General Kitchen Management Practices

From energypedia
Revision as of 16:52, 5 March 2013 by ***** (***** | *****)

--> Back to Overview GIZ HERA Cooking Energy Compendium

General Cooking and Energy-Saving Practices and Devices

This section deals with technologies and techniques that can save substantial amounts of energy and to reduce indoor air pollution.

Certain ways of fuel preparation and handling of the stove offer potential to improve efficiency and reduce the amount of resources used for cooking. One option is for users to adjust their behaviour and adopt efficient cooking practices. Another option is to integrate energy saving devices such as pressure cookers or heat retainers into the household cooking system. An optimal kitchen ventilation allows smoke to leave the kitchen before harming the cooks. These options are described in more details in the following three sections.


Fuel-saving Cooking Practices

Simple changes in the cooking practices of households can save substantial amounts of fuel. The following guidelines, commonly known as 'kitchen management practices' can be applied to save energy while cooking:


Don't waste fuel by running an empty stove

  • Get all the ingredients needed for the dish readily prepared (collecting, washing, cutting, etc.) before you start the fire.
  • Have all ingredients and utensils at hand close to the stove, including cooking tools, water, and spices.
  • Don't waste time once the fire is started and avoid wandering off (e.g. to chat with your neighbour) while the stove is already on.
  • Extinguish the fire when you have finished cooking.


Make the best use of the heat from the fire

  • Ensure that the heat generated from the fire finds its way into the pot.
  • Use a metal pot. It conducts heat better than a clay pot.
  • Use a pot with a flat bottom instead of round-shaped pots. The transfer of heat into a flat-bottom pot is higher.
  • Shield the pot from wind e.g. with a skirt around the pot, otherwise the hot flue gases will be blown away and the pot will be cooled by the wind.
  • Reduce the intensity of the fire once the food has come to a boil.
  • Use a heat retaining deviceafter boiling.
  • Always use a lid on the pot to prevent surplus steam from escaping the pot (steam is water heated beyond boiling point, so any steam leaving the pot is energy lost for the cooking process).
  • Use small amounts of water for cooking: any water that is thrown away after cooking has consumed a lot of energy until it boiled. This practice not only saves fuel but also retains nutrients.
  • Clean soot of your cooking pan.


Shorten cooking times of certain foods

  • Soak dried food (such as beans, peas, rice, etc.) prior to cooking.
  • Cut food up into smaller pieces: e.g. cut smaller cubes or slices instead of boiling a whole potato or cassava root.
  • Don't overcook food. Monitor the cooking process closely by testing regularly if the food is already cooked. Once the food is ready to eat, take it off the stove.


Often the impact of simple behavioural changes is overlooked, or is not known to the project staff or partner organisations. Since most of these practices do not require additional tools or devices, households can save energy at little or no cost.

In addition, efficient cooking practices do not only take place in the kitchen itself, but already start with fuel management. Therefore please read as well the chapter’s firewood management and other solid biomass fuels.


Further Information


Efficient cooking practices based on experience from Malawi in English and French


No cost techniques kitchen management practices

File:GTZ 3a FS kitchen management 2010.pdf



Techniques économiques pour l’utilisation du bois

based on experience from Burkina Faso in French

GIZ HERA l’utilisation du bois 2011.pdf
Mode d'utilisation des foyers améliorés. An instruction to "good practice" and "bad practice" of the stoves for Benin.
GIZ HERA 2012 Stove Use Instructuction.JPG
Save Our Trees-A guideline to to Saving Energy
Save our trees - A guide to saving energy - Afghanistan - GTZ.pdf


Energy-Saving Devices

Pressure Cookers

Pressure cookers are special cooking pots that can be sealed airtight and allow pressure to build up inside. A mechanical device (screws or interlocking parts) presses the pot-lid firmly against the pot-body. A gasket or seal in between the lid and the pot prevents steam to escape from the pot. With rising heat, the steam pressure inside the pot builds up beyond atmospheric pressure, allowing the temperatures to rise well above boiling point.

This design enables saves time, energy, and resources. The temperature inside a pressure cooker can well go beyond 110° C, which reduces the time needed to cook food. In addition, very little steam escapes between the pot and the lid, thus requiring less water to cook the food.

