Difference between revisions of "Grain Mill"

From energypedia
***** (***** | *****)
***** (***** | *****)
 
(20 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Introduction  =
+
= Overview =
  
To prepare the cereals for further processing, the chaff has to be separated from grain, either manually with a winnowing tray or mechanically by a powered shaker or grinder. Mechanical power is also available for dehusking rice or shelling maize as an alternative to manual work with rice hullers or huskers and maize shellers. The same applies to other cereals and crops for which special machinery has been or is being developed. Bran as a by-product of dehulling cereals is a source of income if sold as poultry feed and other animal feed.<br>Milling transforms grain into flour for food preparation. The main crops that are milled are maize, rice, sorghum, teff and millet, using hammer or plate mills. A hammer mill crushes aggregate material into smaller pieces with hammers (beaters) made from hardened alloy steel which are rectangular for efficient grinding. Hammer mills are also used to pulverise by-products of coconuts (copra), palm kernels &amp; other oil seeds (press cake). Wheat is milled with roller mills but these are too expensive for small-scale operations. Although demand may be highest during the harvest season, grain milling is required throughout the year as many households keep a stock of grain<br>Most operations utilise energy derived from mechanical power, with many alternatives for technologies powered by human, animal, water or a stationary engine. Mechanised milling operations are far more efficient and far less labour intensive than manual methods, using wind/micro-hydro and hybrid power systems (wind/hydro/diesel) for energy intensive processing activities. Mills can be powered directly by transforming energy from sources such as wind or water or by electricity generated from a combination of fossil fuel-fired generators with wind or hydro power. Without electricity, grain mills are often driven by diesel motors, for example, in the so-called multi-functional platforms.
+
To prepare the cereals for further processing, the chaff has to be separated from grain, either manually with a winnowing tray or mechanically by a powered shaker or grinder. Mechanical power is also available for dehusking rice or shelling maize as an alternative to manual work with rice hullers or huskers and maize shellers. The same applies to other cereals and crops for which special machinery has been or is being developed. Bran as a by-product of dehulling cereals is a source of income if sold as poultry feed and other animal feed. Milling transforms grain into flour for food preparation. The main crops that are milled are maize, rice, sorghum, teff and millet, using hammer or plate mills. Although demand may be highest during the harvest season, grain milling is required throughout the year as many households keep a stock of grain.
  
= Technologies  =
+
Mills can be powered directly by transforming energy from sources such as wind or water or by electricity generated from a combination of fossil fuel-fired generators with wind or hydro power. Without electricity, grain mills are often driven by diesel motors, for example, in the so-called multi-functional platforms.
  
There are several technologies available, and they can be grouped into technologies
+
= Technologies =
  
*concerning the way the product is milled  
+
<u>There are several technologies available, and they can be grouped into technologies:</u>
 +
 
 +
*concerning the way the product is milled
 
*concerning the way the motor is driven
 
*concerning the way the motor is driven
  
== Mill technologies  ==
+
== Mill Technologies based on the product milled ==
 +
'''Hammer mills:'''  A hammer mill crushes aggregate material into smaller pieces with hammers (beaters) made from hardened alloy steel which are rectangular for efficient grinding. Hammer mills are also used to pulverise by-products of coconuts (copra), palm kernels & other oil seeds (press cake). They are suitable for a wide variety of grains and produce flour with find texture. <ref>Efficiency for Access Coalition, “Solar Milling: Exploring Market Requirement to Close the Commercial Viability Gap.”</ref>
 +
 
 +
Wheat is milled with roller mills but these are too expensive for small-scale operations.
 +
 
 +
'''Plate mills''': In a plate mill, the grain is passed between plates which rotate to ground the flour and the fineness of the flour can be controlled in this type of mills. Normally, these mills produce coarser flour as compared to hammer mills. <ref>International Labour Organization and World Employment Programme, “Plate, Hammer and Stone Mills.”</ref>
  
Hammer mills etc.  
+
'''Stone mills''': Two milestones are aligned one top of another, such that there is a hole in the center to add the grain. The milestone are then rotated to ground the flour and the flour travels to the periphery of the stones. <ref>International Labour Organization and World Employment Programme, “Plate, Hammer and Stone Mills.”</ref>
  
