling
Peanut Value Chain - Example and Experiences from Bolivia
Edible Oil Extraction
Edible oil is a high-value product for generating income. The main crops for oil extraction are nuts, e.g. groundnut, shea nut, coconut, palm kernel, oil seeds (e.g. sesame, sun flower, mustard seed) and oil palm fruit. By-products of oil seeds include press cake with high protein and nutrient contents for animal feed, whereas the by-products of coconut and groundnuts are for human consumption. Both generate additional income for farmers. The by-products of agro-industrial oil mills are used in biogas digesters for electricity generation or generation of process heat or steam.
There are many hand-operated technologies for pressing oil (spindle press), hydraulic presses or engine driven oil presses. There is huge demand for mechanical power alternatives to reduce drudgery for humans. Researchers and development specialists working with Appropriate Technology International (ATI) have developed a method to introduce small-scale oil expelling enterprises to rural areas in Africa. A typical set-up consists of a ram press for extracting the oil, a filtration device, tools for maintenance, and perhaps most importantly, training, support and information on the proper use of the oil and cake (the residue of the seeds after the oil has been squeezed out), and the socioeconomic and nutritional benefits of an oilseed processing enterprise. The ram press, driven manually by a long handle, consists of a small piston that presses a measured load of oilseeds into a metal cage. The basic design was developed in Tanzania in 1985 by Carl Bielenberg of ATI. The original and improved versions are now widely used there, as well as elsewhere in Africa. The dry process of extracting oil cannot be executed only by mechanical or hydraulic presses, but also by continuously operating screw presses, known as oil expellers. Expellers are usually driven by petrol or diesel engines or electric motors but can also be run on animal or water power.
A small motorised expeller, named KOMET, is being manufactured by IBG Montforts + Reiners, Moenchengladbach, Federal Republic of Germany. Large sized material, such as copra or palm kernels, must be crushed into pieces of about 5 mm diametre. The standard power source is a 3 kW electric motor with stepless variable gearbox. Alternatively the unit can be driven by a diesel engine (11 kW at 3000 rpm), equipped with a dynamo and clutch. In general, in Asia, Latin America and Africa there are large numbers of processing equipment and machinery manufacturers. However, investment in research and development (R&D) is required to upgrade traditional small-scale technologies. In sub-Saharan Africa for example, the use of rudimentary technologies for processing millet, sorghum and other local cereals has led to increased dependence of the growing urban population on imported wheat and rice. Critical factors for sucessful processing activities are also access to raw materials, inputs such as packaging materials, machinery and spare parts and qualified human resources[7].
►Go to Top
Commercialisation
Market Infrastructure and Transport
Continued provision of safe and nutritious food at affordable prices will require increased food production, effective rural-to-urban market linkages and efficient support services. Storage facilities to minimise post-harvest losses and reduce health risks can solve logistical, food safety and marketing problems. Agro-processing extends markets to meet increased food demands. The energy input in storage and processing facilities has been described above. Investment in rural power supply facilities is a requirement for infrastructure improvement in general, not only for marketing. Rural infrastructure design must enable smallholders to access local markets easily and reduce input costs such as transport and distribution. Manual technologies for transportation consist largely of animal-powered vehicles, carts, or wagons. Fossil fuel-powered or biofuel-powered engines for transport cars or pick-up trucks offer the most frequently used mode of transportation.
►Go to Top
Information and Telecommunication Technologies (ICT)
Market information is crucial to enable farmers and traders to make informed decisions about what to grow, when to harvest, to which markets produce should be sent and whether or not to store it. Moderninformation and communication technologies (ICT) open up possibilities for market information services to improve information delivery through SMS on cell phones and the rapid growth of FM (frequency modulation, a broadcast technology) radio stations offer more localised information services. Mobile phones also reduce communication and information costs significantly by reducing travel distances. In India a study found that the expansion of mobile phone coverage led to a significant reduction in consumer prices (4 per cent) while at the same time fishermen‘s profits increased by 8 per cent[17]. In the long run, the internet may become an effective way of delivering information to farmers. PV-powered cell phones, PV-powered satellite phone kiosks (as in the case of Bangladesh-Grameen Shakti operations) have a typical power peak of 0.2-0.3 kW and include a 50 Wp system with 2 lights and a socket to charge cellular phone batteries.