So far, pressure cookers have often been overlooked as potential components of efficient integrated cooking systems. They are normally made from thick aluminium or stainless steel, which makes them heavier and more expensive than conventional pots. They might also be difficult to produce in many developing countries. Prices are seldom below 20 US$, top-of-the range products easily exceed 200 US$. Because of their cost, they have not yet spread into many rural areas. However, pressure cookers are currently popular in urban areas, where the fuel has to be paid for in cash, and where the local foods can easily be cooked with pressure cookers: especially in Asia (China and India). To a much lesser extent pressure cookers are used in Latin America and South Africa.
If seals can be replaced, the life span of a pressure cooker usually by far exceeds the lifespan of a stove. Decision makers and project implementers may want to facilitate access to durable pressure cookers that can be used as alternative or complementing measure to a new stove technology and/or a new fuel.

Worldwide, different models of pressure cookers are offered on markets. In order to find the most appropriate model, different features have to be taken into consideration, such as price, size, main kind of stove applied (electric, gas, fire), durability, and maintenance. The following pictures show examples of pressure cookers found during a market analysis in Tajikistan in 2010/2011.


GIZ TJK Volkmer Pressure Cooker.jpg
GIZ TJK Volkmer Chinese pressure cooker.jpg
Afghan pressure cooker, without any plastic parts. (Picture: Heike Volkmer)
Chinese model (Picture: Heike Volkmer)
GIZ TJK Mueller Pressure cooker smallquality.png
GIZ TJK Mueller Old pressure cooker.jpg
Pressure cooker (Picture: Friederike Müller)
Old Soviet pressure cooker (Picture: Friederike Müller)


Pressure cookers can be used with nearly any stove and fuel type. When used on an open wood-fire, however, care should be taken that non-metal parts do not get exposed to the flames, otherwise they might melt or burn.

Pressure cooker can also be used in combination with a fireless cooker, such as a heat retention bag or box (discussed later). With this type of combination, fuel savings can exceed 90%, e g. with some types of legumes, which need 4-5 hours to cook. If the pot is put into a heat retention bag or box before the pressure valve releases steam, no energy in form of steam is lost. Information such as cooking time to boil, cooking time after boil is reached, and time required for the pot to remain in the heat bag are necessary for, e.g, instruction manuals. This information depends on the altitude, food to be cooked, and type of pressure cooker and heat retention bag.

Pressure cookers can also be utilized for cooking traditional cooking recipes. However, user training and awareness training are necessary to show users how to cook traditional recipes on the new equipment. One example of doing this is to handout a pressure cooker cookbook for traditional dishes.

In higher altitudes the low atmospheric pressure reduces the boiling point of water. Therefore the cooking is slower and requires more fuel or food remains undercooked. The required boiling time for softening the food is between one fourth and one fifth of the normal boiling time, depending on the altitude.

As the steam within the pressure cooker creates a higher boiling temperature, the potential of pressure cookers to save fuel and cooking time rises with increasing altitudes, as shown in the following table:


Altitude in meters Sea level 1000 m 1500 m 2250 m 3000 m Pressure cooker A
Boiling temp. degrees Celsius 100 ºC 96.6 ºC
95 ºC 92.2 ºC
90 ºC
118 ºC ~ 120 ºC

(HEDON, issue 57 – 2009, Sjoerd Nienhuys)


The list below shows the advantages and disadvantages of pressure cookers:
Advantages of pressure cookers

  • Pressure cookers can be used with most fuel types and stoves.
  • At high altitudes where the boiling point is lower, they offer great advantages to raise the temperature above 100°C and prevent food from being left undercooked.
  • Cooking is much faster and thus the pressure cooker can save considerable amounts of time and energy.
  • It is possible to sterilise goods using a pressure cooker.


Disadvantages of pressure cookers

  • More expensive than normal pots.
  • As steam builds up inside, they cannot be used for frying or roasting.
  • Can not be used for foods that need to be stirred during cooking (like maize porridge).
  • Opening the cooker must be done carefully since hot steam, under pressure, can escape with force and scald the cook.
  • Pressure cookers are not appropriate for dishes, where different ingredients need to be added at different times, as they cannot easily be opened during cooking.
  • Seal between the pot and the lid wears out and must be replaced; thus a service system has to be in place.
  • Cooking with a pressure cooker requires the change of accustomed cooking processes (behaviour change).
  • Due to the hotter steam the risk of scalding is higher.


