Difference between revisions of "Concentrating Solar Power (CSP) - Technology"

From energypedia
***** (***** | *****)
(Created page with " {{tabs-3 |:Basics and Introduction CSP|Basics & Introduction |:Technology CSP|Technology |:CSP Planning|Planning }}<br/> [[File:CSP Icon.png|right|32px|Go back to the CSP Ov...")
 
***** (***** | *****)
m
 
(23 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
[[Concentrating_Solar_Power_(CSP)_-_Basics_and_Introduction|► Concentrating Solar Power (CSP) - Basics and Introduction]]<br/>
  
{{tabs-3
+
__TOC__
|:Basics and Introduction CSP|Basics & Introduction
 
|:Technology CSP|Technology
 
|:CSP Planning|Planning
 
}}<br/>
 
  
[[File:CSP Icon.png|right|32px|Go back to the CSP Overview|alt=Go back to the CSP Overview]]
+
= Overview =
  
{| cellspacing="2" cellpadding="5" border="0" style="width: 100%"
+
In <span class="mw-headline" id="Concentrating_Solar_Power_.28CSP.29">concentrating solar power (CSP)</span> power plant design there are four main collector technologies that are being applied. These technologies have to be picked site-specific and shall be discussed here. A good overview is provided by the [https://www.iea.org/ International Energy Agency] in its Technology Roadmap on Concentrating Solar Power.<br/>
|-
 
| style="width: 587px" | <div style="font-size:150%">CSP Technology<br/></div>
 
----
 
  
<br/>Concentrating Solar Power (CSP) is a type of Renewable Energy that uses the sun's energy to generate electricity and process heat. CSP plants can also be used for desalinization and Solar Fuels applications. Most applications are large-scale. Solar Thermal Power Plants are large scale renewable energy infrastructures using heat produced by contracted solar beams ('''Concentrated Solar Power (CSP)'''). Mirrors concentrate solar beam on a receiver. The produced heat with temperatures of 400ºC to 1000ºC can be used directly, be transformed into electricity or stored.
+
[[File:IEA Technology Roadmap CSP.png|thumb|center|400px|The four main CSP technologies in short]]<br/>CSP technology, being quite different from the more popular photovoltaic equpiment, concentrates sunlight to effectively create heat to raise steam. However, there are different types of technology working under title of CSP. In the following chapters, the idea of the “parabolic trough”, the “power tower”, the “Fresnel mirror system” (or simply “linear Fresnel”) and the “dish” will be presented.<br/>
  
 
<br/>
 
<br/>
 
| style="width: 151px" |
 
[[File:CSP Hybrid Plant in Israel.jpg|none|300px|alt=CSP Hybrid Plant in Israel.jpg]]
 
 
|}
 
 
----
 
 
In CSP power plant design there are four main collector technologies that are being applied. These technologies have to be picked site-specific and shall be discussed here. A good overview is provided by the [https://www.iea.org/ International Energy Agency] in its Technology Roadmap on Concentrating Solar Power.<br/>
 
 
[[File:IEA Technology Roadmap CSP.png|thumb|center|400px|The four main CSP technologies in short]]<br/>CSP technology, being quite different from the more popular photovoltaic equpiment, concentrates sunlight to effectively create heat to raise steam. However, there are different types of technology working under title of CSP. In the following chapters, the idea of the “parabolic trough”, the “power tower”, the “Fresnel mirror system” (or simply “linear Fresnel”) and the “dish” will be presented.
 
  
 
[[File:Greenpeace International Technologies CSP.png|thumb|center|500px|Greenpeace International 2009]]
 
[[File:Greenpeace International Technologies CSP.png|thumb|center|500px|Greenpeace International 2009]]
  
== Parabolic Trough<br/> ==
+
<br/>
  
These receivers are mobile applications. They are moving on a 1-axis-tracking system according to the sun's movement. It is a simpler application for tracking the sun than a point focus system (power tower or dishes) that needs to track the sun along two axes. This system, however, consists of parallel rows of reflectors or mirrors. Absorber tubes made of stainless steel serve as the heat collectors. The selective coating on these absorber tubes allows to absorb high levels of solar radiation while only few energy is lost again through infra-red radiation. The absorber tubes are insulated in an evacuated glass envelope. The heat transfer fluid used is synthetic oil. The oil is transferred through the tubes to a heat exchanger which heats and then superheats water into superheated steam. The steam is then expanded in a turbine which runs a generator to produce electricity. The water is then cooled, condenses and returns to the heat exchangers.
+
[[Concentrating Solar Power (CSP) - Technology#toc|►Go to Top]]<br/>
  
