Difference between revisions of "Solar Milk Cooling with Insulated Milk Cans"

From energypedia
***** (***** | *****)
m (Undo revision 277456 by Kilian Blumenthal (*****))
***** (***** | *****)
m
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  
= Introduction<br/> =
+
== Introduction ==
  
 
In many countries, milk is exclusively produced by small and medium sized dairy farms with daily milk output below 200l. Their milk is in most of the cases transported to milk collection facilities, without any form of cooling. In addition, lack of hygiene and cleaning procedures and problems with cattle health are the most common reasons of high bacterial growth during short-term storage of milk on the farm and during transportation.
 
In many countries, milk is exclusively produced by small and medium sized dairy farms with daily milk output below 200l. Their milk is in most of the cases transported to milk collection facilities, without any form of cooling. In addition, lack of hygiene and cleaning procedures and problems with cattle health are the most common reasons of high bacterial growth during short-term storage of milk on the farm and during transportation.
Line 12: Line 12:
 
<br/>
 
<br/>
  
= Hohenheim System for On-farm Milk Cooling with Solar Energy<br/> =
+
 
 +
== Hohenheim System for On-farm Milk Cooling with Solar Energy ==
  
 
[[File:Solar Milk Cooling System.JPG|center|800px|Milk Cooling System of the University of Hohenheim|alt=Milk Cooling System of the University of Hohenheim]]
 
[[File:Solar Milk Cooling System.JPG|center|800px|Milk Cooling System of the University of Hohenheim|alt=Milk Cooling System of the University of Hohenheim]]
Line 18: Line 19:
 
<br/>
 
<br/>
  
The milk cooling solution developed by the University of Hohenheim is based on a commercially available DC refrigerator, equipped with an adaptive control unit for its conversion to a smart ice-maker. It operates depending on the availability of solar energy.
+
The milk cooling solution developed by the University of Hohenheim is based on a commercially available DC refrigerator, equipped with an adaptive control unit for its conversion to a smart ice-maker. It operates depending on the availability of solar energy. [[Do_It_Yourself_-_Solar_Cooling_Units|Do it yourself - solutions]] for solar ice making are also possible.  
  
 
Cylindric tins are used for the production of ice, which is then put into the ice-compartment of the Insulated Milk Can. Depending on the amount of milk and ice, different cooling temperatures and storage times are reached.
 
Cylindric tins are used for the production of ice, which is then put into the ice-compartment of the Insulated Milk Can. Depending on the amount of milk and ice, different cooling temperatures and storage times are reached.
Line 33: Line 34:
 
One system includes 24 reusable plastic blocks of 2 kg capacity and two 30l insulated milk cans with removable ice compartment. The smart ice-maker is powered by 600 Wp solar PV modules together with two batteries with a total capacity of around 1.5 kWh. Thanks to the thermal energy storage, in form of the 24 2 kg-Ice-blocks, the system is able to run autonomously for up to 5 days even during periods of low solar radiation and high ambient temperatures.<ref name="2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.">2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.</ref>
 
One system includes 24 reusable plastic blocks of 2 kg capacity and two 30l insulated milk cans with removable ice compartment. The smart ice-maker is powered by 600 Wp solar PV modules together with two batteries with a total capacity of around 1.5 kWh. Thanks to the thermal energy storage, in form of the 24 2 kg-Ice-blocks, the system is able to run autonomously for up to 5 days even during periods of low solar radiation and high ambient temperatures.<ref name="2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.">2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.</ref>
  
<br/>
+
== Ice-Maker with Adaptive Control Unit<ref name="Design and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit">2016 Victor Torres-Toledo, Klaus Meissner, Philip Täschner, Santiago Martınez-Ballester, Joachim MüllerfckLRDesign and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit. fckLRSolar Energy Journal Publication.fckLRhttp://dx.doi.org/10.1016/j.solener.2016.10.022</ref>==
 
+
[[File:Refrigeration_adapted_to_solar_energy_availability.png|alt=|right|180x180px]]
= Ice-Maker with Adaptive Control Unit<ref name="Design and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit">2016 Victor Torres-Toledo, Klaus Meissner, Philip Täschner, Santiago Martınez-Ballester, Joachim MüllerfckLRDesign and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit. fckLRSolar Energy Journal Publication.fckLRhttp://dx.doi.org/10.1016/j.solener.2016.10.022</ref><br/> =
 
 
 
[[File:Refrigeration adapted to solar energy availability.png|thumb|180px|Performance of the refrigerator with adaptive control unit]]
 
 
 
 
The implemented adaptive control unit allows the efficient use of conventional DC-Refrigerators for an intensive and reliable production of ice all over the year. The ice-maker is equipped with following features:
 
The implemented adaptive control unit allows the efficient use of conventional DC-Refrigerators for an intensive and reliable production of ice all over the year. The ice-maker is equipped with following features:
  
Line 47: Line 44:
 
*Storage of 50 kg ice blocks to assure a autonomy of at least 5 days under low radiation or high ambient temperatures.<br/>
 
*Storage of 50 kg ice blocks to assure a autonomy of at least 5 days under low radiation or high ambient temperatures.<br/>
  