== Drive technologies  ==
+
== Drive Technologies ==
 +
The motor can be driven by a range of power sources such as diesel, grid electricity, solar, hydro or can also be retrofitted (replacing diesel engine with electric motor). The image below provides the different types of mills available in East Africa.<ref>Efficiency for Access Coalition, “Solar Milling: Exploring Market Requirement to Close the Commercial Viability Gap,” 2020, <nowiki>https://storage.googleapis.com/e4a-website-assets/SolarMilling_Market-Requirements.pdf</nowiki>.</ref>
  
=== DC grain mills  ===
+
[[File:Milling.png]]
  
These are the so-called «&nbsp;solar&nbsp;» grain mills. For the sake of this article, a solar grain mill is a grain mill that is driven by direct current. The grain mill is used in a solar system that consists of the basic components (PV panels, batteries, charge controller, load). Common voltage levels are 12 V and 24 V.
+
=== DC Grain Mills ===
  
[[Image:Dc_grain_mill_with_mill_operator.JPG|thumb|DC grain mill with mill operator. This specific device is used for millet.]]
+
These are the so-called «&nbsp;solar&nbsp;» grain mills. For the sake of this article, a solar grain mill is a grain mill that is driven by direct current. The grain mill is used in a solar system that consists of the basic components (PV panels, batteries, charge controller, load). Common voltage levels are 12 V and 24 V.
  
Advantages:  
+
[[File:Dc grain mill with mill operator.JPG|thumb|right|180px|DC grain mill with mill operator. This specific device is used for millet.]]<u>Advantages:</u>
  
*General advantages of decentralised solar systems: usable wherever the resource is available, can be sized to the need, etc.
+
*General advantages of decentralised [[Solar Home Systems (SHS)|solar systems]]: usable wherever the resource is available, can be sized to the need, etc.
  
Disadvantages:  
+
<u>Disadvantages:</u>
  
*Relatively high start-up currents require a start-up resistor which may brake easily.  
+
*Relatively high start-up currents require a start-up resistor which may brake easily.
 
*The start-up current also means that the load (the mill) cannot be directly connected to the charge controller, but must be connected to the battery. The battery is thus not protected against deep discharge. Users must be trained to switch off the mill as soon as the charge controller indicates a deep discharge.
 
*The start-up current also means that the load (the mill) cannot be directly connected to the charge controller, but must be connected to the battery. The battery is thus not protected against deep discharge. Users must be trained to switch off the mill as soon as the charge controller indicates a deep discharge.
 +
*low milling output as compared to diesel or electric mill.
  
Technically, one could solve this problem by including a shunt that is governed by the load contact of the charge controller and that disconnects the mill as soon as the charge controller switches off the load. However, DC shunts are very expensive.  
+
Technically, one could solve this problem by including a shunt that is governed by the load contact of the charge controller and that disconnects the mill as soon as the charge controller switches off the load. However, DC shunts are very expensive.
  
 
*Requires battery maintenance.
 
*Requires battery maintenance.
  
=== AC grain mills  ===
+
{{#widget:YouTube|id=xWgevfqIvdU|height=400|width=800}}
 +
 
 +
 
 +
 
 +
Some companies offering solar mills are: [https://agsol.com/ Agsol], [https://www.zerohomebills.com/product/phaesun-boss-kit-pro-mill/ Phasesun] and [https://solarmilling.com/new-zebra-mill/ Zebra mill].
 +
=== AC Grain Mills ===
 +
 
 +
These are grain mills which are operated at 230 V. Basic models can be found with suppliers of agricultural equipment. These grain mills can be operated on the national grid or on minigrids.
  
These are grain mills which are operated at 230 V. Basic models can be found with suppliers of agricultural equipment. These grain mills can be operated on the national grid or on minigrids.  
+
In addition, these grain mills can also be driven with solar energy. In case of solar, it would require an inverter and batteries.
  
In addition, these grain mills can also be driven with solar energy. This use case would require an inverter and batteries.
+
=== Diesel-driven Grain Mills ===
  
=== Diesel-driven grain mills  ===
+
These can, for example, be found in multi-functional platforms. In this case, the diesel motor drives the grain mill via a transmission drive.
  
These can, for example, be found in multi-functional platforms. In this case, the diesel motor drives the grain mill via a transmission drive.  
+
=== Retrofitted mills ===
 +
These are old diesel mills that have been retrofitted with an electrical motor and often cheaper than a complete electrical mills. They are usually not very common.<ref>Booth et al., “Productive Use of Energy in African Micro-Grids.”</ref>
  
= Practical Experiences  =
+
=== Hydro Mills (Direct drive Grain Mill) ===
  
== Senegal  ==
+
Grain mills can also be power by the pure rotational power of a water turbine. These mills are very popular in South-Asia.
  