== Power Tower<br/> ==
+
= Parabolic Trough<br/> =
  
The power tower really lives up to its promise. Compared to other CSP technologies, it can create the highest degree of temperature. Surrounded by mirrors reflecting light onto an elevated and centered tower, the power tower generates heat of about 1,000 C°.<ref>Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 52</ref> By transferring the reflected concentrated solar radiation to a fluid, steam is being produced that expands on a turbine in order generate the intended electricity.<ref>Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 54</ref>
+
These receivers are mobile applications. They are moving on a 1-axis-tracking system according to the sun's movement. It is a simpler application for tracking the sun than a point focus system (power tower or dishes) that needs to track the sun along two axes. This system, however, consists of parallel rows of reflectors or mirrors. Absorber tubes made of stainless steel serve as the heat collectors. The selective coating on these absorber tubes allows to absorb high levels of solar radiation while only few energy is lost again through infra-red radiation. The absorber tubes are insulated in an evacuated glass envelope. The heat transfer fluid used is synthetic oil. The oil is transferred through the tubes to a heat exchanger which heats and then superheats water into superheated steam. The steam is then expanded in a turbine which runs a generator to produce electricity. The water is then cooled, condenses and returns to the heat exchangers.<br/>
  
<br/>
+
= Power Tower<br/> =
  
== Linear Fresnel ==
+
The power tower really lives up to its promise. Compared to other CSP technologies, it can create the highest degree of temperature. Surrounded by mirrors reflecting light onto an elevated and centered tower, the power tower generates heat of about 1,000 C°.<ref>Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 52</ref> By transferring the reflected concentrated solar radiation to a fluid, steam is being produced that expands on a turbine in order generate the intended electricity.<ref>Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 54</ref><br/>
  
This technology uses flat mirrors that are concentrating on one focal point. Water flows through the pipe which runs directly through the focal point of the mirrors. The Linear Fresnel arrangement approximates the parabolic shape of trough systems. It is a simple receiver design that facilitates direct steam generation. Thus, heat transfer fluids are not needed while applying this technology.
+
= Linear Fresnel =
  
<br/>
+
This technology uses flat mirrors that are concentrating on one focal point. Water flows through the pipe which runs directly through the focal point of the mirrors. The Linear Fresnel arrangement approximates the parabolic shape of trough systems. It is a simple receiver design that facilitates direct steam generation. Thus, heat transfer fluids are not needed while applying this technology.<br/>
  
== Dish / Engine<br/> ==
+
= Dish / Engine<br/> =
  
Parabolic dishes concetrate the sun's rays at a focal point in the centre of the dish. Most dishes use a 1-axis-trackig system, predominantly from north to south. The sun's energy, concentrated in the focal point, is given to a heat transfer fluid which is heated up to 750°C. Sometimes even gas transfer systems are applied. The fluid or gas is then used to drive a micro turbine or Stirling engine which is attached to the receiver.
+
Parabolic dishes concetrate the sun's rays at a focal point in the centre of the dish. Most dishes use a 1-axis-trackig system, predominantly from north to south. The sun's energy, concentrated in the focal point, is given to a heat transfer fluid which is heated up to 750°C. Sometimes even gas transfer systems are applied. The fluid or gas is then used to drive a micro turbine or Stirling engine which is attached to the receiver.<br/>
  
<br/>
+
= Comparison<br/> =
  
== Comparison<br/> ==
+
{| cellspacing="1" cellpadding="5" border="1" class="wikitable" style="width: 100%"
 
