Difference between revisions of "SPIS Toolbox - Set Up - Further Readings"
From energypedia
***** (***** | *****) m |
***** (***** | *****) m |
||
| Line 1: | Line 1: | ||
| − | |||
| − | + | {{SPIS Banner}} | |
| − | + | === '''<span style="color:#879637;">Further Reading, Links and Tools</span>''' === | |
| − | + | ===== '''Links''' ===== | |
| − | + | *“IRRIG8QUICK Irrigation Calibration Quick Test - Guidelines for Drip Micro Irrigation” by Page Blomer Associates (2009) at: [http://www.claw.net.nz/resources/irrigation/ www.claw.net.nz/resources/irrigation] (08/13/2015) | |
| − | Schultz and Suryani, 2015. EnDev2 Indonesia: Inspection Guide for Photovoltaic Village Power (PVVP) Systems. GIZ | + | *“Solar-Powered Irrigation Systems – Stocktaking and Analysis Report” by German Technical Cooperation Agency (GIZ) (2015) |
| + | *Schultz and Suryani, 2015. EnDev2 Indonesia: Inspection Guide for Photovoltaic Village Power (PVVP) Systems. GIZ | ||
| | ||
| − | '''SPIS tools''' | + | ===== '''SPIS tools''' ===== |
| − | '''SET UP 01''' – PV Acceptance Test: Guideline to compare the installed with the actual capacity of the pump | + | *'''SET UP 01''' – PV Acceptance Test: Guideline to compare the installed with the actual capacity of the pump |
| − | + | *'''SET UP 02''' – Workmanship Quality Checklist: Checklist for inspecting and verifying the workmanship quality | |
| − | '''SET UP 02''' – Workmanship Quality Checklist: Checklist for inspecting and verifying the workmanship quality | ||
| | ||
| Line 23: | Line 22: | ||
The following tools that are assigned to other Modules are also relevant: | The following tools that are assigned to other Modules are also relevant: | ||
| − | '''PROMOTE 01'''- SPIS Rapid Assessment: on the analysis of the market for service provision | + | *'''PROMOTE 01'''- SPIS Rapid Assessment: on the analysis of the market for service provision |
| − | + | *'''DESIGN 03'''- Pump Sizing Tool: to verify SPIS acceptance testing | |
| − | '''DESIGN 03'''- Pump Sizing Tool: to verify SPIS acceptance testing | + | *'''MAINTAIN 03-''' Water application uniformity test: that should be implemented directly after setting up the system |
| − | + | *{{SPIS Reference}} | |
| − | '''MAINTAIN 03-''' Water application uniformity test: that should be implemented directly after setting up the system | ||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 14:01, 7 June 2017
Introduction
The Toolbox on Solar Powered Irrigation Systems (SPIS) is designed to enable advisors, service providers and practitioners in the field of solar irrigation to provide broad hands-on guidance to end-users, policy-makers and financiers. Risks related to system efficiency, financial viability and the unsustainable use of water resources can thus be minimized. The Toolbox comprises informative modules supplemented with user-friendly software tools (calculations sheets, checklists, guidelines). read more
Modules and tools touch upon:
- assessing the water requirements,
- comparing the financial viability,
- determining farm profitability and payback of investment in SPIS,
- sustainably design and maintain a SPIS,
- highlight critical workmanship quality aspects,
- and many more.
Further Reading, Links and Tools
Links
- “IRRIG8QUICK Irrigation Calibration Quick Test - Guidelines for Drip Micro Irrigation” by Page Blomer Associates (2009) at: www.claw.net.nz/resources/irrigation (08/13/2015)
- “Solar-Powered Irrigation Systems – Stocktaking and Analysis Report” by German Technical Cooperation Agency (GIZ) (2015)
- Schultz and Suryani, 2015. EnDev2 Indonesia: Inspection Guide for Photovoltaic Village Power (PVVP) Systems. GIZ
SPIS tools
- SET UP 01 – PV Acceptance Test: Guideline to compare the installed with the actual capacity of the pump
- SET UP 02 – Workmanship Quality Checklist: Checklist for inspecting and verifying the workmanship quality
The following tools that are assigned to other Modules are also relevant:
- PROMOTE 01- SPIS Rapid Assessment: on the analysis of the market for service provision
- DESIGN 03- Pump Sizing Tool: to verify SPIS acceptance testing
- MAINTAIN 03- Water application uniformity test: that should be implemented directly after setting up the system