PERACOD currently has two DC-driven grain mills in operation. These grain mills were bought locally. After initially receiving quotes for a product that seemed suitable, another product had to be bought since the provider could not deliver the product the project had originally aimed at.
+
= Practical Experiences =
  
After installation, problems occurred with the starting resistor, which broke and had to be replaced several times. Also, users manipulated the system, leading to several failures. The grain mills have had a disappointed performance ever since installation. A detailed technical monitoring is under way in order to study the problem further.
+
== Senegal ==
  
One of the first conclusion of the project was to not underestimate the amount of work necessary in the beginning to make the productive use work.  
+
PERACOD currently has two DC-driven grain mills in operation. These grain mills were bought locally. After initially receiving quotes for a product that seemed suitable, another product had to be bought since the provider could not deliver the product the project had originally aimed at.
  
Please see a presentation [http://energypedia.info/index.php/File:GIZ_Im_Abseits_der_Netze_012011_Senegal_Peracod_PU_Wegener.pdf here] on some issues with solar grain mills in Senegal.
+
After installation, problems occurred with the starting resistor, which broke and had to be replaced several times. Also, users manipulated the system, leading to several failures. The grain mills have had a disappointed performance ever since installation. A detailed technical monitoring is under way in order to study the problem further.
  
= Pitfalls  =
+
One of the first conclusion of the project was to not underestimate the amount of work necessary in the beginning to make the productive use work.
  
== Product alteration  ==
+
► Please see a presentation [[:File:GIZ Im Abseits der Netze 012011 Senegal Peracod PU Wegener.pdf|here]] on some issues with solar grain mills in Senegal.
  
Grain mills may alter characteristics of the good that is milled.
+
► [[Senegal Energy Situation|Senegal Energy Situation]]
  
The size of the resulting powder may be different from the size people are used to from other milling techniques. This can result in changes in the way the product can be used for food preparation and / or changes in taste.
+
= Pitfalls =
  
In addition, grain may become hot in the grain mill and thus change its taste.  
+
== Product Alteration<br/> ==
 +
[[File:Millet before and after milling.JPG|thumb|right|124px|Millet before and after milling]]
 +
*Grain mills may alter characteristics of the good that is milled.
 +
*The size of the resulting powder may be different from the size people are used to from other milling techniques. This can result in changes in the way the product can be used for food preparation and / or changes in taste.
 +
*In addition, grain may become hot in the grain mill and thus change its taste.
  
== Types of grain that can be milled  ==
+
== Types of Grain that can be Milled ==
 +
Grain mills must be adapted to the type of product to be milled. There are several grain mills which can be adapted to different goods, for example, wheat, maize, or sorghum. Be careful when choosing a product and test it before deployment.
  
Grain mills must be adapted to the type of product to be milled. There are several grain mills which can be adapted to different goods, for example, wheat, maize, or sorghum. Be careful when choosing a product and test it before deployment.
+
== System sizing and financing ==
  
== Improper sizing ==
+
When designing the system, one should take care of proper sizing of the mill and the associated power system.
  
When designing the system, one should take care of proper sizing of the mill and the associated power system. Key questions to be considered include:
+
<u>Key questions to be considered include:</u>
  
*What is the amount of grain that has to be milled on average, and in peak times? Can my (diesel / solar) system power the mill for a sufficient amount of time?
+
*What is the amount of grain that has to be milled on average, and in peak times? Can my (diesel / solar) system power the mill for a sufficient amount of time? Is there any seasonal variations?
*What is the output of the mill (in kg/day)? Does the output vary in function of the type of grain?
+
*What is the output of the mill (in kg/day)? Does the output vary in function of the type of grain?  
*What is the "catchment area" of the mill, i.e., from how far will people come to mill their products?
+
*What is the "catchment area" of the mill, i.e., from how far will people come to mill their products?
 +
*What is the texture of the flour needed (i.e, do they need course or finely grained)? Can my mill technology produce this result?
 +
*For off-grid solar mills, what is the irradiation profile of the area? Is there a need to add batteries to meet the demand?
  
 
Answering these questions will require technical / engineering knowledge (system design etc.), but also knowledge of people's habits.
 
Answering these questions will require technical / engineering knowledge (system design etc.), but also knowledge of people's habits.
  