 
{| cellspacing="1" cellpadding="5" border="1" style="width: 100%" class="wikitable"
 
 
|-
 
|-
 
! scope="col" | <br/>
 
! scope="col" | <br/>
! scope="col" | [https://energypedia.info/Basics and Technology CSP#Parabolic Trough Parabolic Trough]<br/>
+
! scope="col" | Parabolic Trough<br/>
! scope="col" | [https://energypedia.info/Basics and Technology CSP#Power Tower Central Receiver/ Power Tower]<br/>
+
! scope="col" | Power Tower Central Receiver<br/>
! scope="col" | [https://energypedia.info/Basics and Technology CSP#Dish / Engine Parabolic Dish]<br/>
+
! scope="col" | Dish / Engine Parabolic Dish<br/>
! scope="col" | [https://energypedia.info/Basics and Technology CSP#Linear Fresnel Fresnel Linear Reflector]<br/>
+
! scope="col" | Linear Fresnel Fresnel Linear Reflector<br/>
 
|-
 
|-
 
| Applications<br/>
 
| Applications<br/>
Line 69: Line 50:
 
|-
 
|-
 
| Advantages<br/>
 
| Advantages<br/>
| • Commercially available<br/>– over 16 billion kWh of<br/>operational experience;<br/>operating temperature<br/>potential up to 500°C<br/>(400°C commercially<br/>proven)<br/>• Commercially proven<br/>annual net plant<br/>efficiency of 14% (solar<br/>radiation to net electric<br/>output)<br/>• Commercially proven<br/>investment and<br/>operating costs<br/>• Modularity<br/>• Good land-use factor<br/>• Lowest materials<br/>demand<br/>• Hybrid concept proven<br/>• Storage capability
+
| • Commercially available<br/>– over 16 billion kWh of<br/>operational experience;<br/>operating temperature<br/>potential up to 500°C<br/>(400°C commercially<br/>proven)<br/>• Commercially proven<br/>annual net plant<br/>efficiency of 14% (solar<br/>radiation to net electric<br/>output)<br/>• Commercially proven<br/>investment and<br/>operating costs<br/>• Modularity<br/>• Good land-use factor<br/>• Lowest materials<br/>demand<br/>• Hybrid concept proven<br/>• Storage capability<br/>
 
| • Good mid-term<br/>prospects for<br/>high conversion<br/>efficiencies, operating<br/>temperature potential<br/>beyond 1,000°C (565°C<br/>proven at 10 MW scale)<br/>• Storage at high<br/>temperatures<br/>• Hybrid operation<br/>possible<br/>• Better suited for dry<br/>cooling concepts than<br/>troughs and Fresnel<br/>• Better options to use<br/>non-flat sites
 
| • Good mid-term<br/>prospects for<br/>high conversion<br/>efficiencies, operating<br/>temperature potential<br/>beyond 1,000°C (565°C<br/>proven at 10 MW scale)<br/>• Storage at high<br/>temperatures<br/>• Hybrid operation<br/>possible<br/>• Better suited for dry<br/>cooling concepts than<br/>troughs and Fresnel<br/>• Better options to use<br/>non-flat sites
 
| • Very high conversion<br/>efficiencies – peak solar<br/>to net electric<br/>conversion over 30%<br/>• Modularity<br/>• Most effectively<br/>integrate thermal<br/>storage a large plant<br/>• Operational experience<br/>of first demonstration<br/>projects<br/>• Easily manufactured<br/>and mass-produced<br/>from available parts<br/>• No water requirements<br/>for cooling the cycle
 
| • Very high conversion<br/>efficiencies – peak solar<br/>to net electric<br/>conversion over 30%<br/>• Modularity<br/>• Most effectively<br/>integrate thermal<br/>storage a large plant<br/>• Operational experience<br/>of first demonstration<br/>projects<br/>• Easily manufactured<br/>and mass-produced<br/>from available parts<br/>• No water requirements<br/>for cooling the cycle
Line 75: Line 56:
 
|-
 
|-
 
| Disadvantages<br/>
 
| Disadvantages<br/>
| • The use of oil-based<br/>heat transfer media<br/>restricts operating<br/>temperatures today to<br/>400°C, resulting<br/>in only moderate steam<br/>qualities
+
| • The use of oil-based<br/>heat transfer media<br/>restricts operating<br/>temperatures today to<br/>400°C, resulting<br/>in only moderate steam<br/>qualities<br/>
 
| • Projected annual<br/>performance values,<br/>investment and<br/>operating costs need<br/>wider scale proof in<br/>commercial operation
 
| • Projected annual<br/>performance values,<br/>investment and<br/>operating costs need<br/>wider scale proof in<br/>commercial operation
 
| • No large-scale<br/>commercial examples<br/>• Projected cost goals of<br/>mass production still to<br/>be proven<br/>• Lower dispatchability<br/>potential for grid<br/>integration<br/>• Hybrid receivers still an<br/>R&D goal
 