Safety aspects
If appropriately used and maintained, pressure cookers are safe to use. However, several important considerations should be kept in mind. To prevent explosions, regulators and safety valves let surplus pressure escape. It is really important that the safety valve and regulator are fully functional. Pressure cookers should never be filled until the top of the pot, as the regulator and the valve can get blocked easily. In case of too high pressure the steam can abruptly escape, which can lead to scalding. In addition, pressure cookers made from aluminium should not be cleaned with sharp items or with soda, as afterwards aluminium can enter the food, which will cause diseases.

Unfortunately, if the pressure cooker is poorly maintained or inappropriate used, the cooker can explode, which can result in serious injuries.


Further Information

Experience based on a pressure cooker training in Tajikistan by Sjoerd Nienhuys in English
http://www.hedon.info/BP57_PressureCookerTraining?bl=y
Everything about pressure cookers: Pressure-Cooking Times & Instructions
http://fastcooking.ca/pressure_cookers/cooking_times_pressure_cooker.php
Manual on Pressure Cookers (Russian)

Manual_PRESSURECOOKER_rus_fmu+fa.pdf[[:file:|file:]]


Heat Retainers: Keep cool, stay hot

Retaining heat is a good way to delink the time of food preparation and the time of food consumption. This is especially helpful to complement a fuel that is not available on demand like solar energy. It allows having hot food even after sunset, when sunlight is not available to cook.
Heat retainers cannot substitute a stove, but they can be used to complement any stove and any fuel. In order to retain heat for cooking, heat needs to be generated first. By combining the heat retaining devices with other energy-efficient technologies (pressure cookers, solar stoves, improved cook stoves (ICS)) or practices, it can contribute to reducing the fuel consumption considerably.


Thermos Flasks

Thermos flasks are an inexpensive way to maintain the heat of water, beverages or liquid foods like soup and porridge over time. In places, where food preparation is based on pouring hot water over food items such as in Tibet, thermos flasks save fuel and enhance cooking comfort. Alongside solar cookers, families own up to five thermos flasks and store the water heated by the solar cooker during the day. The hot water is used for preparing both morning and evening meals (mainly soup and porridge) enabling the solar cooker to satisfy almost all household energy needs. However, this represents a rather specific case, which may not be transferable to many other countries. Yet, thermos flasks are currently underutilized and could probably play a more important role.
When promoting the use of thermos flasks, features concerning price, durability, cleaning, size and material (toxic) have to be also considered.


Heat Retention Boxes or Bags

The fuel consumption during the process of food preparation on a fire is not constant. A lot of fuel is required to heat up the content of a cooking pot to boil. However, once it is boiling, it only takes little energy to keep it hot and maintain the temperature at boiling point. Some foods like legumes, (sweet) potatoes, meat, cassava or rice etc, do not require any stirring. The content of the pot has to be heated once to the boiling point and then kept at simmering level on a little flame without having to open the lid of the pot.
Instead of keeping the pot for a long time on a small fire, you can also wrap the cooking pot in an insulative cover which retains the heat in the pot. The food is cooking further as long as the temperature does not drop below 70°C. The simmering process of the food continues inside the wrapping. No further external heat supply or 'fire' is required. This is why this is called 'fireless cooking'. Based on the experience of the cook with cooking times of the specific foods, the food stays in the heat retainer until it is served.

Food can be kept warm for up to 6 hours, e.g. for people who return home late from the field or the market and want their children to find hot food when they come back home from school. Construction and functionality of the heat-retaining box (fireless cooker, hay box, hot bag etc.) depend on the insulative properties of the material used. The underlying principle of insulation is that air does not conduct heat. The more insulated pockets of air you can create between the cooking pot and the outside, the more heat will be retained inside the pot. Insulative materials are almost everywhere available. For example organic residues such as hay, sawdust, cotton waste, or dried leaves, e.g. from banana plants can be used. Other materials are waste paper, polystyrene beads, or vermiculite. An insulated lid or cushion closes the box or bag.
Depending on the type of food cooked and traditional cooking practices, using heat retention bags can reduce fuelwood consumption to a great extent. Some people report that they can save up to 80% of their fuel, depending on the food and the efficiency of the insulation. An added benefit is that slow cooking retains many more of the food’s nutrients and vitamins than if prepared on a constantly hot fire.