<br/>
+
[[File:ACU in Handle.png|thumb|370px|Adaptive control unit installed in the handle of the refrierator|alt=ACU in Handle.png|left]] [[File:Fan in refrigerator.png|thumb|370px|Fan in the refrigerator for uniform temperature distribution|alt=Fan in refrigerator.png|none]]
 
 
[[File:ACU in Handle.png|thumb|left|370px|Adaptive control unit installed in the handle of the refrierator|alt=ACU in Handle.png]] [[File:Fan in refrigerator.png|thumb|right|370px|Fan in the refrigerator for uniform temperature distribution|alt=Fan in refrigerator.png]]
 
  
<br/>
 
  
= Insulated Milk Cans =
+
== Insulated Milk Cans ==
  
 
The milk-cans implemented are made of stainless-steel and have a capacity of 30 liter milk and 8 kg Ice. This allows a flexible use of them depending on the cooling requirements. The milk-can has been design to operate for two modes as described in following table.
 
The milk-cans implemented are made of stainless-steel and have a capacity of 30 liter milk and 8 kg Ice. This allows a flexible use of them depending on the cooling requirements. The milk-can has been design to operate for two modes as described in following table.
Line 104: Line 98:
 
<br/>The cooling performance and bacterial growth were measured with real milk under lab conditions in a climate chamber. On-field milk quality assessments are currently carried out in order to confirm the potential of the system to retard bacterial growth depending on milk temperature and transport time under real working conditions.<ref name="2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.">2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.</ref><br/>
 
<br/>The cooling performance and bacterial growth were measured with real milk under lab conditions in a climate chamber. On-field milk quality assessments are currently carried out in order to confirm the potential of the system to retard bacterial growth depending on milk temperature and transport time under real working conditions.<ref name="2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.">2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.</ref><br/>
  
<br/>[[File:Milk cooling curve.png|thumb|center|600px|Cooling curves of milk under different ambient temperatures and with different loads of ice and milk|alt=Milk cooling curve.png]]
+
<br/>[[File:Milk cooling curve.png|thumb|600px|Cooling curves of milk under different ambient temperatures and with different loads of ice and milk|alt=Milk cooling curve.png|left]]
  
 
<br/>
 
<br/>
  
[[File:Milk cans with ice compartment.JPG|thumb|left|370px|Metal and plastic version of milk can with ice compartments|alt=Milk cans with ice compartment.JPG]] [[File:Overview of milk can components.JPG|thumb|right|370px|Tins for ice production, ice compartment, milk can and insolation jacket|alt=Overview of milk can components.JPG]]
+
[[File:Milk cans with ice compartment.JPG|thumb|370px|Metal and plastic version of milk can with ice compartments|alt=Milk cans with ice compartment.JPG|none]] [[File:Overview of milk can components.JPG|thumb|370px|Tins for ice production, ice compartment, milk can and insolation jacket|alt=Overview of milk can components.JPG|none]]
  
 
&nbsp;
 
&nbsp;
  
<br/>
+
== On-Field Implementations ==
 
 
<br/>
 
 
 
= On-Field Implementations<br/> =
 
  
 
In order to evaluate the potential of solar milk cooling systems under real conditions, on-field projects have been implemented in the following countries:<br/>
 
In order to evaluate the potential of solar milk cooling systems under real conditions, on-field projects have been implemented in the following countries:<br/>
Line 149: Line 139:
 
<br/>
 
<br/>
  
= Collaboration Partners<br/> =
+
== Collaboration Partners ==
  
 
Research and Development:
 
Research and Development:
Line 174: Line 164:
 
*[http://research4agrinnovation.org/ PARI - Program of Accompanying Research for Agricultural Innovation]
 
*[http://research4agrinnovation.org/ PARI - Program of Accompanying Research for Agricultural Innovation]
  
<br/>
+
<br />
  
<br/>
+
== Publications and Documents ==
 
 
= Publications and Documents =
 
  
 
*[[:File:Techsheet A3 solar milk cooling V3.0.pdf|Technology sheet on solar milk cooling]]<br/>
 
*[[:File:Techsheet A3 solar milk cooling V3.0.pdf|Technology sheet on solar milk cooling]]<br/>
Line 191: Line 179:
 
<br/>
 
<br/>
  
<br/>
+
== Overview of Solar Milk Cooling Systems ==
 
 
= Overview of Solar Milk Cooling Systems =
 
  
 
*[[Solar Milk Cooling|Solar Milk Cooling]]
 
*[[Solar Milk Cooling|Solar Milk Cooling]]
 +
*[[Do_It_Yourself_-_Solar_Cooling_Units|Do It Yourself - Solar Cooling Units]]
 +
  
= References =
+
== References ==
  
 
<references /><br/>
 
<references /><br/>

Latest revision as of 12:51, 11 June 2024

Introduction

In many countries, milk is exclusively produced by small and medium sized dairy farms with daily milk output below 200l. Their milk is in most of the cases transported to milk collection facilities, without any form of cooling. In addition, lack of hygiene and cleaning procedures and problems with cattle health are the most common reasons of high bacterial growth during short-term storage of milk on the farm and during transportation.

