SPIS Toolbox - Set Up - Further Readings
From energypedia
Revision as of 10:07, 22 September 2017 by ***** (***** | *****)
Further Reading, Links and Tools
Links
- Centre for Land and Water: Knowledge Resources for Primary Industry. Retrieved from http://www.claw.net.nz/resources/irrigation/
- Hahn, A., Sass, J. & Fröhlich, C. (2015): Manual and tools for promoting SPIS. Multicountry - Stocktaking and Analysis Report. GFA Consulting Group. Retrieved from ...
- Schultz, R. & Suryani, A. (2015): EnDev2 Indonesia: Inspection Guide for Photovoltaic Village Power (PVVP) Systems. Edited by GIZ. Retrieved from https://energypedia.info/images/3/39/Inspection_Guide_for_PVVP_150524_(GIZ_2015).pdf
SPIS tools
- SET UP – PVP Acceptance Test: Guideline to compare the installed with the actual capacity of the pump
- SET UP – Workmanship Quality Checklist: Checklist for inspecting and verifying the workmanship quality
The following tools that are assigned to other Modules are also relevant:
- PROMOTE + INITIATE – SPIS Rapid Assessment Tool: on the analysis of the market for service provision
- DESIGN – Pump Sizing Tool: to verify SPIS acceptance testing
- MAINTAIN – Water Application Uniformity Guide: that should be implemented directly after setting up the system