| • No large-scale<br/>commercial examples<br/>• Projected cost goals of<br/>mass production still to<br/>be proven<br/>• Lower dispatchability<br/>potential for grid<br/>integration<br/>• Hybrid receivers still an<br/>R&D goal
 
| • Recent market entrant,<br/>only small projects<br/>operating
 
| • Recent market entrant,<br/>only small projects<br/>operating
 
|-
 
|-
| colspan="5" style="text-align: right" | Source: [https://energypedia.info/Greenpeace International Concentrating Solar Power Global Outlook Greenpeace International 2009]<br/>
+
| colspan="5" | Source: [[Concentrating Solar Power - Global Outlook 2009|International Concentrating Solar Power Global Outlook Greenpeace International 2009]]<br/>
 
|}
 
|}
  
 
<br/>
 
<br/>
  
<br/>
+
= Storage Techologies<br/> =
 +
 
 +
Using different approaches to store the excess solar energy into '''thermal energy storages (TES)''' it is possible to run a CSP plant around the clock, 24 hours a day and therefore in baseload. For storing thermal energy so-called Phase Change Materials (i.e. water) are applied to make use of the latent heat. In addition thermal-chemical storages can offer even higher storage capacities making use of the chemical reactions taking place due to adsorption and absorption. A commonly used TES is molten salt while other TES are currently under investigation (see [https://www1.eere.energy.gov/solar/sunshot/csp_storage_ussh.html SunShot Initiative]).
 +
 
 +
 
 +
= Further Information =
 +
 
 +
*[[Concentrating_Solar_Power_(CSP)_-_Basics_and_Introduction|Concentrating Solar Power (CSP) - Basics and Introduction]]
  
== Storage Techologies<br/> ==
+
*[[Concentrating_Solar_Power_(CSP)_-_Planning|Concentrating Solar Power (CSP) - Planning]]
  
Using different approaches to store the excess solar energy into thermal energy storages (TES) it is possible to run a CSP plant around the clock, 24 hours a day and therefore in baseload. For storing thermal energy so-called Phase Change Materials (i.e. water) are applied to make use of the latent heat. In addition thermal-chemical storages can offer even higher storage capacities making use of the chemical reactions taking place due to adsorption and absorption. A commonly used TES is molten salt while other TES are currently under investigation (see [https://www1.eere.energy.gov/solar/sunshot/csp_storage_ussh.html SunShot Initiative]).<br/>
+
*[[:File:Concentrating Solar Power - Technology Road Map.pdf|IEA Road Map for CSP Technology]]
  
<br/>
 
  
 
= References<br/> =
 
= References<br/> =
  
 
<references /><br/>
 
<references /><br/>
 
__NOTITLE__
 
  
 
[[Category:Concentrating_Solar_Power_(CSP)]]
 
[[Category:Concentrating_Solar_Power_(CSP)]]

Latest revision as of 12:44, 21 July 2016

► Concentrating Solar Power (CSP) - Basics and Introduction

Overview

In concentrating solar power (CSP) power plant design there are four main collector technologies that are being applied. These technologies have to be picked site-specific and shall be discussed here. A good overview is provided by the International Energy Agency in its Technology Roadmap on Concentrating Solar Power.

The four main CSP technologies in short


CSP technology, being quite different from the more popular photovoltaic equpiment, concentrates sunlight to effectively create heat to raise steam. However, there are different types of technology working under title of CSP. In the following chapters, the idea of the “parabolic trough”, the “power tower”, the “Fresnel mirror system” (or simply “linear Fresnel”) and the “dish” will be presented.


Greenpeace International 2009


►Go to Top

Parabolic Trough

These receivers are mobile applications. They are moving on a 1-axis-tracking system according to the sun's movement. It is a simpler application for tracking the sun than a point focus system (power tower or dishes) that needs to track the sun along two axes. This system, however, consists of parallel rows of reflectors or mirrors. Absorber tubes made of stainless steel serve as the heat collectors. The selective coating on these absorber tubes allows to absorb high levels of solar radiation while only few energy is lost again through infra-red radiation. The absorber tubes are insulated in an evacuated glass envelope. The heat transfer fluid used is synthetic oil. The oil is transferred through the tubes to a heat exchanger which heats and then superheats water into superheated steam. The steam is then expanded in a turbine which runs a generator to produce electricity. The water is then cooled, condenses and returns to the heat exchangers.