Under warm climatic conditions, milk can exceed the maximum bacterial count prescribed by food safety laws after about two to five hours. During the hottest periods of the year, lack of quality can lead to high rates of refused milk at collection centers or dairy plants. Furthermore, due to low production volumes, evening milk is often not collected year round, thus causing additional on-farm losses. Small-scale solar powered milk cooling technologies can support the milk value chain at farm, cooperative and collecting center level by increasing productivity and giving access to price premiums and to additional markets.





Hohenheim System for On-farm Milk Cooling with Solar Energy

Milk Cooling System of the University of Hohenheim


The milk cooling solution developed by the University of Hohenheim is based on a commercially available DC refrigerator, equipped with an adaptive control unit for its conversion to a smart ice-maker. It operates depending on the availability of solar energy. Do it yourself - solutions for solar ice making are also possible.

Cylindric tins are used for the production of ice, which is then put into the ice-compartment of the Insulated Milk Can. Depending on the amount of milk and ice, different cooling temperatures and storage times are reached.

Volume refrigerator 160 l
Daily ice production 16 kg

One system includes 24 reusable plastic blocks of 2 kg capacity and two 30l insulated milk cans with removable ice compartment. The smart ice-maker is powered by 600 Wp solar PV modules together with two batteries with a total capacity of around 1.5 kWh. Thanks to the thermal energy storage, in form of the 24 2 kg-Ice-blocks, the system is able to run autonomously for up to 5 days even during periods of low solar radiation and high ambient temperatures.[1]

Ice-Maker with Adaptive Control Unit[2]

The implemented adaptive control unit allows the efficient use of conventional DC-Refrigerators for an intensive and reliable production of ice all over the year. The ice-maker is equipped with following features:

  • Variable compressor speed in dependence of solar radiation and state of charge of the batteries.
  • Operation of a fan in the inner chamber in order to increase freezing rate.
  • Energy saving mode during night and rainy days.
  • Use of batteries to increase daily ice production up to 30%.
  • Storage of 50 kg ice blocks to assure a autonomy of at least 5 days under low radiation or high ambient temperatures.
ACU in Handle.png
Adaptive control unit installed in the handle of the refrierator
Fan in refrigerator.png
Fan in the refrigerator for uniform temperature distribution


Insulated Milk Cans

The milk-cans implemented are made of stainless-steel and have a capacity of 30 liter milk and 8 kg Ice. This allows a flexible use of them depending on the cooling requirements. The milk-can has been design to operate for two modes as described in following table.


 

30 Liter milk + 6kg Ice

20 Liter milk + 8kg Ice

Cooling temperature

17°C after 90 min.

Under 10°C after 150 min.

Used for

Transport of morning milk

Storage of evening milk

Milk quality preservation

At least 6 hours

At least 12 hours


The cooling performance and bacterial growth were measured with real milk under lab conditions in a climate chamber. On-field milk quality assessments are currently carried out in order to confirm the potential of the system to retard bacterial growth depending on milk temperature and transport time under real working conditions.[1]


Milk cooling curve.png
Cooling curves of milk under different ambient temperatures and with different loads of ice and milk


Milk cans with ice compartment.JPG
Metal and plastic version of milk can with ice compartments
Overview of milk can components.JPG
Tins for ice production, ice compartment, milk can and insolation jacket

 

On-Field Implementations

In order to evaluate the potential of solar milk cooling systems under real conditions, on-field projects have been implemented in the following countries:


Country Project duration Number of installed systems More information
Tunisia July 2015 until December 2017 10 here
Kenya January 2016 until May 2018 4 here
Colombia October 2017 until May 2018 4 here



Collaboration Partners

Research and Development:

Agricultural Engineering in the Tropics and Subtropics (University of Hohenheim)

Commercialization:

Phaesun GmbH

Field Assessments:

  • International Center for Agricultural Research in the Dry Areas (ICARDA)
  • Tunisian Ministry of Agriculture (INRAT, OEP, CRRA-IRESA, Groupment Interprofessionnel des Viandes Rouges et du Lait, National Veterinary School of Sidi Thabet)
  • Delice
  • GIZ Powering Agriculture and Green Innovation Centres for the Agriculture and Food Sector (Tunisia and Kenya)


Supported by:

Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH on behalf ofGerman Ministry for Economic Cooperation and Development (BMZ)


Publications and Documents


Overview of Solar Milk Cooling Systems


References

  1. 1.0 1.1 2013-2016 Victor Torres Toledo, Ana Salvatierra Rojas, Alice Hack, Joachim Müller. University of Hohenheim. On going research at the Institute of Agriculture Engineering. Tropics and Subtropics Group.
  2. 2016 Victor Torres-Toledo, Klaus Meissner, Philip Täschner, Santiago Martınez-Ballester, Joachim MüllerfckLRDesign and performance of a small-scale solar ice-maker based on a DC-freezer and an adaptive control unit. fckLRSolar Energy Journal Publication.fckLRhttp://dx.doi.org/10.1016/j.solener.2016.10.022