= Impact  =
+
For financing of the system, following key questions need to be considered:
 +
 
 +
* What is the capital cost of the mill? Is there any subsidy/grant/loan scheme in place ?
 +
* What is the operating cost of the mill? Is the income from the mill enough to pay the capital and operating cost?
 +
* What is the business model for the miller, eg. milling as a service, selling flour etc?
 +
* Who are the target customers and is there a competing mill in the nearby area?
 +
 
 +
= Impact =
 +
 
 +
Grain milling can greatly ease workload on women, as women are usually in charge of milling by hand with the help of a mortar and pestle. Having a grain mill in the village also reduces the travel travel for both men and women compared to a scenario where they previously had to travel to nearby villages.  
 +
 
 +
= Further Information =
 +
 
 +
*[[Portal:Water and Energy for Food|Water and Energy for Food (WE4F) portal on energypedia]]
 +
*[[Publication_-_Solar_Milling:_Exploring_Market_Requirements_to_Close_the_Commercial_Viability_Gap|Publication - Solar Milling: Exploring Market Requirements to Close the Commercial Viability Gap]]
 +
*[[Milling as a Productive Application in Green Mini-Grid (GMG) Systems]]
 +
*[[Implementing a Productive Use Grant Scheme in Uganda]]<br />
 +
= References<br/> =
  
Grain milling can greatly ease workload on women, as women are usually in charge of milling by hand with the help of a mortar and pestle.
+
<references />
  
[[Category:Productive_Use]][[Category:Agriculture]]
+
[[Category:Impacts]]
 +
[[Category:Agriculture]]
 +
[[Category:Senegal]]
 +
[[Category:Powering_Agriculture]]
 +
[[Category:Productive_Use]]
 +
[[Category:Lessons_Learned]]

Latest revision as of 14:27, 14 June 2022

Overview

To prepare the cereals for further processing, the chaff has to be separated from grain, either manually with a winnowing tray or mechanically by a powered shaker or grinder. Mechanical power is also available for dehusking rice or shelling maize as an alternative to manual work with rice hullers or huskers and maize shellers. The same applies to other cereals and crops for which special machinery has been or is being developed. Bran as a by-product of dehulling cereals is a source of income if sold as poultry feed and other animal feed. Milling transforms grain into flour for food preparation. The main crops that are milled are maize, rice, sorghum, teff and millet, using hammer or plate mills. Although demand may be highest during the harvest season, grain milling is required throughout the year as many households keep a stock of grain.

Mills can be powered directly by transforming energy from sources such as wind or water or by electricity generated from a combination of fossil fuel-fired generators with wind or hydro power. Without electricity, grain mills are often driven by diesel motors, for example, in the so-called multi-functional platforms.

Technologies

There are several technologies available, and they can be grouped into technologies:

  • concerning the way the product is milled
  • concerning the way the motor is driven

Mill Technologies based on the product milled

Hammer mills: A hammer mill crushes aggregate material into smaller pieces with hammers (beaters) made from hardened alloy steel which are rectangular for efficient grinding. Hammer mills are also used to pulverise by-products of coconuts (copra), palm kernels & other oil seeds (press cake). They are suitable for a wide variety of grains and produce flour with find texture. [1]

Wheat is milled with roller mills but these are too expensive for small-scale operations.

Plate mills: In a plate mill, the grain is passed between plates which rotate to ground the flour and the fineness of the flour can be controlled in this type of mills. Normally, these mills produce coarser flour as compared to hammer mills. [2]

Stone mills: Two milestones are aligned one top of another, such that there is a hole in the center to add the grain. The milestone are then rotated to ground the flour and the flour travels to the periphery of the stones. [3]

Drive Technologies

The motor can be driven by a range of power sources such as diesel, grid electricity, solar, hydro or can also be retrofitted (replacing diesel engine with electric motor). The image below provides the different types of mills available in East Africa.[4]

Milling.png

DC Grain Mills

These are the so-called « solar » grain mills. For the sake of this article, a solar grain mill is a grain mill that is driven by direct current. The grain mill is used in a solar system that consists of the basic components (PV panels, batteries, charge controller, load). Common voltage levels are 12 V and 24 V.

DC grain mill with mill operator. This specific device is used for millet.

Advantages:

  • General advantages of decentralised solar systems: usable wherever the resource is available, can be sized to the need, etc.