►Go to Top
Training Facilities
Training facilities for farmers, traders and others in the various chains increase understanding of the social, technical, economic and environmental factors that affect the safety, quality and value of agricultural production and marketing. Providing buildings with power, including renewable energies such as solar lighting or energy-efficient construction materials, will help them to function as a model for modern energy services. For example, farm lighting (including security and safety of scattered buildings) with PV/ battery system) requires a power supply in the range of 50-500 watts. Computer equipment for training requires 8-300 Wp systems in addition to powering lights, fax, TV, etc. Internet servers for e-commerce are mostly integrated in a multifunctional solar facility (1 kW).
►Go to Top
Selling
Efficient marketing infrastructure such as assembly markets, retail markets and wholesale markets is essential for cost-effective marketing. Terminal wholesale markets are located in major metropolitan areas, where produce is finally channelled to consumers through trade between wholesalers and retailers, caterers, etc. The characteristics of wholesale markets have changed considerably as retailing changes in response to urban growth, the increasing role of supermarkets and increased consumer spending capacity. These changes require responses in terms of how traditional wholesale markets are organised and managed. Despite the growth of supermarkets, there remains considerable scope to improve agricultural marketing in developing countries by constructing new retail markets. Rural assembly markets are located in production areas and serve primarily as places where farmers can meet with traders to sell their products. These markets may be occasional (perhaps weekly) or permanent, often taking place at night or in the early morning when lighting is needed. If there is no connection to the public grid, use of solar lanterns can be an alternative. PV rechargeable fluorescent lanterns range between 10 and 20 watts per lantern.
►Go to Top
Downloads
- Modern Energy Services for Modern Agriculture - A Review of Smallholder Farming in Developing Countries (GIZ-HERA, 2011)
- Empowering Agriculture - Energy Options for horticulture, (USAID, 2009)
Further Information
- Productive Use Portal on energypedia
- Water and Energy for Food (WE4F) portal on energypedia
- Agricultural Processing
- FAO Study: Opportunities for Agri-Food Chains to become Energy-Smart
- Water and Energy for Food, Feed and Fiber
- Sheabutter Processing in Benin
- Energy input in the Maize value chain in Benin
- Fact Sheet: Mini-grids and Agriculture
References
- ↑ 1.0 1.1 1.2 FAO (2006), Sims, B. and J. Kienzle. Farm power and mechanisation for small farms in sub-Saharan Africa, Rome.
- ↑ Appropriate Technology (2010), Vol 37, No 2., page 66-67, www.appropriate-technolog.org/www.ciat.cgiar.org
- ↑ FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTML
- ↑ 4.0 4.1 UNDP and Practical Action (2009), Expanding Energy Access in Developing Countries - The Role of Mechanical Power. http://practicalaction.org/docs/consulting/UNDP_Mechanical_Power.pdf
- ↑ 5.0 5.1 USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html
- ↑ FAO (2000), The Energy and Agriculture Nexus. Environment and Natural Resources Working Paper No. 4, Rome. http://www.fao.org/docrep/003/x8054e/x8054e00.HTM
- ↑ 7.0 7.1 FAO (2009a), Golob, P. et al: On-farm post-harvest management of food grains, Rome.
- ↑ Hill, H. et al. (2009), Comparing Energy Use in Conventional and Organic Cropping Systems, NCAT Program, ATTRA, IP339, Slot 337, Version 051409. USA. http://attra.ncat.org/attra-pub/croppingsystems.html
- ↑ World Bank (2007), World Development Report 2008: Agriculture for Development. (Report 41455). http://go.worldbank.org/BVIMU1PI60
- ↑ most of the Irrigation chapter is based on: USAID (2009), Empowering Agriculture – Energy Options for Horticulture. http://www.usaid.gov/our_work/economic_growth_and_trade/energy/index.html
- ↑ GTZ/HERA (2010b), (Poverty-oriented Basic Energy Services), Dimpl, E. and M. Blunck. Small-Scale Electricity Generation from Biomass – Part II: Biogas. www.gtz.de/hera.
- ↑ Energia (2009), Karlsson, G. and B. Khamarung Biofuels for sustainable rural development and empowerment of women. Case studies from Africa and Asia, p. 25-28.
- ↑ FAO (2009b), Investing in Food Security, Agriculture and Consumer Protection Department, Rome. www.fao.org/ag/portal/ag-home/en
- ↑ Green Cooling Initiative -Double Effect Absorption Chiller. Website: http://bit.ly/1LfePrw
- ↑ Practical Action (2010a), Technical Brief - Solar Photovoltaic refrigeration of vaccines. UK. www.practicalaction.org
- ↑ Practical Action (2010b), Technical Brief - Refrigeration for Developing Countries. UK. www.practicalaction.org
- ↑ GTZ (2010), Lucante, P. The Impact of Information and Communication Technologies (ICT) on Economic Growth and Development, Sector Project ICT for Development.