Power Tower

The power tower really lives up to its promise. Compared to other CSP technologies, it can create the highest degree of temperature. Surrounded by mirrors reflecting light onto an elevated and centered tower, the power tower generates heat of about 1,000 C°.[1] By transferring the reflected concentrated solar radiation to a fluid, steam is being produced that expands on a turbine in order generate the intended electricity.[2]

Linear Fresnel

This technology uses flat mirrors that are concentrating on one focal point. Water flows through the pipe which runs directly through the focal point of the mirrors. The Linear Fresnel arrangement approximates the parabolic shape of trough systems. It is a simple receiver design that facilitates direct steam generation. Thus, heat transfer fluids are not needed while applying this technology.

Dish / Engine

Parabolic dishes concetrate the sun's rays at a focal point in the centre of the dish. Most dishes use a 1-axis-trackig system, predominantly from north to south. The sun's energy, concentrated in the focal point, is given to a heat transfer fluid which is heated up to 750°C. Sometimes even gas transfer systems are applied. The fluid or gas is then used to drive a micro turbine or Stirling engine which is attached to the receiver.

Comparison


Parabolic Trough
Power Tower Central Receiver
Dish / Engine Parabolic Dish
Linear Fresnel Fresnel Linear Reflector
Applications
Grid-connected plants,
mid to high-process
heat
(Highest single unit solar capacity to date: 80
MWe.
Total capacity built:
over 500 MW and more than 10 GW under construction or proposed)
Grid-connected plants,
high temperature
process heat
(Highest single unit solar capacity to date: 20 MWe
under construction, Total capacity ~50MW with at least 100MW under
development)
Stand-alone, small
off-grid power systems or
clustered to larger gridconnected
dish parks
(Highest single unit solar capacity to date: 100 kWe, Proposals for
100MW and 500 MW in Australia and US)
Grid connected plants, or
steam generation to be
used in conventional
thermal power plants.
(Highest single unit solar capacity to date is 5MW
in US, with 177 MW
installation under
development)
Advantages
• Commercially available
– over 16 billion kWh of
operational experience;
operating temperature
potential up to 500°C
(400°C commercially
proven)
• Commercially proven
annual net plant
efficiency of 14% (solar
radiation to net electric
output)
• Commercially proven
investment and
operating costs
• Modularity
• Good land-use factor
• Lowest materials
demand
• Hybrid concept proven
• Storage capability
• Good mid-term
prospects for
high conversion
efficiencies, operating
temperature potential
beyond 1,000°C (565°C
proven at 10 MW scale)
• Storage at high
temperatures
• Hybrid operation
possible
• Better suited for dry
cooling concepts than
troughs and Fresnel
• Better options to use
non-flat sites
• Very high conversion
efficiencies – peak solar
to net electric
conversion over 30%
• Modularity
• Most effectively
integrate thermal
storage a large plant
• Operational experience
of first demonstration
projects
• Easily manufactured
and mass-produced
from available parts
• No water requirements
for cooling the cycle
• Readily available
• Flat mirrors can be
purchased and bent
on site, lower
manufacturing costs
• Hybrid operation
possible
• Very high spaceefficiency
around
solar noon.
Disadvantages
• The use of oil-based
heat transfer media
restricts operating
temperatures today to
400°C, resulting
in only moderate steam
qualities
• Projected annual
performance values,
investment and
operating costs need
wider scale proof in
commercial operation
• No large-scale
commercial examples
• Projected cost goals of
mass production still to
be proven
• Lower dispatchability
potential for grid
integration
• Hybrid receivers still an
R&D goal
• Recent market entrant,
only small projects
operating
Source: International Concentrating Solar Power Global Outlook Greenpeace International 2009


Storage Techologies

Using different approaches to store the excess solar energy into thermal energy storages (TES) it is possible to run a CSP plant around the clock, 24 hours a day and therefore in baseload. For storing thermal energy so-called Phase Change Materials (i.e. water) are applied to make use of the latent heat. In addition thermal-chemical storages can offer even higher storage capacities making use of the chemical reactions taking place due to adsorption and absorption. A commonly used TES is molten salt while other TES are currently under investigation (see SunShot Initiative).


Further Information


References

  1. Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 52
  2. Taggart, S. (2008), “Hot Stuff: CSP and the Power Tower”, in: Renewable Energy Focus, May/June 2008, pg. 54