GIZ Roth Malawi Foodwarmer.png
Photo: C. Roth/GIZ


Below are listed some of the advantages and disadvantages of heat-retention bags and boxes:

Advantages

  • Food can be kept warm for more than 24 hours.
  • Fuel savings.
  • Food cannot burn.
  • Women spend less time cooking and are less exposed to smoke.
  • Food can be left unattended in the hot bag, leaving women more time for other activities.
  • Women can reduce the frequency of cooking by preparing enough food for two meals and putting half of it in the hay box to keep warm.
  • Depending on the material used, heat retainers can be as well used for cooling.
  • Heat retention bags and boxes can be made with almost no costs or purchased for little money.


Disadvantages

  • The technology is not applicable to all types of food; it is limited to dishes that are cooked slowly in liquid (beans, rice, meat etc.).
  • If you open the lid of the pot and stir the content, the temperature goes down quickly and might go below the point where the food still cooks.
  • Change of taste: if beans are prepared in a fireless cooker, they don't acquire the smoky taste as if they were cooked on a fire for long hours. They might be healthier, but they taste different and are sometimes rejected for that reason.
  • It is not advisable to keep the food warm longer than six hours. Otherwise it might promote the growth of microorganisms in the food which puts the health at risk.
  • In case the pot is used on open fire, people might refuse to put the black pot into the box or bag, in order not to soil it
  • Cooking with a heat retention bag or box requires changing accustomed cooking processes. In order to show people the advantages of the heat retention box or bag cooking demonstrations, cooking books, etc. might be required.


If deciding between a heat retention box or a bag, the following points could be helpful:

Heat retention box
Heat retention bag
Easier to keep clean Material easily available and cheap, but difficult to wash or clean
Not adaptable to different pot sizes Adoptable to different pot sizes
Higher transport costs
Less space required for transportation, lower transportation costs
Higher production costs (material, labor)
Lower production costs (material, labour)
Source for income generation Source for income generation
Cooled items can be stored cool in the box. When reflective foil is used, the reversed bag can be used for cooling
Usable as seat, in case box is robust Few space required for packing away


GIZ TJK Volkmer first heat retention box 2011.jpg

GIZ TJK Mueller heat retention bag 2011.jpg

First model of a heat retention box made from cardboard box, polystyrene, and reflective insulative foil in Tajikistan
Picture: Heike Volkmer
Heat retention bag with trivet promoted in Tajikistan
Picture: Friederike Müller


Heat retention boxes/bags have been successfully introduced for taking care of sick people. Patients often cannot eat one big meal but have to eat or drink small portions of food or tea many times throughout the day and night. Without a fireless cooker, this would require frequent food preparation. In a retained heat cooker, food can be kept warm near the bed of a sick person who can take hot food or tea at a time of his convenience for a period of 3-4 hours. This has particular relevance for taking care of HIV/AIDS patients.

Christa Roth: GIZ Probec (2006) Presentation


Further Information

References
Links

Roth, Christa: Retained heat cooker: "Fireless cooker" or "Foodwarmer"
An illustrated step-by-step description from Malawi showing how to build a food warmer/fireless cooker using a basket, cloth and dried banana leaves. Two recipes for local dishes are included. It is a very helpful document.