Disadvantages:

  • Relatively high start-up currents require a start-up resistor which may brake easily.
  • The start-up current also means that the load (the mill) cannot be directly connected to the charge controller, but must be connected to the battery. The battery is thus not protected against deep discharge. Users must be trained to switch off the mill as soon as the charge controller indicates a deep discharge.
  • low milling output as compared to diesel or electric mill.

Technically, one could solve this problem by including a shunt that is governed by the load contact of the charge controller and that disconnects the mill as soon as the charge controller switches off the load. However, DC shunts are very expensive.

  • Requires battery maintenance.


Some companies offering solar mills are: Agsol, Phasesun and Zebra mill.

AC Grain Mills

These are grain mills which are operated at 230 V. Basic models can be found with suppliers of agricultural equipment. These grain mills can be operated on the national grid or on minigrids.

In addition, these grain mills can also be driven with solar energy. In case of solar, it would require an inverter and batteries.

Diesel-driven Grain Mills

These can, for example, be found in multi-functional platforms. In this case, the diesel motor drives the grain mill via a transmission drive.

Retrofitted mills

These are old diesel mills that have been retrofitted with an electrical motor and often cheaper than a complete electrical mills. They are usually not very common.[5]

Hydro Mills (Direct drive Grain Mill)

Grain mills can also be power by the pure rotational power of a water turbine. These mills are very popular in South-Asia.

Practical Experiences

Senegal

PERACOD currently has two DC-driven grain mills in operation. These grain mills were bought locally. After initially receiving quotes for a product that seemed suitable, another product had to be bought since the provider could not deliver the product the project had originally aimed at.

After installation, problems occurred with the starting resistor, which broke and had to be replaced several times. Also, users manipulated the system, leading to several failures. The grain mills have had a disappointed performance ever since installation. A detailed technical monitoring is under way in order to study the problem further.

One of the first conclusion of the project was to not underestimate the amount of work necessary in the beginning to make the productive use work.

► Please see a presentation here on some issues with solar grain mills in Senegal.

Senegal Energy Situation

Pitfalls

Product Alteration

Millet before and after milling
  • Grain mills may alter characteristics of the good that is milled.
  • The size of the resulting powder may be different from the size people are used to from other milling techniques. This can result in changes in the way the product can be used for food preparation and / or changes in taste.
  • In addition, grain may become hot in the grain mill and thus change its taste.

Types of Grain that can be Milled

Grain mills must be adapted to the type of product to be milled. There are several grain mills which can be adapted to different goods, for example, wheat, maize, or sorghum. Be careful when choosing a product and test it before deployment.

System sizing and financing

When designing the system, one should take care of proper sizing of the mill and the associated power system.

Key questions to be considered include:

  • What is the amount of grain that has to be milled on average, and in peak times? Can my (diesel / solar) system power the mill for a sufficient amount of time? Is there any seasonal variations?
  • What is the output of the mill (in kg/day)? Does the output vary in function of the type of grain?
  • What is the "catchment area" of the mill, i.e., from how far will people come to mill their products?
  • What is the texture of the flour needed (i.e, do they need course or finely grained)? Can my mill technology produce this result?
  • For off-grid solar mills, what is the irradiation profile of the area? Is there a need to add batteries to meet the demand?

Answering these questions will require technical / engineering knowledge (system design etc.), but also knowledge of people's habits.

For financing of the system, following key questions need to be considered:

  • What is the capital cost of the mill? Is there any subsidy/grant/loan scheme in place ?
  • What is the operating cost of the mill? Is the income from the mill enough to pay the capital and operating cost?
  • What is the business model for the miller, eg. milling as a service, selling flour etc?
  • Who are the target customers and is there a competing mill in the nearby area?

Impact

Grain milling can greatly ease workload on women, as women are usually in charge of milling by hand with the help of a mortar and pestle. Having a grain mill in the village also reduces the travel travel for both men and women compared to a scenario where they previously had to travel to nearby villages.

Further Information

References

  1. Efficiency for Access Coalition, “Solar Milling: Exploring Market Requirement to Close the Commercial Viability Gap.”
  2. International Labour Organization and World Employment Programme, “Plate, Hammer and Stone Mills.”
  3. International Labour Organization and World Employment Programme, “Plate, Hammer and Stone Mills.”
  4. Efficiency for Access Coalition, “Solar Milling: Exploring Market Requirement to Close the Commercial Viability Gap,” 2020, https://storage.googleapis.com/e4a-website-assets/SolarMilling_Market-Requirements.pdf.
  5. Booth et al., “Productive Use of Energy in African Micro-Grids.”