RTENOTITLE

Construction manual of a heat retention bag – experience from Tajikistan and Pakistan (English).
Habitat Improvement in de Hindu Kush (HIHK)
Technical Working Paper ~ Number 20a, How to Make a Thin Heat Retention Bag (Size 45 cm)



HIHK-EU 2011 en manual how to make a heat retention bag tjk pak.pdf
Experience from Kenya introducing the fireless cookers to women.
Vincent Okello, 2009: Engaging communities in alleviating smoke –what the real experts tell you
http://www.hedon.info/BP57:EngagingCommunitiesInAlleviatingSmokeOLD
Retained Heat Cooker Guide written by Don O'Neal Guide English.pdf http://www.pciaonline.org/files/RHC Guide English.pdf
The website provides information on integrated cooking methods. http://solarcooking.wikia.com/wiki/Integrated_Cooking_Method
The website leads directly to information on heat retention cooking. http://solarcooking.wikia.com/wiki/Heat-retention_cooking
Information on making a hay box and cooking practices with cooking times, etc. http://solarcooking.org/heat-retention/
References to examples on retained heat cooking from Bolivia. http://www.bioenergylists.org/en/node/245
References to examples on retained heat cooking from Kenya http://cookinginabasket.blogspot.com/
Information on “wonder baskets” introduced in Tanzania. http://www.sunseedtanzania.org/home.php
The Hotbag Project. Information about cooking methods and times, recipes, and products to buy. http://www.hotbag.co.za/pages/home/
Hot bag – Cooking with retained heat and recipes from South Africahttp://www.afreca.org
Wendy Chandler en user manual hot bag 2011.pdf

Marketing material for promoting heat retention bags in Tajikistan through a retailer cooperative (Russian). RTENOTITLE
Cooking book for using the heat retention bag for traditional dishes in Tajikistan (Russian). RTENOTITLE
Heat retention product explanation with guidance on cooking times for special dishes from Tajikistan (Russian) RTENOTITLE
Commercial website selling heat retention bags. www.afreca.org/displayproducts.php?zTypeId=ptype121274948383844600
An example from South Africa shows that with a clever usage metering device, retained heat cookers can qualify to generate carbon credits. http://www.naturalbalancesa.com/
Mike Bridgewater: Heat Retention Cooking vs. Solar Cooking
The Solar Cooking Archiv

www.solarcooking.org


Pan Africa Conservation Education: a fireless cooker.pdf Make a fireless cooker This step-by step instruction for building a fireless cooker is supplemented with background information on the cooker and its use. It can be downloaded under www.paceproject.net. This homepage provides a number of other helpful documents on resource protection at grassroots level.



Kitchen Ventilation to Reduce Air Pollution Levels from Cookstove Smoke

This section deals with technologies and techniques that reduce the air pollution and smoke level within a kitchen.

Smoke exposure is influenced by various factors: by the fuel used, by the user behavior, by the type of cookstove, and by the ventilation. With a 3-stone fire and no or bad ventilations, walls are often black from the floor to the roof, indicating that the kitchen used to be filled entirely with smoke.
Not even chimneys are necessarily the solution for smoke removal: the smoke leaves not out of chimney, but out of door and windows. Most chimney- stoves only function well with the pot the stove was designed for, not with a kettle without lip.
If climate allows openings in the wall, simple ventilation slots can guide smoke out. Unlike chimneys, they do not need maintenance.


Improving kitchen ventilation Folie08.jpg

Improving Ventilation of existing kitchens (picture by C. Roth, GIZ)


Improving Ventilation of existing kitchens:

  • New ventilation slots at highest points of room
  • Cross-ventilation: new slots in walls at the height of peoples noses when cooking - cook must see


‘Clean’ cooking is not a result from the stove, but from how you use it!


For more pictures and information, see presentation below:

References

Links

Kitchen Ventilation to reduce air pollution levels from cookstove smoke: Examples from Malawi. Presentation of Christa Roth, held at PCIA Discover Stove Camp, 22nd of March 2012 in Malawi (English)

En-GIZ 2012 Roth kitchen ventilation-.pdf

Ventilation des cuisines pour réduir la pollution des combustibles solides: Examples de Malawi presentés par Christa Roth a PCIA Discover Stove Camp, 22 March 2012 in Malawi (French)

FR-GIZ 2012 Roth ventilation cuisine-.pdf


References

This article was originally published by GIZ HERA. It is basically based on experiences, lessons learned and information gathered by GIZ cook stove projects. You can find more information about the authors and experts of the original “Cooking Energy Compendium” in the Imprint.



Top of the page

HERA Cooking Energy Compendium --> Back to Overview GIZ HERA Cooking Energy Compendium